mirror of
https://github.com/openwrt/openwrt.git
synced 2024-12-25 00:11:13 +00:00
c98ddf0f01
1. Add support for Marvell CN9130 SoC 2. Add support for CP115,and create an armada-cp11x.dtsi file which will be used to instantiate both CP110 and CP115 3. Add support for AP807/AP807-quad,AP807 is a major component of CN9130 SoC series 4. Drop PCIe I/O ranges from CP11x file and externalize PCIe macros from CP11x file Signed-off-by: Ian Chang <ianchang@ieiworld.com>
938 lines
22 KiB
Diff
938 lines
22 KiB
Diff
From 7409b155562cc19b929b57692b334c5758ffc75d Mon Sep 17 00:00:00 2001
|
|
From: Konstantin Porotchkin <kostap@marvell.com>
|
|
Date: Fri, 4 Oct 2019 16:27:22 +0200
|
|
Subject: [PATCH] arm64: dts: marvell: Prepare the introduction of AP807 based
|
|
SoCs
|
|
|
|
Prepare the support for Marvell AP807 die. This die is very similar to
|
|
AP806 but uses different DDR PHY. AP807 is a major component of CN9130
|
|
SoC series.
|
|
|
|
Signed-off-by: Konstantin Porotchkin <kostap@marvell.com>
|
|
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
|
|
Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com>
|
|
---
|
|
arch/arm64/boot/dts/marvell/armada-ap806.dtsi | 448 +----------------
|
|
arch/arm64/boot/dts/marvell/armada-ap80x.dtsi | 456 ++++++++++++++++++
|
|
2 files changed, 458 insertions(+), 446 deletions(-)
|
|
create mode 100644 arch/arm64/boot/dts/marvell/armada-ap80x.dtsi
|
|
|
|
--- a/arch/arm64/boot/dts/marvell/armada-ap806.dtsi
|
|
+++ b/arch/arm64/boot/dts/marvell/armada-ap806.dtsi
|
|
@@ -5,454 +5,10 @@
|
|
* Device Tree file for Marvell Armada AP806.
|
|
*/
|
|
|
|
-#include <dt-bindings/interrupt-controller/arm-gic.h>
|
|
-#include <dt-bindings/thermal/thermal.h>
|
|
-
|
|
-/dts-v1/;
|
|
+#define AP_NAME ap806
|
|
+#include "armada-ap80x.dtsi"
|
|
|
|
/ {
|
|
model = "Marvell Armada AP806";
|
|
compatible = "marvell,armada-ap806";
|
|
- #address-cells = <2>;
|
|
- #size-cells = <2>;
|
|
-
|
|
- aliases {
|
|
- serial0 = &uart0;
|
|
- serial1 = &uart1;
|
|
- gpio0 = &ap_gpio;
|
|
- spi0 = &spi0;
|
|
- };
|
|
-
|
|
- psci {
|
|
- compatible = "arm,psci-0.2";
|
|
- method = "smc";
|
|
- };
|
|
-
|
|
- reserved-memory {
|
|
- #address-cells = <2>;
|
|
- #size-cells = <2>;
|
|
- ranges;
|
|
-
|
|
- /*
|
|
- * This area matches the mapping done with a
|
|
- * mainline U-Boot, and should be updated by the
|
|
- * bootloader.
|
|
- */
|
|
-
|
|
- psci-area@4000000 {
|
|
- reg = <0x0 0x4000000 0x0 0x200000>;
|
|
- no-map;
|
|
- };
|
|
- };
|
|
-
|
|
- ap806 {
|
|
- #address-cells = <2>;
|
|
- #size-cells = <2>;
|
|
- compatible = "simple-bus";
|
|
- interrupt-parent = <&gic>;
|
|
- ranges;
|
|
-
|
|
- config-space@f0000000 {
|
|
- #address-cells = <1>;
|
|
- #size-cells = <1>;
|
|
- compatible = "simple-bus";
|
|
- ranges = <0x0 0x0 0xf0000000 0x1000000>;
|
|
-
|
|
- gic: interrupt-controller@210000 {
|
|
- compatible = "arm,gic-400";
|
|
- #interrupt-cells = <3>;
|
|
- #address-cells = <1>;
|
|
- #size-cells = <1>;
|
|
- ranges;
|
|
- interrupt-controller;
|
|
- interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>;
|
|
- reg = <0x210000 0x10000>,
|
|
- <0x220000 0x20000>,
|
|
- <0x240000 0x20000>,
|
|
- <0x260000 0x20000>;
|
|
-
|
|
- gic_v2m0: v2m@280000 {
|
