mirror of
https://github.com/openwrt/openwrt.git
synced 2024-12-22 23:12:32 +00:00
62b7f5931c
bcm2708: boot tested on RPi B+ v1.2
bcm2709: boot tested on RPi 3B v1.2 and RPi 4B v1.1 4G
bcm2710: boot tested on RPi 3B v1.2
bcm2711: boot tested on RPi 4B v1.1 4G
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
(cherry-picked from commit f07e572f64)
260 lines
7.8 KiB
Diff
260 lines
7.8 KiB
Diff
From 97a48106d1698038720495fdd49c491b283bf110 Mon Sep 17 00:00:00 2001
|
|
From: Nicolas Saenz Julienne <nsaenzjulienne@suse.de>
|
|
Date: Thu, 7 Nov 2019 16:06:45 +0100
|
|
Subject: [PATCH] x86/PCI: sta2x11: use default DMA address translation
|
|
|
|
commit e380a0394c36a3a878c858418d5dd7f5f195b6fc upstream.
|
|
|
|
The devices found behind this PCIe chip have unusual DMA mapping
|
|
constraints as there is an AMBA interconnect placed in between them and
|
|
the different PCI endpoints. The offset between physical memory
|
|
addresses and AMBA's view is provided by reading a PCI config register,
|
|
which is saved and used whenever DMA mapping is needed.
|
|
|
|
It turns out that this DMA setup can be represented by properly setting
|
|
'dma_pfn_offset', 'dma_bus_mask' and 'dma_mask' during the PCI device
|
|
enable fixup. And ultimately allows us to get rid of this device's
|
|
custom DMA functions.
|
|
|
|
Aside from the code deletion and DMA setup, sta2x11_pdev_to_mapping() is
|
|
moved to avoid warnings whenever CONFIG_PM is not enabled.
|
|
|
|
Signed-off-by: Nicolas Saenz Julienne <nsaenzjulienne@suse.de>
|
|
Signed-off-by: Christoph Hellwig <hch@lst.de>
|
|
---
|
|
arch/x86/Kconfig | 1 -
|
|
arch/x86/include/asm/device.h | 3 -
|
|
arch/x86/include/asm/dma-direct.h | 9 --
|
|
arch/x86/pci/sta2x11-fixup.c | 135 ++++++------------------------
|
|
4 files changed, 26 insertions(+), 122 deletions(-)
|
|
delete mode 100644 arch/x86/include/asm/dma-direct.h
|
|
|
|
--- a/arch/x86/Kconfig
|
|
+++ b/arch/x86/Kconfig
|
|
@@ -708,7 +708,6 @@ config X86_SUPPORTS_MEMORY_FAILURE
|
|
config STA2X11
|
|
bool "STA2X11 Companion Chip Support"
|
|
depends on X86_32_NON_STANDARD && PCI
|
|
- select ARCH_HAS_PHYS_TO_DMA
|
|
select SWIOTLB
|
|
select MFD_STA2X11
|
|
select GPIOLIB
|
|
--- a/arch/x86/include/asm/device.h
|
|
+++ b/arch/x86/include/asm/device.h
|
|
@@ -6,9 +6,6 @@ struct dev_archdata {
|
|
#if defined(CONFIG_INTEL_IOMMU) || defined(CONFIG_AMD_IOMMU)
|
|
void *iommu; /* hook for IOMMU specific extension */
|
|
#endif
|
|
-#ifdef CONFIG_STA2X11
|
|
- bool is_sta2x11;
|
|
-#endif
|
|
};
|
|
|
|
#if defined(CONFIG_X86_DEV_DMA_OPS) && defined(CONFIG_PCI_DOMAINS)
|
|
--- a/arch/x86/include/asm/dma-direct.h
|
|
+++ /dev/null
|
|
@@ -1,9 +0,0 @@
|
|
-/* SPDX-License-Identifier: GPL-2.0 */
|
|
-#ifndef ASM_X86_DMA_DIRECT_H
|
|
-#define ASM_X86_DMA_DIRECT_H 1
|
|
-
|
|
-bool dma_capable(struct device *dev, dma_addr_t addr, size_t size);
|
|
-dma_addr_t __phys_to_dma(struct device *dev, phys_addr_t paddr);
|
|
-phys_addr_t __dma_to_phys(struct device *dev, dma_addr_t daddr);
|
|
-
|
|
-#endif /* ASM_X86_DMA_DIRECT_H */
|
|
--- a/arch/x86/pci/sta2x11-fixup.c
