openwrt/target/linux/brcm63xx/patches-3.7/426-SPI-MIPS-BCM63XX-Add-HS-SPI-driver.patch

From 4b27423676485d05bcd6fc6f3809164fb8f9d22d Mon Sep 17 00:00:00 2001
From: Jonas Gorski <jonas.gorski@gmail.com>
Date: Sat, 12 Nov 2011 12:19:55 +0100
Subject: [PATCH 30/60] SPI: MIPS: BCM63XX: Add HSSPI driver

Add a driver for the High Speed SPI controller found on newer BCM63XX SoCs.

Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>
---
 .../include/asm/mach-bcm63xx/bcm63xx_dev_hsspi.h   |    2 +
 drivers/spi/Kconfig                                |    7 +
 drivers/spi/Makefile                               |    1 +
 drivers/spi/spi-bcm63xx-hsspi.c                    |  427 ++++++++++++++++++++
 4 files changed, 437 insertions(+), 0 deletions(-)
 create mode 100644 drivers/spi/spi-bcm63xx-hsspi.c

--- a/arch/mips/include/asm/mach-bcm63xx/bcm63xx_dev_hsspi.h
+++ b/arch/mips/include/asm/mach-bcm63xx/bcm63xx_dev_hsspi.h
@@ -17,4 +17,6 @@ struct bcm63xx_hsspi_pdata {
 
 #define HSSPI_PLL_HZ_6328	133333333
 
+#define HSSPI_BUFFER_LEN   	512
+
 #endif /* BCM63XX_DEV_HSSPI_H */
--- a/drivers/spi/Kconfig
+++ b/drivers/spi/Kconfig
@@ -100,6 +100,13 @@ config SPI_BCM63XX
 	help
           Enable support for the SPI controller on the Broadcom BCM63xx SoCs.
 
+config SPI_BCM63XX_HSSPI
+	tristate "Broadcom BCM63XX HS SPI controller driver"
+	depends on BCM63XX
+	help
+	  This enables support for the High Speed SPI controller present on
+	  newer Broadcom BCM63XX SoCs.
+
 config SPI_BITBANG
 	tristate "Utilities for Bitbanging SPI masters"
 	help
--- a/drivers/spi/Makefile
+++ b/drivers/spi/Makefile
@@ -15,6 +15,7 @@ obj-$(CONFIG_SPI_ATMEL)			+= spi-atmel.o
 obj-$(CONFIG_SPI_ATH79)			+= spi-ath79.o
 obj-$(CONFIG_SPI_AU1550)		+= spi-au1550.o
 obj-$(CONFIG_SPI_BCM63XX)		+= spi-bcm63xx.o
+obj-$(CONFIG_SPI_BCM63XX_HSSPI)		+= spi-bcm63xx-hsspi.o
 obj-$(CONFIG_SPI_BFIN5XX)		+= spi-bfin5xx.o
 obj-$(CONFIG_SPI_BFIN_SPORT)		+= spi-bfin-sport.o
 obj-$(CONFIG_SPI_BITBANG)		+= spi-bitbang.o
--- /dev/null
+++ b/drivers/spi/spi-bcm63xx-hsspi.c
@@ -0,0 +1,427 @@
+/*
+ * Broadcom BCM63XX High Speed SPI Controller driver
+ *
+ * Copyright 2000-2010 Broadcom Corporation
+ * Copyright 2012 Jonas Gorski <jonas.gorski@gmail.com>
+ *
+ * Licensed under the GNU/GPL. See COPYING for details.