|
- compatible = "arm,gic-v2m-frame";
|
|
- msi-controller;
|
|
- reg = <0x280000 0x1000>;
|
|
- arm,msi-base-spi = <160>;
|
|
- arm,msi-num-spis = <32>;
|
|
- };
|
|
- gic_v2m1: v2m@290000 {
|
|
- compatible = "arm,gic-v2m-frame";
|
|
- msi-controller;
|
|
- reg = <0x290000 0x1000>;
|
|
- arm,msi-base-spi = <192>;
|
|
- arm,msi-num-spis = <32>;
|
|
- };
|
|
- gic_v2m2: v2m@2a0000 {
|
|
- compatible = "arm,gic-v2m-frame";
|
|
- msi-controller;
|
|
- reg = <0x2a0000 0x1000>;
|
|
- arm,msi-base-spi = <224>;
|
|
- arm,msi-num-spis = <32>;
|
|
- };
|
|
- gic_v2m3: v2m@2b0000 {
|
|
- compatible = "arm,gic-v2m-frame";
|
|
- msi-controller;
|
|
- reg = <0x2b0000 0x1000>;
|
|
- arm,msi-base-spi = <256>;
|
|
- arm,msi-num-spis = <32>;
|
|
- };
|
|
- };
|
|
-
|
|
- timer {
|
|
- compatible = "arm,armv8-timer";
|
|
- interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
|
|
- <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
|
|
- <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
|
|
- <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>;
|
|
- };
|
|
-
|
|
- pmu {
|
|
- compatible = "arm,cortex-a72-pmu";
|
|
- interrupt-parent = <&pic>;
|
|
- interrupts = <17>;
|
|
- };
|
|
-
|
|
- odmi: odmi@300000 {
|
|
- compatible = "marvell,odmi-controller";
|
|
- interrupt-controller;
|
|
- msi-controller;
|
|
- marvell,odmi-frames = <4>;
|
|
- reg = <0x300000 0x4000>,
|
|
- <0x304000 0x4000>,
|
|
- <0x308000 0x4000>,
|
|
- <0x30C000 0x4000>;
|
|
- marvell,spi-base = <128>, <136>, <144>, <152>;
|
|
- };
|
|
-
|
|
- gicp: gicp@3f0040 {
|
|
- compatible = "marvell,ap806-gicp";
|
|
- reg = <0x3f0040 0x10>;
|
|
- marvell,spi-ranges = <64 64>, <288 64>;
|
|
- msi-controller;
|
|
- };
|
|
-
|
|
- pic: interrupt-controller@3f0100 {
|
|
- compatible = "marvell,armada-8k-pic";
|
|
- reg = <0x3f0100 0x10>;
|
|
- #interrupt-cells = <1>;
|
|
- interrupt-controller;
|
|
- interrupts = <GIC_PPI 15 IRQ_TYPE_LEVEL_HIGH>;
|
|
- };
|
|
-
|
|
- sei: interrupt-controller@3f0200 {
|
|
- compatible = "marvell,ap806-sei";
|
|
- reg = <0x3f0200 0x40>;
|
|
- interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>;
|
|
- #interrupt-cells = <1>;
|
|
- interrupt-controller;
|
|
- msi-controller;
|
|
- };
|
|
-
|
|
- xor@400000 {
|
|
- compatible = "marvell,armada-7k-xor", "marvell,xor-v2";
|
|
- reg = <0x400000 0x1000>,
|
|
- <0x410000 0x1000>;
|
|
- msi-parent = <&gic_v2m0>;
|
|
- clocks = <&ap_clk 3>;
|
|
- dma-coherent;
|
|
- };
|
|
-
|
|
- xor@420000 {
|
|
- compatible = "marvell,armada-7k-xor", "marvell,xor-v2";
|
|
- reg = <0x420000 0x1000>,
|
|
- <0x430000 0x1000>;
|
|
- msi-parent = <&gic_v2m0>;
|
|
- clocks = <&ap_clk 3>;
|
|
- dma-coherent;
|
|
- };
|
|
-
|
|
- xor@440000 {
|
|
- compatible = "marvell,armada-7k-xor", "marvell,xor-v2";
|
|
- reg = <0x440000 0x1000>,
|
|
- <0x450000 0x1000>;
|
|
- msi-parent = <&gic_v2m0>;
|
|
- clocks = <&ap_clk 3>;
|
|
- dma-coherent;
|
|
- };
|
|
-
|
|
- xor@460000 {
|
|
- compatible = "marvell,armada-7k-xor", "marvell,xor-v2";
|
|
- reg = <0x460000 0x1000>,
|
|
- <0x470000 0x1000>;
|
|
- msi-parent = <&gic_v2m0>;
|
|
- clocks = <&ap_clk 3>;
|
|
- dma-coherent;
|
|
- };
|
|
-
|
|
- spi0: spi@510600 {
|
|
- compatible = "marvell,armada-380-spi";
|
|
