ExternalVendorCode/openwrt
1
0
Fork 0
mirror of https://github.com/openwrt/openwrt.git synced 2024-12-23 15:32:33 +00:00
Code Issues Actions 7 Packages Projects Releases Wiki Activity
239dff6697
openwrt/target/linux/sunxi/patches-4.9/0051-stmmac-form-4-11.patch
Stijn Tintel 239dff6697 kernel: update and refresh patches 
The lantiq patch 0028-NET-lantiq-various-etop-fixes.patch and sunxi
patch 0051-stmmac-form-4-11.patch no longer applied after applying the
the "generalize napi_complete_done()" patch.
Update them so they apply, and refresh patches while at it.

Fixes: 9aeb7ce8dc ("generic: net: generalize napi_complete_done")
Signed-off-by: Stijn Tintel <stijn@linux-ipv6.be>
2017-10-08 16:31:58 +03:00

2297 lines
76 KiB
Diff
Raw Blame History

--- a/Documentation/devicetree/bindings/net/stmmac.txt
+++ b/Documentation/devicetree/bindings/net/stmmac.txt
@@ -49,6 +49,8 @@ Optional properties:
- snps,force_sf_dma_mode Force DMA to use the Store and Forward
mode for both tx and rx. This flag is
ignored if force_thresh_dma_mode is set.
+- snps,en-tx-lpi-clockgating Enable gating of the MAC TX clock during
+ TX low-power mode
- snps,multicast-filter-bins: Number of multicast filter hash bins
supported by this device instance
- snps,perfect-filter-entries: Number of perfect filter entries supported
@@ -65,7 +67,6 @@ Optional properties:
- snps,wr_osr_lmt: max write outstanding req. limit
- snps,rd_osr_lmt: max read outstanding req. limit
- snps,kbbe: do not cross 1KiB boundary.
- - snps,axi_all: align address
- snps,blen: this is a vector of supported burst length.
- snps,fb: fixed-burst
- snps,mb: mixed-burst
--- a/drivers/net/ethernet/stmicro/stmmac/Kconfig
+++ b/drivers/net/ethernet/stmicro/stmmac/Kconfig
@@ -1,5 +1,5 @@
config STMMAC_ETH
- tristate "STMicroelectronics 10/100/1000 Ethernet driver"
+ tristate "STMicroelectronics 10/100/1000/EQOS Ethernet driver"
depends on HAS_IOMEM && HAS_DMA
select MII
select PHYLIB
@@ -7,9 +7,8 @@ config STMMAC_ETH
select PTP_1588_CLOCK
select RESET_CONTROLLER
---help---
- This is the driver for the Ethernet IPs are built around a
- Synopsys IP Core and only tested on the STMicroelectronics
- platforms.
+ This is the driver for the Ethernet IPs built around a
+ Synopsys IP Core.
if STMMAC_ETH
@@ -29,6 +28,15 @@ config STMMAC_PLATFORM
if STMMAC_PLATFORM
+config DWMAC_DWC_QOS_ETH
+ tristate "Support for snps,dwc-qos-ethernet.txt DT binding."
+ select PHYLIB
+ select CRC32
+ select MII
+ depends on OF && HAS_DMA
+ help
+ Support for chips using the snps,dwc-qos-ethernet.txt DT binding.
+
config DWMAC_GENERIC
tristate "Generic driver for DWMAC"
default STMMAC_PLATFORM
@@ -143,11 +151,11 @@ config STMMAC_PCI
tristate "STMMAC PCI bus support"
depends on STMMAC_ETH && PCI
---help---
- This is to select the Synopsys DWMAC available on PCI devices,
- if you have a controller with this interface, say Y or M here.
+ This selects the platform specific bus support for the stmmac driver.
+ This driver was tested on XLINX XC2V3000 FF1152AMT0221
+ D1215994A VIRTEX FPGA board and SNPS QoS IPK Prototyping Kit.
- This PCI support is tested on XLINX XC2V3000 FF1152AMT0221
- D1215994A VIRTEX FPGA board.
