openwrt/target/linux/generic/backport-4.19/450-v5.0-mtd-spinand-winbond-Add-support-for-W25N01GV.patch
Jeff Kletsky b9d58f7e06 kernel: mtd: spinand: Backport chip definitions
generic: Add/rename patches for upstream consistency

ipq40xx: generic-level patch replaces same-source patches-4.19/
         082-v4.20-mtd-spinand-winbond-Add-support-for-W25N01GV.patch

The SPI-NAND framework from Linux uses common driver code that is then
"tuned" by a tiny struct of chip-specific data that describes
available commands, timing, and layout (data and OOB data). Several
manufacturers and chips have been added since 4.19, several of which
are used in devices already supported by OpenWrt (typically with no or
"legacy" access to their NAND memory). This commit catches up the
supported-chip definitions through Linux 5.2-rc6 and linux/next.

The driver is only compiled for platforms with CONFIG_MTD_SPI_NAND=y.
This presently includes ipq40xx and pistachio, with the addition of
ath79-nand in these commits (and not ath79-generic or ath79-tiny).

Upstream patches refreshed against 4.19.75

Build-tested-on: ipq40xx
Run-tested-on: ath79-nand

Signed-off-by: Jeff Kletsky <git-commits@allycomm.com>
2019-10-24 23:07:47 +02:00

38 lines
1.3 KiB
Diff

From 9a4d83074769d6ecf1f5c3fef0f183b09abf3726 Mon Sep 17 00:00:00 2001
From: Robert Marko <robimarko@gmail.com>
Date: Sat, 6 Oct 2018 17:36:42 +0200
Subject: [PATCH 1/8] mtd: spinand: winbond: Add support for W25N01GV
W25N01GV is a single die version of the already supported
W25M02GV with half the capacity. Everything else is the
same so introduce support for W25N01GV.
Datasheet:http://www.winbond.com/resource-files/w25n01gv%20revl%20050918%20unsecured.pdf
Tested on 8devices Jalapeno dev board under OpenWrt running 4.19-rc5.
Signed-off-by: Robert Marko <robimarko@gmail.com>
Reviewed-by: Boris Brezillon <boris.brezillon@bootlin.com>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
---
drivers/mtd/nand/spi/winbond.c | 8 ++++++++
1 file changed, 8 insertions(+)
--- a/drivers/mtd/nand/spi/winbond.c
+++ b/drivers/mtd/nand/spi/winbond.c
@@ -84,6 +84,14 @@ static const struct spinand_info winbond
0,
SPINAND_ECCINFO(&w25m02gv_ooblayout, NULL),
SPINAND_SELECT_TARGET(w25m02gv_select_target)),
+ SPINAND_INFO("W25N01GV", 0xAA,
+ NAND_MEMORG(1, 2048, 64, 64, 1024, 1, 1, 1),
+ NAND_ECCREQ(1, 512),
+ SPINAND_INFO_OP_VARIANTS(&read_cache_variants,
+ &write_cache_variants,
+ &update_cache_variants),
+ 0,
+ SPINAND_ECCINFO(&w25m02gv_ooblayout, NULL)),
};
/**