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/io.h>
+#include <linux/clk.h>
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/delay.h>
+#include <linux/dma-mapping.h>
+#include <linux/err.h>
+#include <linux/interrupt.h>
+#include <linux/spi/spi.h>
+#include <linux/workqueue.h>
+
+#include <bcm63xx_regs.h>
+#include <bcm63xx_dev_hsspi.h>
+
+#define HSSPI_OP_CODE_SHIFT	13
+#define HSSPI_OP_SLEEP		(0 << HSSPI_OP_CODE_SHIFT)
+#define HSSPI_OP_READ_WRITE	(1 << HSSPI_OP_CODE_SHIFT)
+#define HSSPI_OP_WRITE		(2 << HSSPI_OP_CODE_SHIFT)
+#define HSSPI_OP_READ		(3 << HSSPI_OP_CODE_SHIFT)
+
+#define HSSPI_MAX_PREPEND_LEN	15
+
+#define HSSPI_MAX_SYNC_CLOCK	30000000
+
+struct bcm63xx_hsspi {
+	struct completion	done;
+	struct spi_transfer	*curr_trans;
+
+	struct platform_device  *pdev;
+	struct clk		*clk;
+	void __iomem		*regs;
+	u8 __iomem		*fifo;
+
+	u32			speed_hz;
+	int			irq;
+};
+
+static void bcm63xx_hsspi_set_clk(struct bcm63xx_hsspi *bs, int hz,
+				  int profile)
+{
+	u32 reg;
+
+	reg = DIV_ROUND_UP(2048, DIV_ROUND_UP(bs->speed_hz, hz));
+	bcm_hsspi_writel(CLK_CTRL_ACCUM_RST_ON_LOOP | reg,
+			 HSSPI_PROFILE_CLK_CTRL_REG(profile));
+
+	reg = bcm_hsspi_readl(HSSPI_PROFILE_SIGNAL_CTRL_REG(profile));
+	if (hz > HSSPI_MAX_SYNC_CLOCK)
+		reg |= SIGNAL_CTRL_ASYNC_INPUT_PATH;
+	else
+		reg &= ~SIGNAL_CTRL_ASYNC_INPUT_PATH;
+	bcm_hsspi_writel(reg, HSSPI_PROFILE_SIGNAL_CTRL_REG(profile));
+}
+
+static int bcm63xx_hsspi_do_txrx(struct spi_device *spi,
+				 struct spi_transfer *t1,
+				 struct spi_transfer *t2)
+{
+	struct bcm63xx_hsspi *bs = spi_master_get_devdata(spi->master);
+	u8 chip_select = spi->chip_select;
+	u16 opcode = 0;
+	int len, prepend_size = 0;
+
+	init_completion(&bs->done);
+
+	bs->curr_trans = t2 ? t2 : t1;
+	bcm63xx_hsspi_set_clk(bs, bs->curr_trans->speed_hz, chip_select);
+
+	if (t2 && !t2->tx_buf)
+		prepend_size = t1->len;
+
+	bcm_hsspi_writel(prepend_size << MODE_CTRL_PREPENDBYTE_CNT_SHIFT |
+			 2 << MODE_CTRL_MULTIDATA_WR_STRT_SHIFT |
+			 2 << MODE_CTRL_MULTIDATA_RD_STRT_SHIFT | 0xff,
+			 HSSPI_PROFILE_MODE_CTRL_REG(chip_select));
+
+	if (t1->rx_buf && t1->tx_buf)
+		opcode = HSSPI_OP_READ_WRITE;
+	else if (t1->rx_buf || (t2 && t2->rx_buf))
+		opcode = HSSPI_OP_READ;
+	else if (t1->tx_buf)
+		opcode = HSSPI_OP_WRITE;
+
+	if (opcode == HSSPI_OP_READ && t2)
+		len = t2->len;
+	else
+		len = t1->len;
+
+	if (t1->tx_buf) {
+		memcpy_toio(bs->fifo + 2, t1->tx_buf, t1->len);