+ If you have a controller with this interface, say Y or M here.
If unsure, say N.
endif
--- a/drivers/net/ethernet/stmicro/stmmac/Makefile
+++ b/drivers/net/ethernet/stmicro/stmmac/Makefile
@@ -16,6 +16,7 @@ obj-$(CONFIG_DWMAC_SOCFPGA) += dwmac-alt
obj-$(CONFIG_DWMAC_STI) += dwmac-sti.o
obj-$(CONFIG_DWMAC_STM32) += dwmac-stm32.o
obj-$(CONFIG_DWMAC_SUNXI) += dwmac-sunxi.o
+obj-$(CONFIG_DWMAC_DWC_QOS_ETH) += dwmac-dwc-qos-eth.o
obj-$(CONFIG_DWMAC_GENERIC) += dwmac-generic.o
stmmac-platform-objs:= stmmac_platform.o
dwmac-altr-socfpga-objs := altr_tse_pcs.o dwmac-socfpga.o
--- a/drivers/net/ethernet/stmicro/stmmac/chain_mode.c
+++ b/drivers/net/ethernet/stmicro/stmmac/chain_mode.c
@@ -16,10 +16,6 @@
FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
more details.
- You should have received a copy of the GNU General Public License along with
- this program; if not, write to the Free Software Foundation, Inc.,
- 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
-
The full GNU General Public License is included in this distribution in
the file called "COPYING".
--- a/drivers/net/ethernet/stmicro/stmmac/common.h
+++ b/drivers/net/ethernet/stmicro/stmmac/common.h
@@ -12,10 +12,6 @@
FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
more details.
- You should have received a copy of the GNU General Public License along with
- this program; if not, write to the Free Software Foundation, Inc.,
- 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
-
The full GNU General Public License is included in this distribution in
the file called "COPYING".
@@ -71,7 +67,7 @@ struct stmmac_extra_stats {
unsigned long overflow_error;
unsigned long ipc_csum_error;
unsigned long rx_collision;
- unsigned long rx_crc;
+ unsigned long rx_crc_errors;
unsigned long dribbling_bit;
unsigned long rx_length;
unsigned long rx_mii;
@@ -323,6 +319,9 @@ struct dma_features {
/* TX and RX number of channels */
unsigned int number_rx_channel;
unsigned int number_tx_channel;
+ /* TX and RX number of queues */
+ unsigned int number_rx_queues;
+ unsigned int number_tx_queues;
/* Alternate (enhanced) DESC mode */
unsigned int enh_desc;
};
@@ -340,7 +339,7 @@ struct dma_features {
/* Common MAC defines */
#define MAC_CTRL_REG 0x00000000 /* MAC Control */
#define MAC_ENABLE_TX 0x00000008 /* Transmitter Enable */
-#define MAC_RNABLE_RX 0x00000004 /* Receiver Enable */
+#define MAC_ENABLE_RX 0x00000004 /* Receiver Enable */
/* Default LPI timers */
#define STMMAC_DEFAULT_LIT_LS 0x3E8
@@ -417,7 +416,7 @@ struct stmmac_dma_ops {
/* Configure the AXI Bus Mode Register */
void (*axi)(void __iomem *ioaddr, struct stmmac_axi *axi);
/* Dump DMA registers */
- void (*dump_regs) (void __iomem *ioaddr);
+ void (*dump_regs)(void __iomem *ioaddr, u32 *reg_space);
/* Set tx/rx threshold in the csr6 register
* An invalid value enables the store-and-forward mode */
void (*dma_mode)(void __iomem *ioaddr, int txmode, int rxmode,
@@ -454,8 +453,10 @@ struct stmmac_ops {
void (*core_init)(struct mac_device_info *hw, int mtu);
/* Enable and verify that the IPC module is supported */
int (*rx_ipc)(struct mac_device_info *hw);
+ /* Enable RX Queues */
+ void (*rx_queue_enable)(struct mac_device_info *hw, u32 queue);
/* Dump MAC registers */
- void (*dump_regs)(struct mac_device_info *hw);
+ void (*dump_regs)(struct mac_device_info *hw, u32 *reg_space);
/* Handle extra events on specific interrupts hw dependent */
int (*host_irq_status)(struct mac_device_info *hw,
struct stmmac_extra_stats *x);
@@ -471,7 +472,8 @@ struct stmmac_ops {
unsigned int reg_n);
void (*get_umac_addr)(struct mac_device_info *hw, unsigned char *addr,
unsigned int reg_n);
- void (*set_eee_mode)(struct mac_device_info *hw);
+ void (*set_eee_mode)(struct mac_device_info *hw,
+ bool en_tx_lpi_clockgating);
void (*reset_eee_mode)(struct mac_device_info *hw);
void (*set_eee_timer)(struct mac_device_info *hw, int ls, int tw);
void (*set_eee_pls)(struct mac_device_info *hw, int link);
--- a/drivers/net/ethernet/stmicro/stmmac/descs.h
+++ b/drivers/net/ethernet/stmicro/stmmac/descs.h
@@ -11,10 +11,6 @@
FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
more details.
