mirror of
https://github.com/openwrt/openwrt.git
synced 2024-12-23 15:32:33 +00:00
c9f51a9ad6
TP-Link EAP225-Wall v2 is an AC1200 (802.11ac Wave-2) wall plate access point. UART access and debricking require fine soldering. The device was kindly provided for porting by Stijn Segers. Device specifications: * SoC: QCA9561 @ 775MHz * RAM: 128MiB DDR2 * Flash: 16MiB SPI-NOR (GD25Q127CSIG) * Wireless 2.4GHz (SoC): b/g/n, 2x2 * Wireless 5Ghz (QCA9886): a/n/ac, 2x2 MU-MIMO * Ethernet (SoC): 4× 100Mbps * Eth0 (back): 802.3af/at PoE in * Eth1, Eth2 (bottom) * Eth3 (bottom): PoE out (can be toggled by GPIO) * One status LED * Two buttons (both work as failsafe) * LED button, implemented as KEY_BRIGHTNESS_TOGGLE * Reset button Flashing instructions, requires recent firmware (tested on 1.20.0): * ssh into target device and run `cliclientd stopcs` * Upgrade with factory image via web interface Debricking: * Serial port can be soldered on PCB J4 (1: TXD, 2: RXD, 3: GND, 4: VCC) * Bridge unpopulated resistors R162 (TXD) and R165 (RXD) Do NOT bridge R164 * Use 3.3V, 115200 baud, 8n1 * Interrupt bootloader by holding CTRL+B during boot * tftp initramfs to flash via sysupgrade or LuCI web interface MAC addresses: MAC address (as on device label) is stored in device info partition at an offset of 8 bytes. ath9k device has same address as ethernet, ath10k uses address incremented by 1. From OEM ifconfig: br0 Link encap:Ethernet HWaddr 50:...:04 eth0 Link encap:Ethernet HWaddr 50:...:04 wifi0 Link encap:UNSPEC HWaddr 50-...-04-... wifi1 Link encap:UNSPEC HWaddr 50-...-05-... Signed-off-by: Sander Vanheule <sander@svanheule.net> [fix IMAGE_SIZE] Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de> |
||
---|---|---|
.. | ||
autoconf | ||
autoconf-archive | ||
automake | ||
b43-tools | ||
bc | ||
bison | ||
cbootimage | ||
cbootimage-configs | ||
ccache | ||
cmake | ||
coreutils | ||
dosfstools | ||
e2fsprogs | ||
elftosb | ||
expat | ||
fakeroot | ||
findutils | ||
firmware-utils | ||
flex | ||
flock | ||
genext2fs | ||
gengetopt | ||
gmp | ||
include | ||
isl | ||
kernel2minor | ||
libelf | ||
libressl | ||
libtool | ||
lzma | ||
lzma-old | ||
m4 | ||
make-ext4fs | ||
missing-macros | ||
mkimage | ||
mklibs | ||
mm-macros | ||
mpc | ||
mpfr | ||
mtd-utils | ||
mtools | ||
padjffs2 | ||
patch | ||
patch-image | ||
patchelf | ||
pkgconf | ||
qemu | ||
quilt | ||
sdimage | ||
sed | ||
sparse | ||
squashfs | ||
squashfskit4 | ||
sstrip | ||
tar | ||
xz | ||
zip | ||
zlib | ||
zstd | ||
Makefile |