openwrt/target/linux/mpc85xx/image/Makefile
Chris Blake 26cb167a5c mpc85xx: Fix Aerohive HiveAP-330 initramfs image
At some point our initramfs image grew over 6MB, which is
causing an issue when uncompressing in the stock bootloader:

=> bootm 0x5000000 - 0x1000000;
   Image Name:   Linux-4.19.24
   Created:      2019-02-23   1:58:20 UTC
   Image Type:   PowerPC Linux Kernel Image (gzip compressed)
   Data Size:    6752470 Bytes =  6.4 MB
   Load Address: 00000000
   Entry Point:  00000000
   Verifying Checksum ... OK
   Booting using the fdt blob at 0x1000000
   Uncompressing Kernel Image ... Error: inflate() returned -5
GUNZIP: uncompress, out-of-mem or overwrite error - must RESET
   board to recover
   Loading Device Tree to 00ffa000, end 00fffc78 ... OK

To get around this, we need to move to an uncompressed image
for the initramfs image. While this makes a larger image, it
is thankfully bootable so people can then convert their
devices to run OpenWRT. It's worth noting the non-initramfs
image is under 3M, so it will be ages before we have any issues
with the flashed kernel.

Signed-off-by: Chris Blake <chrisrblake93@gmail.com>
Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
[keep commit message at less than 75 characters per line]
2019-03-02 13:04:54 +01:00

134 lines
4.1 KiB
Makefile

#
# This is free software, licensed under the GNU General Public License v2.
# See /LICENSE for more information.
#
include $(TOPDIR)/rules.mk
include $(INCLUDE_DIR)/image.mk
DEVICE_VARS += TPLINK_HWID TPLINK_HWREV TPLINK_FLASHLAYOUT
define rootfs_align
$(patsubst %-256k,0x40000,$(patsubst %-128k,0x20000,$(patsubst %-64k,0x10000,$(patsubst squashfs%,0x4,$(patsubst root.%,%,$(1))))))
endef
define Build/copy-file
cat "$(1)" > "$@"
endef
# combine kernel and rootfs into one image
# mktplinkfw <type> <optional extra arguments to mktplinkfw binary>
# <type> is "sysupgrade" or "factory"
#
# -a align the rootfs start on an <align> bytes boundary
# -j add jffs2 end-of-filesystem markers
# -s strip padding from end of the image
# -X reserve <size> bytes in the firmware image (hexval prefixed with 0x)
define Build/mktplinkfw
-$(STAGING_DIR_HOST)/bin/mktplinkfw \
-H $(TPLINK_HWID) -W $(TPLINK_HWREV) -F $(TPLINK_FLASHLAYOUT) -N OpenWrt -V $(REVISION) \
-k $(IMAGE_KERNEL) \
-r $@ \
-o $@.new \
-j -X 0x40000 \
-a $(call rootfs_align,$(FILESYSTEM)) \
$(wordlist 2,$(words $(1)),$(1)) \
$(if $(findstring sysupgrade,$(word 1,$(1))),-s) && mv $@.new $@ || rm -f $@
endef
define Device/Default
PROFILES := Default
DEVICE_DTS := $(1)
KERNEL_DEPENDS = $$(wildcard $(DTS_DIR)/$$(DEVICE_DTS).dts)
KERNEL_ENTRY := 0x00000000
KERNEL_LOADADDR := 0x00000000
KERNEL := kernel-bin
endef
ifeq ($(SUBTARGET),generic)
define Device/tl-wdr4900-v1
DEVICE_TITLE := TP-Link TL-WDR4900
DEVICE_PACKAGES := kmod-ath9k wpad-basic
TPLINK_HWID := 0x49000001
TPLINK_HWREV := 1
TPLINK_FLASHLAYOUT := 16Mppc
KERNEL_NAME := cuImage.tl-wdr4900-v1
KERNEL_INITRAMFS :=
SUPPORTED_DEVICES:=tl-wdr4900-v1 tplink,tl-wdr4900-v1
IMAGES := fdt.bin factory.bin sysupgrade.bin
IMAGE/fdt.bin := append-dtb
IMAGE/sysupgrade.bin := append-rootfs | mktplinkfw sysupgrade | append-metadata
IMAGE/factory.bin := append-rootfs | mktplinkfw factory
endef
TARGET_DEVICES += tl-wdr4900-v1
define Device/red-15w-rev1
DEVICE_TITLE := Sophos RED 15w Rev.1
DEVICE_PACKAGES := kmod-usb2
# Original firmware uses a dedicated DTB-partition.
# The bootloader however supports FIT-images.
KERNEL = kernel-bin | gzip | fit gzip $(KDIR)/image-$$(DEVICE_DTS).dtb
SUPPORTED_DEVICES := sophos,red-15w-rev1
IMAGES := sysupgrade.bin
IMAGE/sysupgrade.bin := sysupgrade-tar | append-metadata
endef
TARGET_DEVICES += red-15w-rev1
endif
ifeq ($(SUBTARGET),p1020)
define Device/hiveap-330
DEVICE_TITLE := Aerohive HiveAP-330
DEVICE_PACKAGES := kmod-ath9k wpad-basic kmod-tpm-i2c-atmel
BLOCKSIZE := 128k
KERNEL_NAME := zImage
KERNEL_SIZE := 8m
KERNEL_INITRAMFS := copy-file $(KDIR)/vmlinux-initramfs | uImage none
SUPPORTED_DEVICES := aerohive,hiveap-330
IMAGES := fdt.bin sysupgrade.bin
IMAGE/fdt.bin := append-dtb
IMAGE/sysupgrade.bin := append-dtb | pad-to 256k | check-size 256k | \
append-uImage-fakehdr ramdisk | pad-to 256k | check-size 512k | \
append-rootfs | pad-rootfs $$(BLOCKSIZE) | pad-to 41216k | check-size 41216k | \
append-kernel | append-metadata
endef
TARGET_DEVICES += hiveap-330
define Device/panda
DEVICE_TITLE := OCEDO Panda
DEVICE_PACKAGES := kmod-rtc-ds1307 kmod-usb2 uboot-envtools
KERNEL = kernel-bin | gzip | fit gzip $(KDIR)/image-$$(DEVICE_DTS).dtb
PAGESIZE := 2048
SUBPAGESIZE := 512
BLOCKSIZE := 128k
SUPPORTED_DEVICES := ocedo,panda
IMAGES := fdt.bin sysupgrade.bin
IMAGE/sysupgrade.bin := sysupgrade-tar | append-metadata
IMAGE/fdt.bin := append-dtb
endef
TARGET_DEVICES += panda
endif
ifeq ($(SUBTARGET),p2020)
define Device/p2020rdb
DEVICE_TITLE := Freescale P2020RDB
DEVICE_DTS_DIR := $(DTS_DIR)/fsl
DEVICE_PACKAGES := kmod-hwmon-core kmod-hwmon-lm90 kmod-rtc-ds1307 \
kmod-gpio-pca953x kmod-eeprom-at24
BLOCKSIZE := 128k
KERNEL := kernel-bin | gzip | \
fit gzip $$(KDIR)/image-$$(firstword $$(DEVICE_DTS)).dtb
SUPPORTED_DEVICES := fsl,P2020RDB
IMAGES := sysupgrade.bin
IMAGE/sysupgrade.bin := append-kernel | append-rootfs | \
pad-rootfs $$(BLOCKSIZE) | append-metadata
endef
TARGET_DEVICES += p2020rdb
endif
$(eval $(call BuildImage))