- You should have received a copy of the GNU General Public License along with
- this program; if not, write to the Free Software Foundation, Inc.,
- 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
-
The full GNU General Public License is included in this distribution in
the file called "COPYING".
--- a/drivers/net/ethernet/stmicro/stmmac/descs_com.h
+++ b/drivers/net/ethernet/stmicro/stmmac/descs_com.h
@@ -17,10 +17,6 @@
FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
more details.
- You should have received a copy of the GNU General Public License along with
- this program; if not, write to the Free Software Foundation, Inc.,
- 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
-
The full GNU General Public License is included in this distribution in
the file called "COPYING".
--- /dev/null
+++ b/drivers/net/ethernet/stmicro/stmmac/dwmac-dwc-qos-eth.c
@@ -0,0 +1,202 @@
+/*
+ * Synopsys DWC Ethernet Quality-of-Service v4.10a linux driver
+ *
+ * Copyright (C) 2016 Joao Pinto <jpinto@synopsys.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program. If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#include <linux/clk.h>
+#include <linux/clk-provider.h>
+#include <linux/device.h>
+#include <linux/ethtool.h>
+#include <linux/io.h>
+#include <linux/ioport.h>
+#include <linux/module.h>
+#include <linux/of_net.h>
+#include <linux/mfd/syscon.h>
+#include <linux/platform_device.h>
+#include <linux/stmmac.h>
+
+#include "stmmac_platform.h"
+
+static int dwc_eth_dwmac_config_dt(struct platform_device *pdev,
+ struct plat_stmmacenet_data *plat_dat)
+{
+ struct device_node *np = pdev->dev.of_node;
+ u32 burst_map = 0;
+ u32 bit_index = 0;
+ u32 a_index = 0;
+
+ if (!plat_dat->axi) {
+ plat_dat->axi = kzalloc(sizeof(struct stmmac_axi), GFP_KERNEL);
+
+ if (!plat_dat->axi)
+ return -ENOMEM;
+ }
+
+ plat_dat->axi->axi_lpi_en = of_property_read_bool(np, "snps,en-lpi");
+ if (of_property_read_u32(np, "snps,write-requests",
+ &plat_dat->axi->axi_wr_osr_lmt)) {
+ /**
+ * Since the register has a reset value of 1, if property
+ * is missing, default to 1.
+ */
+ plat_dat->axi->axi_wr_osr_lmt = 1;
+ } else {
+ /**
+ * If property exists, to keep the behavior from dwc_eth_qos,
+ * subtract one after parsing.
+ */
+ plat_dat->axi->axi_wr_osr_lmt--;
+ }
+
+ if (of_property_read_u32(np, "read,read-requests",
+ &plat_dat->axi->axi_rd_osr_lmt)) {
+ /**
+ * Since the register has a reset value of 1, if property
+ * is missing, default to 1.