+		if (t2 && t2->tx_buf) {
+			memcpy_toio(bs->fifo + 2 + t1->len,
+				    t2->tx_buf, t2->len);
+			len += t2->len;
+		}
+	}
+
+	opcode |= len;
+	memcpy_toio(bs->fifo, &opcode, sizeof(opcode));
+
+	/* enable interrupt */
+	bcm_hsspi_writel(HSSPI_PING0_CMD_DONE, HSSPI_INT_MASK_REG);
+
+	/* start the transfer */
+	bcm_hsspi_writel(chip_select << PINGPONG_CMD_SS_SHIFT |
+			 chip_select << PINGPONG_CMD_PROFILE_SHIFT |
+			 PINGPONG_COMMAND_START_NOW,
+			 HSSPI_PINGPONG_COMMAND_REG(0));
+
+	if (wait_for_completion_timeout(&bs->done, HZ) == 0) {
+		dev_err(&bs->pdev->dev, "transfer timed out!\n");
+		return -ETIMEDOUT;
+	}
+
+	return t1->len + (t2 ? t2->len : 0);
+}
+
+static int bcm63xx_hsspi_setup(struct spi_device *spi)
+{
+	u32 reg;
+
+	if (spi->bits_per_word != 8)
+		return -EINVAL;
+
+	if (spi->max_speed_hz == 0)
+		return -EINVAL;
+
+	reg = bcm_hsspi_readl(HSSPI_PROFILE_SIGNAL_CTRL_REG(spi->chip_select));
+	reg &= ~(SIGNAL_CTRL_LAUNCH_RISING | SIGNAL_CTRL_LATCH_RISING);
+	if (spi->mode & SPI_CPHA)
+		reg |= SIGNAL_CTRL_LAUNCH_RISING;
+	else
+		reg |= SIGNAL_CTRL_LATCH_RISING;
+	bcm_hsspi_writel(reg, HSSPI_PROFILE_SIGNAL_CTRL_REG(spi->chip_select));
+
+	return 0;
+}
+
+static int bcm63xx_hsspi_transfer_one(struct spi_master *master,
+				      struct spi_message *msg)
+{
+	struct spi_transfer *t, *prev = NULL;
+	struct spi_device *spi = msg->spi;
+	u32 reg;
+	int ret = -EINVAL;
+	int len = 0;
+
+	/* check if we are able to make these transfers */
+	list_for_each_entry(t, &msg->transfers, transfer_list) {
+		if (!t->tx_buf && !t->rx_buf)
+			goto out;
+
+		if (t->speed_hz == 0)
+			t->speed_hz = spi->max_speed_hz;
+
+		if (t->speed_hz > spi->max_speed_hz)
+			goto out;
+
+		if (t->len > HSSPI_BUFFER_LEN)
+			goto out;
+
+		/*
+		 * This controller does not support keeping the chip select
+		 * active between transfers.
+		 * This logic currently supports combining:
+		 *  write then read with no cs_change (e.g. m25p80 RDSR)
+		 *  write then write with no cs_change (e.g. m25p80 PP)
+		 */
+		if (prev && prev->tx_buf && !prev->cs_change && !t->cs_change) {
+			/*
+			 * reject if we have to combine two tx transfers and
+			 * their combined length is bigger than the buffer
+			 */
+			if (prev->tx_buf && t->tx_buf &&
+			    (prev->len + t->len) > HSSPI_BUFFER_LEN)
+				goto out;
+			/*
+			 * reject if we need write more than 15 bytes in read
+			 * then write.