- reg = <0x510600 0x50>;
|
|
- #address-cells = <1>;
|
|
- #size-cells = <0>;
|
|
- interrupts = <GIC_SPI 21 IRQ_TYPE_LEVEL_HIGH>;
|
|
- clocks = <&ap_clk 3>;
|
|
- status = "disabled";
|
|
- };
|
|
-
|
|
- i2c0: i2c@511000 {
|
|
- compatible = "marvell,mv78230-i2c";
|
|
- reg = <0x511000 0x20>;
|
|
- #address-cells = <1>;
|
|
- #size-cells = <0>;
|
|
- interrupts = <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>;
|
|
- timeout-ms = <1000>;
|
|
- clocks = <&ap_clk 3>;
|
|
- status = "disabled";
|
|
- };
|
|
-
|
|
- uart0: serial@512000 {
|
|
- compatible = "snps,dw-apb-uart";
|
|
- reg = <0x512000 0x100>;
|
|
- reg-shift = <2>;
|
|
- interrupts = <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>;
|
|
- reg-io-width = <1>;
|
|
- clocks = <&ap_clk 3>;
|
|
- status = "disabled";
|
|
- };
|
|
-
|
|
- uart1: serial@512100 {
|
|
- compatible = "snps,dw-apb-uart";
|
|
- reg = <0x512100 0x100>;
|
|
- reg-shift = <2>;
|
|
- interrupts = <GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>;
|
|
- reg-io-width = <1>;
|
|
- clocks = <&ap_clk 3>;
|
|
- status = "disabled";
|
|
-
|
|
- };
|
|
-
|
|
- watchdog: watchdog@610000 {
|
|
- compatible = "arm,sbsa-gwdt";
|
|
- reg = <0x610000 0x1000>, <0x600000 0x1000>;
|
|
- interrupts = <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>;
|
|
- };
|
|
-
|
|
- ap_sdhci0: sdhci@6e0000 {
|
|
- compatible = "marvell,armada-ap806-sdhci";
|
|
- reg = <0x6e0000 0x300>;
|
|
- interrupts = <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>;
|
|
- clock-names = "core";
|
|
- clocks = <&ap_clk 4>;
|
|
- dma-coherent;
|
|
- marvell,xenon-phy-slow-mode;
|
|
- status = "disabled";
|
|
- };
|
|
-
|
|
- ap_syscon0: system-controller@6f4000 {
|
|
- compatible = "syscon", "simple-mfd";
|
|
- reg = <0x6f4000 0x2000>;
|
|
-
|
|
- ap_clk: clock {
|
|
- compatible = "marvell,ap806-clock";
|
|
- #clock-cells = <1>;
|
|
- };
|
|
-
|
|
- ap_pinctrl: pinctrl {
|
|
- compatible = "marvell,ap806-pinctrl";
|
|
-
|
|
- uart0_pins: uart0-pins {
|
|
- marvell,pins = "mpp11", "mpp19";
|
|
- marvell,function = "uart0";
|
|
- };
|
|
- };
|
|
-
|
|
- ap_gpio: gpio@1040 {
|
|
- compatible = "marvell,armada-8k-gpio";
|
|
- offset = <0x1040>;
|
|
- ngpios = <20>;
|
|
- gpio-controller;
|
|
- #gpio-cells = <2>;
|
|
- gpio-ranges = <&ap_pinctrl 0 0 20>;
|
|
- };
|
|
- };
|
|
-
|
|
- ap_syscon1: system-controller@6f8000 {
|
|
- compatible = "syscon", "simple-mfd";
|
|
- reg = <0x6f8000 0x1000>;
|
|
- #address-cells = <1>;
|
|
- #size-cells = <1>;
|
|
-
|
|
- cpu_clk: clock-cpu@278 {
|
|
- compatible = "marvell,ap806-cpu-clock";
|
|
- clocks = <&ap_clk 0>, <&ap_clk 1>;
|
|
- #clock-cells = <1>;
|
|
- reg = <0x278 0xa30>;
|
|
- };
|
|
-
|
|
- ap_thermal: thermal-sensor@80 {
|
|
- compatible = "marvell,armada-ap806-thermal";
|
|
- reg = <0x80 0x10>;
|
|
- interrupt-parent = <&sei>;
|
|
- interrupts = <18>;
|
|
- #thermal-sensor-cells = <1>;
|
|
- };
|
|
- };
|
|
- };
|
|
- };
|
|
-
|
|
- /*
|
|
- * The thermal IP features one internal sensor plus, if applicable, one
|
|
- * remote channel wired to one sensor per CPU.
|
|
- *
|
|
- * Only one thermal zone per AP/CP may trigger interrupts at a time, the
|
|
- * first one that will have a critical trip point will be chosen.