+ */
+ plat_dat->axi->axi_rd_osr_lmt = 1;
+ } else {
+ /**
+ * If property exists, to keep the behavior from dwc_eth_qos,
+ * subtract one after parsing.
+ */
+ plat_dat->axi->axi_rd_osr_lmt--;
+ }
+ of_property_read_u32(np, "snps,burst-map", &burst_map);
+
+ /* converts burst-map bitmask to burst array */
+ for (bit_index = 0; bit_index < 7; bit_index++) {
+ if (burst_map & (1 << bit_index)) {
+ switch (bit_index) {
+ case 0:
+ plat_dat->axi->axi_blen[a_index] = 4; break;
+ case 1:
+ plat_dat->axi->axi_blen[a_index] = 8; break;
+ case 2:
+ plat_dat->axi->axi_blen[a_index] = 16; break;
+ case 3:
+ plat_dat->axi->axi_blen[a_index] = 32; break;
+ case 4:
+ plat_dat->axi->axi_blen[a_index] = 64; break;
+ case 5:
+ plat_dat->axi->axi_blen[a_index] = 128; break;
+ case 6:
+ plat_dat->axi->axi_blen[a_index] = 256; break;
+ default:
+ break;
+ }
+ a_index++;
+ }
+ }
+
+ /* dwc-qos needs GMAC4, AAL, TSO and PMT */
+ plat_dat->has_gmac4 = 1;
+ plat_dat->dma_cfg->aal = 1;
+ plat_dat->tso_en = 1;
+ plat_dat->pmt = 1;
+
+ return 0;
+}
+
+static int dwc_eth_dwmac_probe(struct platform_device *pdev)
+{
+ struct plat_stmmacenet_data *plat_dat;
+ struct stmmac_resources stmmac_res;
+ struct resource *res;
+ int ret;
+
+ memset(&stmmac_res, 0, sizeof(struct stmmac_resources));
+
+ /**
+ * Since stmmac_platform supports name IRQ only, basic platform
+ * resource initialization is done in the glue logic.
+ */
+ stmmac_res.irq = platform_get_irq(pdev, 0);
+ if (stmmac_res.irq < 0) {
+ if (stmmac_res.irq != -EPROBE_DEFER)
+ dev_err(&pdev->dev,
+ "IRQ configuration information not found\n");
+
+ return stmmac_res.irq;
+ }
+ stmmac_res.wol_irq = stmmac_res.irq;
+
+ res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+ stmmac_res.addr = devm_ioremap_resource(&pdev->dev, res);
+ if (IS_ERR(stmmac_res.addr))
+ return PTR_ERR(stmmac_res.addr);
+
+ plat_dat = stmmac_probe_config_dt(pdev, &stmmac_res.mac);
+ if (IS_ERR(plat_dat))
+ return PTR_ERR(plat_dat);
+
+ plat_dat->stmmac_clk = devm_clk_get(&pdev->dev, "apb_pclk");
+ if (IS_ERR(plat_dat->stmmac_clk)) {
+ dev_err(&pdev->dev, "apb_pclk clock not found.\n");
+ ret = PTR_ERR(plat_dat->stmmac_clk);
+ plat_dat->stmmac_clk = NULL;
+ goto err_remove_config_dt;
+ }
+ clk_prepare_enable(plat_dat->stmmac_clk);
+
+ plat_dat->pclk = devm_clk_get(&pdev->dev, "phy_ref_clk");
+ if (IS_ERR(plat_dat->pclk)) {
+ dev_err(&pdev->dev, "phy_ref_clk clock not found.\n");
+ ret = PTR_ERR(plat_dat->pclk);
+ plat_dat->pclk = NULL;