|
|
+++ b/arch/x86/pci/sta2x11-fixup.c
|
|
@@ -30,7 +30,6 @@ struct sta2x11_ahb_regs { /* saved durin
|
|
};
|
|
|
|
struct sta2x11_mapping {
|
|
- u32 amba_base;
|
|
int is_suspended;
|
|
struct sta2x11_ahb_regs regs[STA2X11_NR_FUNCS];
|
|
};
|
|
@@ -92,18 +91,6 @@ static int sta2x11_pdev_to_ep(struct pci
|
|
return pdev->bus->number - instance->bus0;
|
|
}
|
|
|
|
-static struct sta2x11_mapping *sta2x11_pdev_to_mapping(struct pci_dev *pdev)
|
|
-{
|
|
- struct sta2x11_instance *instance;
|
|
- int ep;
|
|
-
|
|
- instance = sta2x11_pdev_to_instance(pdev);
|
|
- if (!instance)
|
|
- return NULL;
|
|
- ep = sta2x11_pdev_to_ep(pdev);
|
|
- return instance->map + ep;
|
|
-}
|
|
-
|
|
/* This is exported, as some devices need to access the MFD registers */
|
|
struct sta2x11_instance *sta2x11_get_instance(struct pci_dev *pdev)
|
|
{
|
|
@@ -111,39 +98,6 @@ struct sta2x11_instance *sta2x11_get_ins
|
|
}
|
|
EXPORT_SYMBOL(sta2x11_get_instance);
|
|
|
|
-
|
|
-/**
|
|
- * p2a - Translate physical address to STA2x11 AMBA address,
|
|
- * used for DMA transfers to STA2x11
|
|
- * @p: Physical address
|
|
- * @pdev: PCI device (must be hosted within the connext)
|
|
- */
|
|
-static dma_addr_t p2a(dma_addr_t p, struct pci_dev *pdev)
|
|
-{
|
|
- struct sta2x11_mapping *map;
|
|
- dma_addr_t a;
|
|
-
|
|
- map = sta2x11_pdev_to_mapping(pdev);
|
|
- a = p + map->amba_base;
|
|
- return a;
|
|
-}
|
|
-
|
|
-/**
|
|
- * a2p - Translate STA2x11 AMBA address to physical address
|
|
- * used for DMA transfers from STA2x11
|
|
- * @a: STA2x11 AMBA address
|
|
- * @pdev: PCI device (must be hosted within the connext)
|
|
- */
|
|
-static dma_addr_t a2p(dma_addr_t a, struct pci_dev *pdev)
|
|
-{
|
|
- struct sta2x11_mapping *map;
|
|
- dma_addr_t p;
|
|
-
|
|
- map = sta2x11_pdev_to_mapping(pdev);
|
|
- p = a - map->amba_base;
|
|
- return p;
|
|
-}
|
|
-
|
|
/* At setup time, we use our own ops if the device is a ConneXt one */
|
|
static void sta2x11_setup_pdev(struct pci_dev *pdev)
|
|
{
|
|
@@ -151,9 +105,6 @@ static void sta2x11_setup_pdev(struct pc
|
|
|
|
if (!instance) /* either a sta2x11 bridge or another ST device */
|
|
return;
|
|
- pci_set_consistent_dma_mask(pdev, STA2X11_AMBA_SIZE - 1);
|
|
- pci_set_dma_mask(pdev, STA2X11_AMBA_SIZE - 1);
|
|
- pdev->dev.archdata.is_sta2x11 = true;
|
|
|
|
/* We must enable all devices as master, for audio DMA to work */
|
|
pci_set_master(pdev);
|
|
@@ -161,61 +112,6 @@ static void sta2x11_setup_pdev(struct pc
|
|
DECLARE_PCI_FIXUP_ENABLE(PCI_VENDOR_ID_STMICRO, PCI_ANY_ID, sta2x11_setup_pdev);
|
|
|
|
/*
|
|
- * The following three functions are exported (used in swiotlb: FIXME)
|
|
- */
|
|
-/**
|
|
- * dma_capable - Check if device can manage DMA transfers (FIXME: kill it)
|
|
- * @dev: device for a PCI device
|
|
- * @addr: DMA address
|
|
- * @size: DMA size
|
|
- */
|
|
-bool dma_capable(struct device *dev, dma_addr_t addr, size_t size)
|
|
-{
|
|
- struct sta2x11_mapping *map;
|
|
-
|
|
- if (!dev->archdata.is_sta2x11) {
|
|
- if (!dev->dma_mask)
|
|
- return false;
|
|