|
|
- */
|
|
- thermal-zones {
|
|
- ap_thermal_ic: ap-thermal-ic {
|
|
- polling-delay-passive = <0>; /* Interrupt driven */
|
|
- polling-delay = <0>; /* Interrupt driven */
|
|
-
|
|
- thermal-sensors = <&ap_thermal 0>;
|
|
-
|
|
- trips {
|
|
- ap_crit: ap-crit {
|
|
- temperature = <100000>; /* mC degrees */
|
|
- hysteresis = <2000>; /* mC degrees */
|
|
- type = "critical";
|
|
- };
|
|
- };
|
|
-
|
|
- cooling-maps { };
|
|
- };
|
|
-
|
|
- ap_thermal_cpu0: ap-thermal-cpu0 {
|
|
- polling-delay-passive = <1000>;
|
|
- polling-delay = <1000>;
|
|
-
|
|
- thermal-sensors = <&ap_thermal 1>;
|
|
-
|
|
- trips {
|
|
- cpu0_hot: cpu0-hot {
|
|
- temperature = <85000>;
|
|
- hysteresis = <2000>;
|
|
- type = "passive";
|
|
- };
|
|
- cpu0_emerg: cpu0-emerg {
|
|
- temperature = <95000>;
|
|
- hysteresis = <2000>;
|
|
- type = "passive";
|
|
- };
|
|
- };
|
|
-
|
|
- cooling-maps {
|
|
- map0_hot: map0-hot {
|
|
- trip = <&cpu0_hot>;
|
|
- cooling-device = <&cpu0 1 2>,
|
|
- <&cpu1 1 2>;
|
|
- };
|
|
- map0_emerg: map0-ermerg {
|
|
- trip = <&cpu0_emerg>;
|
|
- cooling-device = <&cpu0 3 3>,
|
|
- <&cpu1 3 3>;
|
|
- };
|
|
- };
|
|
- };
|
|
-
|
|
- ap_thermal_cpu1: ap-thermal-cpu1 {
|
|
- polling-delay-passive = <1000>;
|
|
- polling-delay = <1000>;
|
|
-
|
|
- thermal-sensors = <&ap_thermal 2>;
|
|
-
|
|
- trips {
|
|
- cpu1_hot: cpu1-hot {
|
|
- temperature = <85000>;
|
|
- hysteresis = <2000>;
|
|
- type = "passive";
|
|
- };
|
|
- cpu1_emerg: cpu1-emerg {
|
|
- temperature = <95000>;
|
|
- hysteresis = <2000>;
|
|
- type = "passive";
|
|
- };
|
|
- };
|
|
-
|
|
- cooling-maps {
|
|
- map1_hot: map1-hot {
|
|
- trip = <&cpu1_hot>;
|
|
- cooling-device = <&cpu0 1 2>,
|
|
- <&cpu1 1 2>;
|
|
- };
|
|
- map1_emerg: map1-emerg {
|
|
- trip = <&cpu1_emerg>;
|
|
- cooling-device = <&cpu0 3 3>,
|
|
- <&cpu1 3 3>;
|
|
- };
|
|
- };
|
|
- };
|
|
-
|
|
- ap_thermal_cpu2: ap-thermal-cpu2 {
|
|
- polling-delay-passive = <1000>;
|
|
- polling-delay = <1000>;
|
|
-
|
|
- thermal-sensors = <&ap_thermal 3>;
|
|
-
|
|
- trips {
|
|
- cpu2_hot: cpu2-hot {
|
|
- temperature = <85000>;
|
|
- hysteresis = <2000>;
|
|
- type = "passive";
|
|
- };
|
|
- cpu2_emerg: cpu2-emerg {
|
|
- temperature = <95000>;
|
|
- hysteresis = <2000>;
|
|
- type = "passive";
|
|
- };
|
|
- };
|
|
-
|
|
- cooling-maps {
|
|
- map2_hot: map2-hot {
|
|
- trip = <&cpu2_hot>;
|
|
- cooling-device = <&cpu2 1 2>,
|
|
- <&cpu3 1 2>;
|
|
- };
|
|
- map2_emerg: map2-emerg {
|
|
- trip = <&cpu2_emerg>;
|
|
- cooling-device = <&cpu2 3 3>,
|
|
- <&cpu3 3 3>;
|
|
- };
|
|
- };
|
|
- };
|
|
-
|
|
- ap_thermal_cpu3: ap-thermal-cpu3 {
|
|
- polling-delay-passive = <1000>;
|
|
- polling-delay = <1000>;
|
|
-
|
|
- thermal-sensors = <&ap_thermal 4>;
|
|
-
|
|
- trips {
|
|
- cpu3_hot: cpu3-hot {
|
|
- temperature = <85000>;
|
|
- hysteresis = <2000>;
|
|
- type = "passive";
|
|
- };
|
|
- cpu3_emerg: cpu3-emerg {
|
|
- temperature = <95000>;
|
|
- hysteresis = <2000>;
|
|
- type = "passive";
|
|
- };
|
|
- };
|
|
-
|
|
- cooling-maps {
|
|
- map3_hot: map3-bhot {
|
|
- trip = <&cpu3_hot>;
|
|
- cooling-device = <&cpu2 1 2>,
|
|
- <&cpu3 1 2>;
|
|
- };
|
|
- map3_emerg: map3-emerg {
|
|
- trip = <&cpu3_emerg>;
|
|
- cooling-device = <&cpu2 3 3>,
|
|
- <&cpu3 3 3>;
|
|
- };
|
|
- };
|
|
- };
|
|
- };
|
|
};
|
|
--- /dev/null
|
|
+++ b/arch/arm64/boot/dts/marvell/armada-ap80x.dtsi
|
|
@@ -0,0 +1,456 @@
|
|
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
|
|
+/*
|
|
+ * Copyright (C) 2019 Marvell Technology Group Ltd.
