openwrt/target/linux/ath79/dts/ar7161_ruckus_gd11.dtsi
Rosen Penev 9783340af9 ath79: ar: convert to nvmem-layout
Will allow removing deprecated mac-address-increment.

Signed-off-by: Rosen Penev <rosenp@gmail.com>
2023-11-25 21:34:18 -08:00

226 lines
4.1 KiB
Plaintext

// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
#include "ar7100.dtsi"
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/input/input.h>
/ {
compatible = "ruckus,gd11", "qca,ar7161";
aliases {
led-boot = &led_power_green;
led-failsafe = &led_power_red;
led-running = &led_power_green;
led-upgrade = &led_power_red;
label-mac-device = &eth0;
};
keys: keys {
compatible = "gpio-keys";
reset {
label = "reset";
linux,code = <KEY_RESTART>;
gpios = <&gpio 8 GPIO_ACTIVE_LOW>;
debounce-interval = <60>;
};
};
leds {
compatible = "gpio-leds";
dir-green {
label = "green:dir";
gpios = <&gpio 6 GPIO_ACTIVE_HIGH>;
};
opt-green {
label = "green:opt";
gpios = <&gpio 7 GPIO_ACTIVE_HIGH>;
};
led_power_green: power-green {
label = "green:power";
gpios = <&gpio 0 GPIO_ACTIVE_HIGH>;
default-state = "on";
};
led_power_red: power-red {
label = "red:power";
gpios = <&gpio 1 GPIO_ACTIVE_HIGH>;
panic-indicator;
};
wlan2g-green {
label = "green:wlan2g";
gpios = <&gpio 2 GPIO_ACTIVE_HIGH>;
linux,default-trigger = "phy0assoc";
};
wlan2g-yellow {
label = "yellow:wlan2g";
gpios = <&gpio 3 GPIO_ACTIVE_HIGH>;
linux,default-trigger = "phy0tpt";
};
wlan5g-green {
label = "green:wlan5g";
gpios = <&gpio 4 GPIO_ACTIVE_HIGH>;
linux,default-trigger = "phy1assoc";
};
wlan5g-yellow {
label = "yellow:wlan5g";
gpios = <&gpio 5 GPIO_ACTIVE_HIGH>;
linux,default-trigger = "phy1tpt";
};
};
reserved-memory {
#address-cells = <1>;
#size-cells = <1>;
ranges;
ruckus-himem@3ff0000 {
/* Ruckus Himem area used to control
* redundant boot image selection
*/
compatible = "nvmem-rmem";
reg = <0x3ff0000 0x10000>;
no-map;
};
};
beamforming-2g-spi {
compatible = "spi-gpio";
mosi-gpios = <&ath9k0 5 GPIO_ACTIVE_HIGH>;
sck-gpios = <&ath9k0 6 GPIO_ACTIVE_HIGH>;
num-chipselects = <0>;
#address-cells = <1>;
#size-cells = <0>;
beamforming_2g_gpio: beamforming-2g-gpio@0 {
compatible = "fairchild,74hc595";
reg = <0>;
registers-number = <1>;
spi-max-frequency = <24000000>;
gpio-controller;
#gpio-cells = <2>;
};
};
beamforming-5g-spi {
compatible = "spi-gpio";
mosi-gpios = <&ath9k1 5 GPIO_ACTIVE_HIGH>;
sck-gpios = <&ath9k1 6 GPIO_ACTIVE_HIGH>;
num-chipselects = <0>;
#address-cells = <1>;
#size-cells = <0>;
beamforming_5g_gpio: beamforming-5g-gpio@0 {
compatible = "fairchild,74hc595";
reg = <0>;
registers-number = <1>;
spi-max-frequency = <24000000>;
gpio-controller;
#gpio-cells = <2>;
};
};
};
&pcie0 {
status = "okay";
ath9k0: wifi@0,11 { /* 2.4 GHz */
compatible = "pci168c,0029";
reg = <0x8800 0 0 0 0>;
nvmem-cells = <&macaddr_bdata_60>;
nvmem-cell-names = "mac-address";
#gpio-cells = <2>;
gpio-controller;
};
ath9k1: wifi@0,12 { /* 5 GHz */
compatible = "pci168c,0029";
reg = <0x9000 0 0 0 0>;
nvmem-cells = <&macaddr_bdata_76>;
nvmem-cell-names = "mac-address";
#gpio-cells = <2>;
gpio-controller;
};
};
&mdio0 {
status = "okay";
phy0: ethernet-phy@1e {
reg = <0x1e>;
};
};
&eth0 {
status = "okay";
nvmem-cells = <&macaddr_bdata_66>;
nvmem-cell-names = "mac-address";
pll-data = <0x00110000 0x00001099 0x00991099>;
phy-handle = <&phy0>;
phy-mode = "rgmii-id";
};
&spi {
status = "okay";
flash@0 {
compatible = "jedec,spi-nor";
reg = <0>;
spi-max-frequency = <104000000>;
m25p,fast-read;
partitions {
compatible = "fixed-partitions";
#address-cells = <1>;
#size-cells = <1>;
partition@0 {
reg = <0x0 0x40000>;
label = "u-boot";
read-only;
};
/* On stock FW this encompasses rcks_wlan.main,
* rcks_wlan.bkup and datafs partitions
*/
partition@40000 {
compatible = "openwrt,uimage", "denx,uimage";
reg = <0x40000 0xf40000>;
label = "firmware";
};
partition@f80000 {
compatible = "u-boot,env";
reg = <0xf80000 0x40000>;
label = "u-boot-env";
};
board_data: partition@fc0000 {
reg = <0xfc0000 0x40000>;
label = "board-data";
read-only;
};
};
};
};
&usb1 {
status = "okay";
};
&usb2 {
status = "okay";
};
&usb_phy {
status = "okay";
};