openwrt/target/linux/ramips/dts/mt7621_zyxel_lte5398-m904.dts

// SPDX-License-Identifier: GPL-2.0-or-later

#include "mt7621.dtsi"

#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/input/input.h>
#include <dt-bindings/leds/common.h>

/ {
	compatible = "zyxel,lte5398-m904", "mediatek,mt7621-soc";
	model = "Zyxel LTE5398-M904";

	aliases {
		label-mac-device = &gmac0;
		led-boot = &led_power_green;
		led-failsafe = &led_power_green;
		led-running = &led_power_green;
		led-upgrade = &led_power_green;
	};

	keys {
		compatible = "gpio-keys";

		wps {
			label = "wps";
			gpios = <&gpio 8 GPIO_ACTIVE_LOW>;
			linux,code = <KEY_WPS_BUTTON>;
		};

		reset {
			label = "reset";
			gpios = <&gpio 6 GPIO_ACTIVE_LOW>;
			linux,code = <KEY_RESTART>;
		};
	};

	leds {
		compatible = "gpio-leds";

		led_power_green: power_green {
			function = LED_FUNCTION_POWER;
			color = <LED_COLOR_ID_GREEN>;
			gpios = <&gpio 16 GPIO_ACTIVE_HIGH>;
		};

		power_blue {
			function = LED_FUNCTION_POWER;
			color = <LED_COLOR_ID_BLUE>;
			gpios = <&gpio 22 GPIO_ACTIVE_HIGH>;
			linux,default-trigger = "usbport";
			trigger-sources = <&ehci_port2>;
		};

		internet {
			label = "green:internet";
			gpios = <&gpio 23 GPIO_ACTIVE_HIGH>;
		};

		wifi {
			label = "green:wifi";
			gpios = <&gpio 24 GPIO_ACTIVE_HIGH>;
			linux,default-trigger = "phy0tpt";
		};

		voice {
			label = "green:voice";
			gpios = <&gpio 25 GPIO_ACTIVE_HIGH>;
		};

		lte_green {
			label = "green:lte";
			gpios = <&gpio 14 GPIO_ACTIVE_HIGH>;
		};

		lte_orange {
			label = "orange:lte";
			gpios = <&gpio 13 GPIO_ACTIVE_HIGH>;
		};

		lte_red {
			label = "red:lte";
			gpios = <&gpio 15 GPIO_ACTIVE_HIGH>;
		};
	};

	gpio_export {
		compatible = "gpio-export";
		#size-cells = <0>;

		lte_power {
			gpio-export,name = "lte_power";
			gpio-export,output = <0>;
			gpios = <&gpio 27 GPIO_ACTIVE_LOW>;
		};
	};

	reg_usb_power: regulator {
		compatible = "regulator-fixed";
		reglator-name = "usb_power";
		regulator-min-microvolt = <5000000>;
		regulator-max-microvolt = <5000000>;
		gpios = <&gpio 0 GPIO_ACTIVE_HIGH>;
		enable-active-high;
		regulator-boot-on;
	};
};

&xhci {
	vbus-supply = <&reg_usb_power>;
};

&nand {
	status = "okay";

	partitions {
		compatible = "fixed-partitions";
		#address-cells = <1>;
		#size-cells = <1>;

		partition@0 {
			label = "Bootloader";
			reg = <0x0 0x80000>;
			read-only;
		};

		partition@80000 {
			label = "Config";
			reg = <0x80000 0x80000>;
		};

		partition@100000 {
			label = "Factory";
			reg = <0x100000 0x40000>;
			read-only;

			nvmem-layout {
				compatible = "fixed-layout";
				#address-cells = <1>;
				#size-cells = <1>;

				eeprom_factory_0: eeprom@0 {
					reg = <0x0 0x400>;
				};

				eeprom_factory_8000: eeprom@8000 {
					reg = <0x8000 0x4da8>;
				};

				macaddr_factory_fe6e: macaddr@fe6e {
					reg = <0xfe6e 0x6>;
				};
			};
		};

		partition@140000 {
			label = "Kernel";
			reg = <0x140000 0x1ec0000>;
		};

		partition@540000 {
			label = "ubi";
			reg = <0x540000 0x1ac0000>;
		};

		partition@2140000 {
			label = "Kernel2";
			reg = <0x2140000 0x1ec0000>;
		};

		partition@4000000 {
			label = "wwan";
			reg = <0x4000000 0x100000>;
		};

		partition@4100000 {
			label = "data";
			reg = <0x4100000 0x1000000>;
		};

		partition@5100000 {
			label = "rom-d";
			reg = <0x5100000 0x100000>;
			read-only;
		};

		partition@5200000 {
			label = "reserve";
			reg = <0x5200000 0x80000>;
		};
	};
};

&pcie {
	status = "okay";
};

&ethernet {
	pinctrl-0 = <&mdio_pins>, <&rgmii1_pins>;
};

&state_default {
	gpio {
		groups = "i2c", "rgmii2", "uart3", "jtag", "wdt";
		function = "gpio";
	};
};

&gmac0 {
	nvmem-cells = <&macaddr_factory_fe6e>;
	nvmem-cell-names = "mac-address";
};

&switch0 {
	ports {
		port@0 {
			status = "okay";
			label = "lan1";
		};
		port@2 {
			status = "okay";
			label = "lan2";
		};
	};
};

&pcie0 {
	wifi@0,0 {
		compatible = "mediatek,mt76";
		reg = <0x0000 0 0 0 0>;
		nvmem-cells = <&eeprom_factory_0>;
		nvmem-cell-names = "eeprom";
	};
};

&pcie1 {
	wifi@0,0 {
		compatible = "mediatek,mt76";
		reg = <0x0000 0 0 0 0>;
		nvmem-cells = <&eeprom_factory_8000>;
		nvmem-cell-names = "eeprom";
	};
};