|
|
+ *
|
|
+ * Device Tree file for Marvell Armada AP80x.
|
|
+ */
|
|
+
|
|
+#include <dt-bindings/interrupt-controller/arm-gic.h>
|
|
+#include <dt-bindings/thermal/thermal.h>
|
|
+
|
|
+/dts-v1/;
|
|
+
|
|
+/ {
|
|
+ #address-cells = <2>;
|
|
+ #size-cells = <2>;
|
|
+
|
|
+ aliases {
|
|
+ serial0 = &uart0;
|
|
+ serial1 = &uart1;
|
|
+ gpio0 = &ap_gpio;
|
|
+ spi0 = &spi0;
|
|
+ };
|
|
+
|
|
+ psci {
|
|
+ compatible = "arm,psci-0.2";
|
|
+ method = "smc";
|
|
+ };
|
|
+
|
|
+ reserved-memory {
|
|
+ #address-cells = <2>;
|
|
+ #size-cells = <2>;
|
|
+ ranges;
|
|
+
|
|
+ /*
|
|
+ * This area matches the mapping done with a
|
|
+ * mainline U-Boot, and should be updated by the
|
|
+ * bootloader.
|
|
+ */
|
|
+
|
|
+ psci-area@4000000 {
|
|
+ reg = <0x0 0x4000000 0x0 0x200000>;
|
|
+ no-map;
|
|
+ };
|
|
+ };
|
|
+
|
|
+ AP_NAME {
|
|
+ #address-cells = <2>;
|
|
+ #size-cells = <2>;
|
|
+ compatible = "simple-bus";
|
|
+ interrupt-parent = <&gic>;
|
|
+ ranges;
|
|
+
|
|
+ config-space@f0000000 {
|
|
+ #address-cells = <1>;
|
|
+ #size-cells = <1>;
|
|
+ compatible = "simple-bus";
|
|
+ ranges = <0x0 0x0 0xf0000000 0x1000000>;
|
|
+
|
|
+ gic: interrupt-controller@210000 {
|
|
+ compatible = "arm,gic-400";
|
|
+ #interrupt-cells = <3>;
|
|
+ #address-cells = <1>;
|
|
+ #size-cells = <1>;
|
|
+ ranges;
|
|
+ interrupt-controller;
|
|
+ interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>;
|
|
+ reg = <0x210000 0x10000>,
|
|
+ <0x220000 0x20000>,
|
|
+ <0x240000 0x20000>,
|
|
+ <0x260000 0x20000>;
|
|
+
|
|
+ gic_v2m0: v2m@280000 {
|
|
+ compatible = "arm,gic-v2m-frame";
|
|
+ msi-controller;
|
|
+ reg = <0x280000 0x1000>;
|
|
+ arm,msi-base-spi = <160>;
|
|
+ arm,msi-num-spis = <32>;
|
|
+ };
|
|
+ gic_v2m1: v2m@290000 {
|
|
+ compatible = "arm,gic-v2m-frame";
|
|
+ msi-controller;
|
|
+ reg = <0x290000 0x1000>;
|
|
+ arm,msi-base-spi = <192>;
|
|
+ arm,msi-num-spis = <32>;
|
|
+ };
|
|
+ gic_v2m2: v2m@2a0000 {
|
|
+ compatible = "arm,gic-v2m-frame";
|
|
+ msi-controller;
|
|
+ reg = <0x2a0000 0x1000>;
|
|
+ arm,msi-base-spi = <224>;
|
|
+ arm,msi-num-spis = <32>;
|
|
+ };
|
|
+ gic_v2m3: v2m@2b0000 {
|
|
+ compatible = "arm,gic-v2m-frame";
|
|
+ msi-controller;
|
|
+ reg = <0x2b0000 0x1000>;
|
|
+ arm,msi-base-spi = <256>;
|
|
+ arm,msi-num-spis = <32>;
|
|
+ };
|
|
+ };
|
|
+
|
|
+ timer {
|
|
+ compatible = "arm,armv8-timer";
|
|
+ interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
|
|
+ <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
|
|
+ <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
|
|
+ <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>;
|
|
+ };
|
|
+
|
|
+ pmu {
|
|