+			 */
+			if (prev->tx_buf && t->rx_buf &&
+			    prev->len > HSSPI_MAX_PREPEND_LEN)
+				goto out;
+		}
+
+	}
+
+	/* setup clock polarity */
+	reg = bcm_hsspi_readl(HSSPI_GLOBAL_CTRL_REG);
+	reg &= ~GLOBAL_CTRL_CLK_POLARITY;
+	if (spi->mode & SPI_CPOL)
+		reg |= GLOBAL_CTRL_CLK_POLARITY;
+	bcm_hsspi_writel(reg, HSSPI_GLOBAL_CTRL_REG);
+
+	list_for_each_entry(t, &msg->transfers, transfer_list) {
+		if (prev && prev->tx_buf && !prev->cs_change && !t->cs_change) {
+			/* combine write with following transfer */
+			ret = bcm63xx_hsspi_do_txrx(msg->spi, prev, t);
+			if (ret < 0)
+				goto out;
+
+			len += ret;
+			prev = NULL;
+			continue;
+		}
+
+		/* write the previous pending transfer */
+		if (prev != NULL) {
+			ret = bcm63xx_hsspi_do_txrx(msg->spi, prev, NULL);
+			if (ret < 0)
+				goto out;
+
+			len += ret;
+		}
+
+		prev = t;
+	}
+
+	/* do last pending transfer */
+	if (prev != NULL) {
+		ret = bcm63xx_hsspi_do_txrx(msg->spi, prev, NULL);
+		if (ret < 0)
+			goto out;
+		len += ret;
+	}
+
+	msg->actual_length = len;
+	ret = 0;
+out:
+	msg->status = ret;
+	spi_finalize_current_message(master);
+	return 0;
+}
+
+static irqreturn_t bcm63xx_hsspi_interrupt(int irq, void *dev_id)
+{
+	struct spi_master *master = (struct spi_master *)dev_id;
+	struct bcm63xx_hsspi *bs = spi_master_get_devdata(master);
+
+	if (bcm_hsspi_readl(HSSPI_INT_STATUS_MASKED_REG) == 0)
+		return IRQ_NONE;
+
+	bcm_hsspi_writel(HSSPI_INT_CLEAR_ALL, HSSPI_INT_STATUS_REG);
+	bcm_hsspi_writel(0, HSSPI_INT_MASK_REG);
+
+	if (bs->curr_trans && bs->curr_trans->rx_buf)
+		memcpy_fromio(bs->curr_trans->rx_buf,  bs->fifo,
+			      bs->curr_trans->len);
+	complete(&bs->done);
+
+	return IRQ_HANDLED;
+}
+
+static int __devinit bcm63xx_hsspi_probe(struct platform_device *pdev)
+{
+
+	struct spi_master *master;
+	struct bcm63xx_hsspi *bs;
+	struct resource *res_mem;
+	void __iomem *regs;
+	struct device *dev = &pdev->dev;
+	struct bcm63xx_hsspi_pdata *pdata = pdev->dev.platform_data;
+	struct clk *clk;
+	int irq;
+	int ret;
+
+	irq = platform_get_irq(pdev, 0);
+	if (irq < 0) {
+		dev_err(dev, "no irq\n");
+		return -ENXIO;
+	}
+
+	res_mem = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	regs = devm_request_and_ioremap(dev, res_mem);
+	if (!regs) {
+		dev_err(dev, "unable to ioremap regs\n");
+		return -ENXIO;
+	}
+
+	clk = clk_get(dev, "hsspi");
+
+	if (IS_ERR(clk)) {
+		ret = PTR_ERR(clk);
+		goto out_release;
+	}
+
+	clk_prepare_enable(clk);
+
+	master = spi_alloc_master(&pdev->dev, sizeof(*bs));
+	if (!master) {
+		ret = -ENOMEM;
+		goto out_disable_clk;
+	}
+
+	bs = spi_master_get_devdata(master);
+	bs->pdev = pdev;
+	bs->clk = clk;
+	bs->regs = regs;
+
+	master->bus_num = pdata->bus_num;
+	master->num_chipselect = 8;
+	master->setup = bcm63xx_hsspi_setup;
