Sungbo Eo 38bdfcdb87 ramips: add support for ipTIME A104ns ... ipTIME A104ns is a 2.4/5GHz band AC750 router, based on MediaTek MT7620A. Specifications: - SoC: MT7620A - RAM: DDR2 64MB - Flash: SPI NOR 8MB - WiFi: - 2.4GHz: SoC internal - 5GHz: MT7610EN - Ethernet: 5x 10/100Mbps - Switch: SoC internal - USB: 1x 2.0 - UART: - J2: 3.3V, TX, RX, GND (3.3V is the square pad) / 57600 8N1 Installation via web interface: 1. Flash **initramfs** image through the stock web interface. 2. Boot into OpenWrt and perform sysupgrade with sysupgrade image. Revert to stock firmware: 1. Perform sysupgrade with stock image. In contrast to to-be-supported A1004ns, the A104ns has no usable value in 0x1fc40 (uboot), so wan_mac needs to be calculated. Also note that GPIOs for the LEDs really are inverted compared to the A1004ns. Signed-off-by: Sungbo Eo <mans0n@gorani.run> [moved state_default to device DTS, reordered properties in wmac, added comment about wan_mac and LED GPIOs] Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>		2019-12-17 13:36:11 +01:00
..
base-files	ramips: add support for ipTIME A104ns	2019-12-17 13:36:11 +01:00
profiles	treewide: remove kmod-usb-core from DEVICE_PACKAGES	2019-10-06 21:28:49 +02:00
config-4.14	ramips: use upstream RAW_APPENDED_DTB instead of our OWRTDTB	2019-07-08 22:00:24 +02:00
target.mk	ramips: Add support for Head Weblink HDRM200	2019-05-17 21:41:43 +02:00