+ compatible = "arm,cortex-a72-pmu";
|
|
+ interrupt-parent = <&pic>;
|
|
+ interrupts = <17>;
|
|
+ };
|
|
+
|
|
+ odmi: odmi@300000 {
|
|
+ compatible = "marvell,odmi-controller";
|
|
+ interrupt-controller;
|
|
+ msi-controller;
|
|
+ marvell,odmi-frames = <4>;
|
|
+ reg = <0x300000 0x4000>,
|
|
+ <0x304000 0x4000>,
|
|
+ <0x308000 0x4000>,
|
|
+ <0x30C000 0x4000>;
|
|
+ marvell,spi-base = <128>, <136>, <144>, <152>;
|
|
+ };
|
|
+
|
|
+ gicp: gicp@3f0040 {
|
|
+ compatible = "marvell,ap806-gicp";
|
|
+ reg = <0x3f0040 0x10>;
|
|
+ marvell,spi-ranges = <64 64>, <288 64>;
|
|
+ msi-controller;
|
|
+ };
|
|
+
|
|
+ pic: interrupt-controller@3f0100 {
|
|
+ compatible = "marvell,armada-8k-pic";
|
|
+ reg = <0x3f0100 0x10>;
|
|
+ #interrupt-cells = <1>;
|
|
+ interrupt-controller;
|
|
+ interrupts = <GIC_PPI 15 IRQ_TYPE_LEVEL_HIGH>;
|
|
+ };
|
|
+
|
|
+ sei: interrupt-controller@3f0200 {
|
|
+ compatible = "marvell,ap806-sei";
|
|
+ reg = <0x3f0200 0x40>;
|
|
+ interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>;
|
|
+ #interrupt-cells = <1>;
|
|
+ interrupt-controller;
|
|
+ msi-controller;
|
|
+ };
|
|
+
|
|
+ xor@400000 {
|
|
+ compatible = "marvell,armada-7k-xor", "marvell,xor-v2";
|
|
+ reg = <0x400000 0x1000>,
|
|
+ <0x410000 0x1000>;
|
|
+ msi-parent = <&gic_v2m0>;
|
|
+ clocks = <&ap_clk 3>;
|
|
+ dma-coherent;
|
|
+ };
|
|
+
|
|
+ xor@420000 {
|
|
+ compatible = "marvell,armada-7k-xor", "marvell,xor-v2";
|
|
+ reg = <0x420000 0x1000>,
|
|
+ <0x430000 0x1000>;
|
|
+ msi-parent = <&gic_v2m0>;
|
|
+ clocks = <&ap_clk 3>;
|
|
+ dma-coherent;
|
|
+ };
|
|
+
|
|
+ xor@440000 {
|
|
+ compatible = "marvell,armada-7k-xor", "marvell,xor-v2";
|
|
+ reg = <0x440000 0x1000>,
|
|
+ <0x450000 0x1000>;
|
|
+ msi-parent = <&gic_v2m0>;
|
|
+ clocks = <&ap_clk 3>;
|
|
+ dma-coherent;
|
|
+ };
|
|
+
|
|
+ xor@460000 {
|
|
+ compatible = "marvell,armada-7k-xor", "marvell,xor-v2";
|
|
+ reg = <0x460000 0x1000>,
|
|
+ <0x470000 0x1000>;
|
|
+ msi-parent = <&gic_v2m0>;
|
|
+ clocks = <&ap_clk 3>;
|
|
+ dma-coherent;
|
|
+ };
|
|
+
|
|
+ spi0: spi@510600 {
|
|
+ compatible = "marvell,armada-380-spi";
|
|
+ reg = <0x510600 0x50>;
|
|
+ #address-cells = <1>;
|
|
+ #size-cells = <0>;
|
|
+ interrupts = <GIC_SPI 21 IRQ_TYPE_LEVEL_HIGH>;
|
|
+ clocks = <&ap_clk 3>;
|
|
+ status = "disabled";
|
|
+ };
|
|
+
|
|
+ i2c0: i2c@511000 {
|
|
+ compatible = "marvell,mv78230-i2c";
|
|
+ reg = <0x511000 0x20>;
|
|
+ #address-cells = <1>;
|
|
+ #size-cells = <0>;
|
|
+ interrupts = <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>;
|
|
+ timeout-ms = <1000>;
|
|
+ clocks = <&ap_clk 3>;
|
|
+ status = "disabled";
|
|
+ };
|
|
+
|
|
+ uart0: serial@512000 {
|
|