+ goto err_out_clk_dis_phy;
+ }
+ clk_prepare_enable(plat_dat->pclk);
+
+ ret = dwc_eth_dwmac_config_dt(pdev, plat_dat);
+ if (ret)
+ goto err_out_clk_dis_aper;
+
+ ret = stmmac_dvr_probe(&pdev->dev, plat_dat, &stmmac_res);
+ if (ret)
+ goto err_out_clk_dis_aper;
+
+ return 0;
+
+err_out_clk_dis_aper:
+ clk_disable_unprepare(plat_dat->pclk);
+err_out_clk_dis_phy:
+ clk_disable_unprepare(plat_dat->stmmac_clk);
+err_remove_config_dt:
+ stmmac_remove_config_dt(pdev, plat_dat);
+
+ return ret;
+}
+
+static int dwc_eth_dwmac_remove(struct platform_device *pdev)
+{
+ return stmmac_pltfr_remove(pdev);
+}
+
+static const struct of_device_id dwc_eth_dwmac_match[] = {
+ { .compatible = "snps,dwc-qos-ethernet-4.10", },
+ { }
+};
+MODULE_DEVICE_TABLE(of, dwc_eth_dwmac_match);
+
+static struct platform_driver dwc_eth_dwmac_driver = {
+ .probe = dwc_eth_dwmac_probe,
+ .remove = dwc_eth_dwmac_remove,
+ .driver = {
+ .name = "dwc-eth-dwmac",
+ .of_match_table = dwc_eth_dwmac_match,
+ },
+};
+module_platform_driver(dwc_eth_dwmac_driver);
+
+MODULE_AUTHOR("Joao Pinto <jpinto@synopsys.com>");
+MODULE_DESCRIPTION("Synopsys DWC Ethernet Quality-of-Service v4.10a driver");
+MODULE_LICENSE("GPL v2");
--- a/drivers/net/ethernet/stmicro/stmmac/dwmac-meson8b.c
+++ b/drivers/net/ethernet/stmicro/stmmac/dwmac-meson8b.c
@@ -35,10 +35,6 @@
#define PRG_ETH0_TXDLY_SHIFT 5
#define PRG_ETH0_TXDLY_MASK GENMASK(6, 5)
-#define PRG_ETH0_TXDLY_OFF (0x0 << PRG_ETH0_TXDLY_SHIFT)
-#define PRG_ETH0_TXDLY_QUARTER (0x1 << PRG_ETH0_TXDLY_SHIFT)
-#define PRG_ETH0_TXDLY_HALF (0x2 << PRG_ETH0_TXDLY_SHIFT)
-#define PRG_ETH0_TXDLY_THREE_QUARTERS (0x3 << PRG_ETH0_TXDLY_SHIFT)
/* divider for the result of m250_sel */
#define PRG_ETH0_CLK_M250_DIV_SHIFT 7
@@ -69,6 +65,8 @@ struct meson8b_dwmac {
struct clk_divider m25_div;
struct clk *m25_div_clk;
+
+ u32 tx_delay_ns;
};
static void meson8b_dwmac_mask_bits(struct meson8b_dwmac *dwmac, u32 reg,
@@ -179,11 +177,19 @@ static int meson8b_init_prg_eth(struct m
{
int ret;
unsigned long clk_rate;
+ u8 tx_dly_val = 0;
switch (dwmac->phy_mode) {
case PHY_INTERFACE_MODE_RGMII:
- case PHY_INTERFACE_MODE_RGMII_ID:
case PHY_INTERFACE_MODE_RGMII_RXID:
+ /* TX clock delay in ns = "8ns / 4 * tx_dly_val" (where
+ * 8ns are exactly one cycle of the 125MHz RGMII TX clock):
+ * 0ns = 0x0, 2ns = 0x1, 4ns = 0x2, 6ns = 0x3
+ */
+ tx_dly_val = dwmac->tx_delay_ns >> 1;
+ /* fall through */
+
+ case PHY_INTERFACE_MODE_RGMII_ID:
case PHY_INTERFACE_MODE_RGMII_TXID:
/* Generate a 25MHz clock for the PHY */
clk_rate = 25 * 1000 * 1000;
@@ -196,9 +202,8 @@ static int meson8b_init_prg_eth(struct m
meson8b_dwmac_mask_bits(dwmac, PRG_ETH0,
PRG_ETH0_INVERTED_RMII_CLK, 0);
- /* TX clock delay - all known boards use a 1/4 cycle delay */
meson8b_dwmac_mask_bits(dwmac, PRG_ETH0, PRG_ETH0_TXDLY_MASK,
- PRG_ETH0_TXDLY_QUARTER);
+ tx_dly_val << PRG_ETH0_TXDLY_SHIFT);
break;
case PHY_INTERFACE_MODE_RMII:
@@ -284,6 +289,11 @@ static int meson8b_dwmac_probe(struct pl
goto err_remove_config_dt;
}
+ /* use 2ns as fallback since this value was previously hardcoded */
+ if (of_property_read_u32(pdev->dev.of_node, "amlogic,tx-delay-ns",
+ &dwmac->tx_delay_ns))
+ dwmac->tx_delay_ns = 2;
+
ret = meson8b_init_clk(dwmac);
if (ret)
goto err_remove_config_dt;
--- a/drivers/net/ethernet/stmicro/stmmac/dwmac-rk.c
+++ b/drivers/net/ethernet/stmicro/stmmac/dwmac-rk.c
@@ -302,6 +302,122 @@ static const struct rk_gmac_ops rk3288_o
.set_rmii_speed = rk3288_set_rmii_speed,
};
+#define RK3328_GRF_MAC_CON0 0x0900
+#define RK3328_GRF_MAC_CON1 0x0904
+
+/* RK3328_GRF_MAC_CON0 */
+#define RK3328_GMAC_CLK_RX_DL_CFG(val) HIWORD_UPDATE(val, 0x7F, 7)
+#define RK3328_GMAC_CLK_TX_DL_CFG(val) HIWORD_UPDATE(val, 0x7F, 0)
+
+/* RK3328_GRF_MAC_CON1 */
+#define RK3328_GMAC_PHY_INTF_SEL_RGMII \
+ (GRF_BIT(4) | GRF_CLR_BIT(5) | GRF_CLR_BIT(6))
+#define RK3328_GMAC_PHY_INTF_SEL_RMII \
+ (GRF_CLR_BIT(4) | GRF_CLR_BIT(5) | GRF_BIT(6))
+#define RK3328_GMAC_FLOW_CTRL GRF_BIT(3)
+#define RK3328_GMAC_FLOW_CTRL_CLR GRF_CLR_BIT(3)
+#define RK3328_GMAC_SPEED_10M GRF_CLR_BIT(2)
+#define RK3328_GMAC_SPEED_100M GRF_BIT(2)
+#define RK3328_GMAC_RMII_CLK_25M GRF_BIT(7)
+#define RK3328_GMAC_RMII_CLK_2_5M GRF_CLR_BIT(7)
+#define RK3328_GMAC_CLK_125M (GRF_CLR_BIT(11) | GRF_CLR_BIT(12))
+#define RK3328_GMAC_CLK_25M (GRF_BIT(11) | GRF_BIT(12))
+#define RK3328_GMAC_CLK_2_5M (GRF_CLR_BIT(11) | GRF_BIT(12))
+#define RK3328_GMAC_RMII_MODE GRF_BIT(9)
+#define RK3328_GMAC_RMII_MODE_CLR GRF_CLR_BIT(9)
+#define RK3328_GMAC_TXCLK_DLY_ENABLE GRF_BIT(0)
+#define RK3328_GMAC_TXCLK_DLY_DISABLE GRF_CLR_BIT(0)
+#define RK3328_GMAC_RXCLK_DLY_ENABLE GRF_BIT(1)
+#define RK3328_GMAC_RXCLK_DLY_DISABLE GRF_CLR_BIT(0)
+
+static void rk3328_set_to_rgmii(struct rk_priv_data *bsp_priv,
+ int tx_delay, int rx_delay)
+{
+ struct device *dev = &bsp_priv->pdev->dev;
+
+ if (IS_ERR(bsp_priv->grf)) {
+ dev_err(dev, "Missing rockchip,grf property\n");
+ return;
+ }
+