- return addr + size - 1 <= *dev->dma_mask;
|
|
- }
|
|
-
|
|
- map = sta2x11_pdev_to_mapping(to_pci_dev(dev));
|
|
-
|
|
- if (!map || (addr < map->amba_base))
|
|
- return false;
|
|
- if (addr + size >= map->amba_base + STA2X11_AMBA_SIZE) {
|
|
- return false;
|
|
- }
|
|
-
|
|
- return true;
|
|
-}
|
|
-
|
|
-/**
|
|
- * __phys_to_dma - Return the DMA AMBA address used for this STA2x11 device
|
|
- * @dev: device for a PCI device
|
|
- * @paddr: Physical address
|
|
- */
|
|
-dma_addr_t __phys_to_dma(struct device *dev, phys_addr_t paddr)
|
|
-{
|
|
- if (!dev->archdata.is_sta2x11)
|
|
- return paddr;
|
|
- return p2a(paddr, to_pci_dev(dev));
|
|
-}
|
|
-
|
|
-/**
|
|
- * dma_to_phys - Return the physical address used for this STA2x11 DMA address
|
|
- * @dev: device for a PCI device
|
|
- * @daddr: STA2x11 AMBA DMA address
|
|
- */
|
|
-phys_addr_t __dma_to_phys(struct device *dev, dma_addr_t daddr)
|
|
-{
|
|
- if (!dev->archdata.is_sta2x11)
|
|
- return daddr;
|
|
- return a2p(daddr, to_pci_dev(dev));
|
|
-}
|
|
-
|
|
-
|
|
-/*
|
|
* At boot we must set up the mappings for the pcie-to-amba bridge.
|
|
* It involves device access, and the same happens at suspend/resume time
|
|
*/
|
|
@@ -234,12 +130,22 @@ phys_addr_t __dma_to_phys(struct device
|
|
/* At probe time, enable mapping for each endpoint, using the pdev */
|
|
static void sta2x11_map_ep(struct pci_dev *pdev)
|
|
{
|
|
- struct sta2x11_mapping *map = sta2x11_pdev_to_mapping(pdev);
|
|
+ struct sta2x11_instance *instance = sta2x11_pdev_to_instance(pdev);
|
|
+ struct device *dev = &pdev->dev;
|
|
+ u32 amba_base, max_amba_addr;
|
|
int i;
|
|
|
|
- if (!map)
|
|
+ if (!instance)
|
|
return;
|
|
- pci_read_config_dword(pdev, AHB_BASE(0), &map->amba_base);
|
|
+
|
|
+ pci_read_config_dword(pdev, AHB_BASE(0), &amba_base);
|
|
+ max_amba_addr = amba_base + STA2X11_AMBA_SIZE - 1;
|
|
+
|
|
+ dev->dma_pfn_offset = PFN_DOWN(-amba_base);
|
|
+
|
|
+ dev->bus_dma_mask = max_amba_addr;
|
|
+ pci_set_consistent_dma_mask(pdev, max_amba_addr);
|
|
+ pci_set_dma_mask(pdev, max_amba_addr);
|
|
|
|
/* Configure AHB mapping */
|
|
pci_write_config_dword(pdev, AHB_PEXLBASE(0), 0);
|
|
@@ -253,13 +159,24 @@ static void sta2x11_map_ep(struct pci_de
|
|
|
|
dev_info(&pdev->dev,
|
|
"sta2x11: Map EP %i: AMBA address %#8x-%#8x\n",
|
|
- sta2x11_pdev_to_ep(pdev), map->amba_base,
|
|
- map->amba_base + STA2X11_AMBA_SIZE - 1);
|
|
+ sta2x11_pdev_to_ep(pdev), amba_base, max_amba_addr);
|
|
}
|
|
DECLARE_PCI_FIXUP_ENABLE(PCI_VENDOR_ID_STMICRO, PCI_ANY_ID, sta2x11_map_ep);
|
|
|
|
#ifdef CONFIG_PM /* Some register values must be saved and restored */
|
|
|
|
+static struct sta2x11_mapping *sta2x11_pdev_to_mapping(struct pci_dev *pdev)
|
|
+{
|
|
+ struct sta2x11_instance *instance;
|
|
+ int ep;
|
|
+
|
|
+ instance = sta2x11_pdev_to_instance(pdev);
|
|
+ if (!instance)
|
|
+ return NULL;
|
|
+ ep = sta2x11_pdev_to_ep(pdev);
|
|
+ return instance->map + ep;
|
|
+}
|
|
+
|
|
static void suspend_mapping(struct pci_dev *pdev)
|
|
{
|
|
struct sta2x11_mapping *map = sta2x11_pdev_to_mapping(pdev);
|