+ compatible = "snps,dw-apb-uart";
|
|
+ reg = <0x512000 0x100>;
|
|
+ reg-shift = <2>;
|
|
+ interrupts = <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>;
|
|
+ reg-io-width = <1>;
|
|
+ clocks = <&ap_clk 3>;
|
|
+ status = "disabled";
|
|
+ };
|
|
+
|
|
+ uart1: serial@512100 {
|
|
+ compatible = "snps,dw-apb-uart";
|
|
+ reg = <0x512100 0x100>;
|
|
+ reg-shift = <2>;
|
|
+ interrupts = <GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>;
|
|
+ reg-io-width = <1>;
|
|
+ clocks = <&ap_clk 3>;
|
|
+ status = "disabled";
|
|
+
|
|
+ };
|
|
+
|
|
+ watchdog: watchdog@610000 {
|
|
+ compatible = "arm,sbsa-gwdt";
|
|
+ reg = <0x610000 0x1000>, <0x600000 0x1000>;
|
|
+ interrupts = <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>;
|
|
+ };
|
|
+
|
|
+ ap_sdhci0: sdhci@6e0000 {
|
|
+ compatible = "marvell,armada-ap806-sdhci";
|
|
+ reg = <0x6e0000 0x300>;
|
|
+ interrupts = <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>;
|
|
+ clock-names = "core";
|
|
+ clocks = <&ap_clk 4>;
|
|
+ dma-coherent;
|
|
+ marvell,xenon-phy-slow-mode;
|
|
+ status = "disabled";
|
|
+ };
|
|
+
|
|
+ ap_syscon0: system-controller@6f4000 {
|
|
+ compatible = "syscon", "simple-mfd";
|
|
+ reg = <0x6f4000 0x2000>;
|
|
+
|
|
+ ap_clk: clock {
|
|
+ compatible = "marvell,ap806-clock";
|
|
+ #clock-cells = <1>;
|
|
+ };
|
|
+
|
|
+ ap_pinctrl: pinctrl {
|
|
+ compatible = "marvell,ap806-pinctrl";
|
|
+
|
|
+ uart0_pins: uart0-pins {
|
|
+ marvell,pins = "mpp11", "mpp19";
|
|
+ marvell,function = "uart0";
|
|
+ };
|
|
+ };
|
|
+
|
|
+ ap_gpio: gpio@1040 {
|
|
+ compatible = "marvell,armada-8k-gpio";
|
|
+ offset = <0x1040>;
|
|
+ ngpios = <20>;
|
|
+ gpio-controller;
|
|
+ #gpio-cells = <2>;
|
|
+ gpio-ranges = <&ap_pinctrl 0 0 20>;
|
|
+ };
|
|
+ };
|
|
+
|
|
+ ap_syscon1: system-controller@6f8000 {
|
|
+ compatible = "syscon", "simple-mfd";
|
|
+ reg = <0x6f8000 0x1000>;
|
|
+ #address-cells = <1>;
|
|
+ #size-cells = <1>;
|
|
+
|
|
+ cpu_clk: clock-cpu@278 {
|
|
+ compatible = "marvell,ap806-cpu-clock";
|
|
+ clocks = <&ap_clk 0>, <&ap_clk 1>;
|
|
+ #clock-cells = <1>;
|
|
+ reg = <0x278 0xa30>;
|
|
+ };
|
|
+
|
|
+ ap_thermal: thermal-sensor@80 {
|
|
+ compatible = "marvell,armada-ap806-thermal";
|
|
+ reg = <0x80 0x10>;
|
|
+ interrupt-parent = <&sei>;
|
|
+ interrupts = <18>;
|
|
+ #thermal-sensor-cells = <1>;
|
|
+ };
|
|
+ };
|
|
+ };
|
|
+ };
|
|
+
|
|
+ /*
|
|
+ * The thermal IP features one internal sensor plus, if applicable, one
|
|
+ * remote channel wired to one sensor per CPU.
|
|
+ *
|
|
+ * Only one thermal zone per AP/CP may trigger interrupts at a time, the
|
|
+ * first one that will have a critical trip point will be chosen.
