mirror of
https://github.com/openwrt/openwrt.git
synced 2024-12-23 15:32:33 +00:00
6bbca3a09a
This adds the default-state = "on"; statement for the power or primary status LED in DTS on kirkwood. This will ensure that this LED will be lit up very early in the boot process (i.e. before diag.sh is executed) and thus will provide an additional hint to the user when problems arise during early boot process. Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
63 lines
1.3 KiB
Diff
63 lines
1.3 KiB
Diff
--- a/arch/arm/boot/dts/kirkwood-dockstar.dts
|
|
+++ b/arch/arm/boot/dts/kirkwood-dockstar.dts
|
|
@@ -8,6 +8,13 @@
|
|
model = "Seagate FreeAgent Dockstar";
|
|
compatible = "seagate,dockstar", "marvell,kirkwood-88f6281", "marvell,kirkwood";
|
|
|
|
+ aliases {
|
|
+ led-boot = &led_health;
|
|
+ led-failsafe = &led_fault;
|
|
+ led-running = &led_health;
|
|
+ led-upgrade = &led_fault;
|
|
+ };
|
|
+
|
|
memory {
|
|
device_type = "memory";
|
|
reg = <0x00000000 0x8000000>;
|
|
@@ -42,12 +49,12 @@
|
|
pinctrl-0 = <&pmx_led_green &pmx_led_orange>;
|
|
pinctrl-names = "default";
|
|
|
|
- health {
|
|
+ led_health: health {
|
|
label = "status:green:health";
|
|
gpios = <&gpio1 14 GPIO_ACTIVE_LOW>;
|
|
- default-state = "keep";
|
|
+ default-state = "on";
|
|
};
|
|
- fault {
|
|
+ led_fault: fault {
|
|
label = "status:orange:fault";
|
|
gpios = <&gpio1 15 GPIO_ACTIVE_LOW>;
|
|
};
|
|
@@ -78,18 +85,22 @@
|
|
|
|
partition@0 {
|
|
label = "u-boot";
|
|
- reg = <0x0000000 0x100000>;
|
|
- read-only;
|
|
+ reg = <0x0000000 0xe0000>;
|
|
+ };
|
|
+
|
|
+ partition@e0000 {
|
|
+ label = "u-boot environment";
|
|
+ reg = <0xe0000 0x100000>;
|
|
};
|
|
|
|
partition@100000 {
|
|
- label = "uImage";
|
|
- reg = <0x0100000 0x400000>;
|
|
+ label = "second stage u-boot";
|
|
+ reg = <0x100000 0x200000>;
|
|
};
|
|
|
|
- partition@500000 {
|
|
- label = "data";
|
|
- reg = <0x0500000 0xfb00000>;
|
|
+ partition@200000 {
|
|
+ label = "ubi";
|
|
+ reg = <0x200000 0xfe00000>;
|
|
};
|
|
};
|
|
|