+	master->transfer_one_message = bcm63xx_hsspi_transfer_one;
+	master->mode_bits = SPI_CPOL | SPI_CPHA;
+
+	bs->speed_hz = pdata->speed_hz;
+	bs->fifo = (u8 __iomem *)(bs->regs + HSSPI_FIFO_REG(0));
+
+	platform_set_drvdata(pdev, master);
+
+	bs->curr_trans = NULL;
+
+	/* Initialize the hardware */
+	bcm_hsspi_writel(0, HSSPI_INT_MASK_REG);
+
+	/* clean up any pending interrupts */
+	bcm_hsspi_writel(HSSPI_INT_CLEAR_ALL, HSSPI_INT_STATUS_REG);
+
+	bcm_hsspi_writel(bcm_hsspi_readl(HSSPI_GLOBAL_CTRL_REG) |
+			 GLOBAL_CTRL_CLK_GATE_SSOFF,
+			 HSSPI_GLOBAL_CTRL_REG);
+
+	ret = devm_request_irq(dev, irq, bcm63xx_hsspi_interrupt, IRQF_SHARED,
+			       pdev->name, master);
+
+	if (ret)
+		goto out_put_master;
+
+	/* register and we are done */
+	ret = spi_register_master(master);
+	if (ret)
+		goto out_free_irq;
+
+	return 0;
+
+out_free_irq:
+	devm_free_irq(dev, bs->irq, master);
+out_put_master:
+	spi_master_put(master);
+out_disable_clk:
+	clk_disable_unprepare(clk);
+	clk_put(clk);
+out_release:
+	devm_ioremap_release(dev, regs);
+
+	return ret;
+}
+
+
+static int __exit bcm63xx_hsspi_remove(struct platform_device *pdev)
+{
+	struct spi_master *master = platform_get_drvdata(pdev);
+	struct bcm63xx_hsspi *bs = spi_master_get_devdata(master);
+
+	spi_unregister_master(master);
+
+	/* reset the hardware and block queue progress */
+	bcm_hsspi_writel(0, HSSPI_INT_MASK_REG);
+	clk_disable_unprepare(bs->clk);
+	clk_put(bs->clk);
+
+	return 0;
+}
+
+#ifdef CONFIG_PM
+static int bcm63xx_hsspi_suspend(struct platform_device *pdev,
+				 pm_message_t mesg)
+{
+	struct spi_master *master = platform_get_drvdata(pdev);
+	struct bcm63xx_hsspi *bs = spi_master_get_devdata(master);
+
+	spi_master_suspend(master);
+	clk_disable(bs->clk);
+
+	return 0;
+}
+
+static int bcm63xx_hsspi_resume(struct platform_device *pdev)
+{
+	struct spi_master *master = platform_get_drvdata(pdev);
+	struct bcm63xx_hsspi *bs = spi_master_get_devdata(master);
+
+	clk_enable(bs->clk);
+	spi_master_resume(master);
+
+	return 0;
+}
+
+static const struct dev_pm_ops bcm63xx_hsspi_pm_ops = {
+	.suspend	= bcm63xx_hsspi_suspend,
+	.resume		= bcm63xx_hsspi_resume,
+};
+
+#define BCM63XX_HSSPI_PM_OPS	(&bcm63xx_hsspi_pm_ops)
+#else
+#define BCM63XX_HSSPI_PM_OPS	NULL
+#endif
+
+
+
+static struct platform_driver bcm63xx_hsspi_driver = {
+	.driver = {
+		.name	= "bcm63xx-hsspi",
+		.owner	= THIS_MODULE,
+		.pm	= BCM63XX_HSSPI_PM_OPS,
+	},
+	.probe		= bcm63xx_hsspi_probe,
+	.remove		= __exit_p(bcm63xx_hsspi_remove),
+};
+
+module_platform_driver(bcm63xx_hsspi_driver);
+
+MODULE_ALIAS("platform:bcm63xx_hsspi");
+MODULE_DESCRIPTION("Broadcom BCM63xx HS SPI Controller driver");
+MODULE_AUTHOR("Jonas Gorski <jonas.gorski@gmail.com>");
+MODULE_LICENSE("GPL");