openwrt/target/linux/generic/pending-4.9/810-pci_disable_common_quirks.patch
Koen Vandeputte 6f388adef8 kernel: bump 4.9 to 4.9.137
Refreshed all patches.

Removed upstreamed hunks:
- 703-phy-support-layerscape.patch

Compile-tested on: ar71xx
Runtime-tested on: ar71xx

Signed-off-by: Koen Vandeputte <koen.vandeputte@ncentric.com>
2018-11-14 16:27:43 +01:00

61 lines
2.1 KiB
Diff

From: Gabor Juhos <juhosg@openwrt.org>
Subject: debloat: add kernel config option to disabling common PCI quirks
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
---
drivers/pci/Kconfig | 6 ++++++
drivers/pci/quirks.c | 6 ++++++
2 files changed, 12 insertions(+)
--- a/drivers/pci/Kconfig
+++ b/drivers/pci/Kconfig
@@ -71,6 +71,12 @@ config XEN_PCIDEV_FRONTEND
The PCI device frontend driver allows the kernel to import arbitrary
PCI devices from a PCI backend to support PCI driver domains.
+config PCI_DISABLE_COMMON_QUIRKS
+ bool "PCI disable common quirks"
+ depends on PCI
+ help
+ If you don't know what to do here, say N.
+
config HT_IRQ
bool "Interrupts on hypertransport devices"
default y
--- a/drivers/pci/quirks.c
+++ b/drivers/pci/quirks.c
@@ -41,6 +41,7 @@ static void quirk_mmio_always_on(struct
DECLARE_PCI_FIXUP_CLASS_EARLY(PCI_ANY_ID, PCI_ANY_ID,
PCI_CLASS_BRIDGE_HOST, 8, quirk_mmio_always_on);
+#ifndef CONFIG_PCI_DISABLE_COMMON_QUIRKS
/* The Mellanox Tavor device gives false positive parity errors
* Mark this device with a broken_parity_status, to allow
* PCI scanning code to "skip" this now blacklisted device.
@@ -3038,6 +3039,7 @@ DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_I
DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, 0x65f9, quirk_intel_mc_errata);
DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, 0x65fa, quirk_intel_mc_errata);
+#endif /* !CONFIG_PCI_DISABLE_COMMON_QUIRKS */
/*
* Ivytown NTB BAR sizes are misreported by the hardware due to an erratum. To
@@ -3094,6 +3096,8 @@ static void fixup_debug_report(struct pc
}
}
+#ifndef CONFIG_PCI_DISABLE_COMMON_QUIRKS
+
/*
* Some BIOS implementations leave the Intel GPU interrupts enabled,
* even though no one is handling them (f.e. i915 driver is never loaded).
@@ -3132,6 +3136,8 @@ DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_IN
DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x010a, disable_igfx_irq);
DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x0152, disable_igfx_irq);
+#endif /* !CONFIG_PCI_DISABLE_COMMON_QUIRKS */
+
/*
* PCI devices which are on Intel chips can skip the 10ms delay
* before entering D3 mode.