|
|
+ */
|
|
+ thermal-zones {
|
|
+ ap_thermal_ic: ap-thermal-ic {
|
|
+ polling-delay-passive = <0>; /* Interrupt driven */
|
|
+ polling-delay = <0>; /* Interrupt driven */
|
|
+
|
|
+ thermal-sensors = <&ap_thermal 0>;
|
|
+
|
|
+ trips {
|
|
+ ap_crit: ap-crit {
|
|
+ temperature = <100000>; /* mC degrees */
|
|
+ hysteresis = <2000>; /* mC degrees */
|
|
+ type = "critical";
|
|
+ };
|
|
+ };
|
|
+
|
|
+ cooling-maps { };
|
|
+ };
|
|
+
|
|
+ ap_thermal_cpu0: ap-thermal-cpu0 {
|
|
+ polling-delay-passive = <1000>;
|
|
+ polling-delay = <1000>;
|
|
+
|
|
+ thermal-sensors = <&ap_thermal 1>;
|
|
+
|
|
+ trips {
|
|
+ cpu0_hot: cpu0-hot {
|
|
+ temperature = <85000>;
|
|
+ hysteresis = <2000>;
|
|
+ type = "passive";
|
|
+ };
|
|
+ cpu0_emerg: cpu0-emerg {
|
|
+ temperature = <95000>;
|
|
+ hysteresis = <2000>;
|
|
+ type = "passive";
|
|
+ };
|
|
+ };
|
|
+
|
|
+ cooling-maps {
|
|
+ map0_hot: map0-hot {
|
|
+ trip = <&cpu0_hot>;
|
|
+ cooling-device = <&cpu0 1 2>,
|
|
+ <&cpu1 1 2>;
|
|
+ };
|
|
+ map0_emerg: map0-ermerg {
|
|
+ trip = <&cpu0_emerg>;
|
|
+ cooling-device = <&cpu0 3 3>,
|
|
+ <&cpu1 3 3>;
|
|
+ };
|
|
+ };
|
|
+ };
|
|
+
|
|
+ ap_thermal_cpu1: ap-thermal-cpu1 {
|
|
+ polling-delay-passive = <1000>;
|
|
+ polling-delay = <1000>;
|
|
+
|
|
+ thermal-sensors = <&ap_thermal 2>;
|
|
+
|
|
+ trips {
|
|
+ cpu1_hot: cpu1-hot {
|
|
+ temperature = <85000>;
|
|
+ hysteresis = <2000>;
|
|
+ type = "passive";
|
|
+ };
|
|
+ cpu1_emerg: cpu1-emerg {
|
|
+ temperature = <95000>;
|
|
+ hysteresis = <2000>;
|
|
+ type = "passive";
|
|
+ };
|
|
+ };
|
|
+
|
|
+ cooling-maps {
|
|
+ map1_hot: map1-hot {
|
|
+ trip = <&cpu1_hot>;
|
|
+ cooling-device = <&cpu0 1 2>,
|
|
+ <&cpu1 1 2>;
|
|
+ };
|
|
+ map1_emerg: map1-emerg {
|
|
+ trip = <&cpu1_emerg>;
|
|
+ cooling-device = <&cpu0 3 3>,
|
|
+ <&cpu1 3 3>;
|
|
+ };
|
|
+ };
|
|
+ };
|
|
+
|
|
+ ap_thermal_cpu2: ap-thermal-cpu2 {
|
|
+ polling-delay-passive = <1000>;
|
|
+ polling-delay = <1000>;
|
|
+
|
|
+ thermal-sensors = <&ap_thermal 3>;
|
|
+
|
|
+ trips {
|
|
+ cpu2_hot: cpu2-hot {
|
|
+ temperature = <85000>;
|
|
+ hysteresis = <2000>;
|
|
+ type = "passive";
|
|
+ };
|
|
+ cpu2_emerg: cpu2-emerg {
|
|
+ temperature = <95000>;
|
|
+ hysteresis = <2000>;
|
|
+ type = "passive";
|
|
+ };
|
|
+ };
|
|
+
|
|
+ cooling-maps {
|
|
+ map2_hot: map2-hot {
|
|
+ trip = <&cpu2_hot>;
|
|
+ cooling-device = <&cpu2 1 2>,
|
|
+ <&cpu3 1 2>;
|
|
+ };
|
|
+ map2_emerg: map2-emerg {
|
|
+ trip = <&cpu2_emerg>;
|
|
+ cooling-device = <&cpu2 3 3>,
|
|
+ <&cpu3 3 3>;
|
|
+ };
|
|
+ };
|
|
+ };
|
|
+
|
|
+ ap_thermal_cpu3: ap-thermal-cpu3 {
|
|
+ polling-delay-passive = <1000>;
|
|
+ polling-delay = <1000>;
|
|
+
|
|
+ thermal-sensors = <&ap_thermal 4>;
|
|
+
|
|
+ trips {
|
|
+ cpu3_hot: cpu3-hot {
|
|
+ temperature = <85000>;
|
|
+ hysteresis = <2000>;
|
|
+ type = "passive";
|
|
+ };
|
|
+ cpu3_emerg: cpu3-emerg {
|
|
+ temperature = <95000>;
|
|
+ hysteresis = <2000>;
|
|
+ type = "passive";
|
|
+ };
|
|
+ };
|
|
+
|
|
+ cooling-maps {
|
|
+ map3_hot: map3-bhot {
|
|
+ trip = <&cpu3_hot>;
|
|
+ cooling-device = <&cpu2 1 2>,
|
|
+ <&cpu3 1 2>;
|
|
+ };
|
|
+ map3_emerg: map3-emerg {
|
|
+ trip = <&cpu3_emerg>;
|
|
+ cooling-device = <&cpu2 3 3>,
|
|
+ <&cpu3 3 3>;
|
|
+ };
|
|
+ };
|
|
+ };
|
|
+ };
|
|
+};
|