Gabor Juhos 258b2f2dc2 generic: ar8216: remove an unblanced mutex_unlock call ... Fixes the following warning: [ 94.080000] [ 94.080000] ===================================== [ 94.080000] [ BUG: bad unlock balance detected! ] [ 94.080000] 3.3.8 #2 Tainted: G O [ 94.080000] ------------------------------------- [ 94.080000] swconfig/1220 is trying to release lock (&priv->mib_lock) at: [ 94.080000] [<801df8f4>] ar8216_sw_get_port_mib+0x138/0x16c [ 94.080000] but there are no more locks to release! [ 94.080000] [ 94.080000] other info that might help us debug this: [ 94.080000] 2 locks held by swconfig/1220: [ 94.080000] #0: (genl_mutex){+.+...}, at: [<80222430>] genl_rcv+0x14/0x34 [ 94.080000] #1: (&dev->sw_mutex){+.+...}, at: [<801da018>] swconfig_get_dev+0x88/0xb4 [ 94.080000] [ 94.080000] stack backtrace: [ 94.080000] Call Trace: [ 94.080000] [<8028dc58>] dump_stack+0x8/0x34 [ 94.080000] [<800a5128>] print_unlock_inbalance_bug+0xe0/0xfc [ 94.080000] [<800a82c0>] lock_release+0x18c/0x1c8 [ 94.080000] [<80292074>] __mutex_unlock_slowpath+0xd8/0x17c [ 94.080000] [<801df8f4>] ar8216_sw_get_port_mib+0x138/0x16c [ 94.080000] [<801db688>] swconfig_get_attr+0xbc/0x394 [ 94.080000] [<8022261c>] genl_rcv_msg+0x1cc/0x214 [ 94.080000] [<80221a18>] netlink_rcv_skb+0x6c/0xe8 [ 94.080000] [<80222440>] genl_rcv+0x24/0x34 [ 94.080000] [<80221370>] netlink_unicast+0x15c/0x22c [ 94.080000] [<8022175c>] netlink_sendmsg+0x240/0x2d0 [ 94.080000] [<801ef544>] sock_sendmsg+0x84/0x9c [ 94.080000] [<801f0648>] __sys_sendmsg+0x1cc/0x270 [ 94.080000] [<801f207c>] sys_sendmsg+0x48/0x7c [ 94.080000] [<8006ad78>] stack_done+0x20/0x40 [ 94.080000] Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 34282		2012-11-20 20:40:03 +00:00
..
adm6996.c	(respin) 802.1Q VLAN support for ADM6996M/ADM6996FC	2011-05-09 15:21:58 +00:00
adm6996.h	(respin) 802.1Q VLAN support for ADM6996M/ADM6996FC	2011-05-09 15:21:58 +00:00
ar8216.c	generic: ar8216: remove an unblanced mutex_unlock call	2012-11-20 20:40:03 +00:00
ar8216.h	generic: ar8216: add MIB counter support for the AR8216 switch as well	2012-11-18 16:21:00 +00:00
ip17xx.c	unify extended vlan id swconfig attributes. AR8216 and PSB6970 used "pvid", IP17xx used "tag" and RTL8306 called it "vid". Change all to "vid" and annotate the description with the valid ID range.	2010-10-12 20:49:35 +00:00
micrel.c	ar71xx: move micrel PHY driver to the generic linux target	2012-03-15 09:25:53 +00:00
mvswitch.c	kernel: rewrite the phy packet hook, put it in the network stack to avoid having to keep non-upstream ethernet driver changes	2012-05-06 21:19:14 +00:00
mvswitch.h	rename target/linux/generic-2.6 to generic	2010-06-26 20:42:58 +00:00
psb6970.c	unify extended vlan id swconfig attributes. AR8216 and PSB6970 used "pvid", IP17xx used "tag" and RTL8306 called it "vid". Change all to "vid" and annotate the description with the valid ID range.	2010-10-12 20:49:35 +00:00
rtl8306.c	rtl8306: do not overwrite registers in the phy fixup, it could mess up other switches (fixes #8911)	2011-04-02 16:35:22 +00:00
rtl8366_smi.c	generic: rtl8366_smi: increase delay after switch hw reset	2012-08-10 06:32:00 +00:00
rtl8366_smi.h	generic: rtl836x: add hw_reset field to struct rtl8366_smi	2012-08-02 09:54:21 +00:00
rtl8366rb.c	generic: rtl836x: add hw_reset field to struct rtl8366_smi	2012-08-02 09:54:21 +00:00
rtl8366s.c	generic: rtl836x: add hw_reset field to struct rtl8366_smi	2012-08-02 09:54:21 +00:00
rtl8367.c	generic: rtl836x: add hw_reset field to struct rtl8366_smi	2012-08-02 09:54:21 +00:00
rtl8367b.c	generic: add driver for the the RTL8367R{B,-VB} switches	2012-10-18 07:22:56 +00:00
swconfig_leds.c	generic: swconfig: use led_set_brightness in LED control code	2012-10-26 18:58:18 +00:00
swconfig.c	swconfig: get rid of the NLA_PUT_* macros	2012-10-24 13:05:04 +00:00