+ regmap_write(bsp_priv->grf, RK3328_GRF_MAC_CON1,
+ RK3328_GMAC_PHY_INTF_SEL_RGMII |
+ RK3328_GMAC_RMII_MODE_CLR |
+ RK3328_GMAC_RXCLK_DLY_ENABLE |
+ RK3328_GMAC_TXCLK_DLY_ENABLE);
+
+ regmap_write(bsp_priv->grf, RK3328_GRF_MAC_CON0,
+ RK3328_GMAC_CLK_RX_DL_CFG(rx_delay) |
+ RK3328_GMAC_CLK_TX_DL_CFG(tx_delay));
+}
+
+static void rk3328_set_to_rmii(struct rk_priv_data *bsp_priv)
+{
+ struct device *dev = &bsp_priv->pdev->dev;
+
+ if (IS_ERR(bsp_priv->grf)) {
+ dev_err(dev, "Missing rockchip,grf property\n");
+ return;
+ }
+
+ regmap_write(bsp_priv->grf, RK3328_GRF_MAC_CON1,
+ RK3328_GMAC_PHY_INTF_SEL_RMII |
+ RK3328_GMAC_RMII_MODE);
+
+ /* set MAC to RMII mode */
+ regmap_write(bsp_priv->grf, RK3328_GRF_MAC_CON1, GRF_BIT(11));
+}
+
+static void rk3328_set_rgmii_speed(struct rk_priv_data *bsp_priv, int speed)
+{
+ struct device *dev = &bsp_priv->pdev->dev;
+
+ if (IS_ERR(bsp_priv->grf)) {
+ dev_err(dev, "Missing rockchip,grf property\n");
+ return;
+ }
+
+ if (speed == 10)
+ regmap_write(bsp_priv->grf, RK3328_GRF_MAC_CON1,
+ RK3328_GMAC_CLK_2_5M);
+ else if (speed == 100)
+ regmap_write(bsp_priv->grf, RK3328_GRF_MAC_CON1,
+ RK3328_GMAC_CLK_25M);
+ else if (speed == 1000)
+ regmap_write(bsp_priv->grf, RK3328_GRF_MAC_CON1,
+ RK3328_GMAC_CLK_125M);
+ else
+ dev_err(dev, "unknown speed value for RGMII! speed=%d", speed);
+}
+
+static void rk3328_set_rmii_speed(struct rk_priv_data *bsp_priv, int speed)
+{
+ struct device *dev = &bsp_priv->pdev->dev;
+
+ if (IS_ERR(bsp_priv->grf)) {
+ dev_err(dev, "Missing rockchip,grf property\n");
+ return;
+ }
+
+ if (speed == 10)
+ regmap_write(bsp_priv->grf, RK3328_GRF_MAC_CON1,
+ RK3328_GMAC_RMII_CLK_2_5M |
+ RK3328_GMAC_SPEED_10M);
+ else if (speed == 100)
+ regmap_write(bsp_priv->grf, RK3328_GRF_MAC_CON1,
+ RK3328_GMAC_RMII_CLK_25M |
+ RK3328_GMAC_SPEED_100M);
+ else
+ dev_err(dev, "unknown speed value for RMII! speed=%d", speed);
+}
+
+static const struct rk_gmac_ops rk3328_ops = {
+ .set_to_rgmii = rk3328_set_to_rgmii,
+ .set_to_rmii = rk3328_set_to_rmii,
+ .set_rgmii_speed = rk3328_set_rgmii_speed,
+ .set_rmii_speed = rk3328_set_rmii_speed,
+};
+
#define RK3366_GRF_SOC_CON6 0x0418
#define RK3366_GRF_SOC_CON7 0x041c
@@ -1006,6 +1122,7 @@ static SIMPLE_DEV_PM_OPS(rk_gmac_pm_ops,
static const struct of_device_id rk_gmac_dwmac_match[] = {
{ .compatible = "rockchip,rk3228-gmac", .data = &rk3228_ops },
{ .compatible = "rockchip,rk3288-gmac", .data = &rk3288_ops },
+ { .compatible = "rockchip,rk3328-gmac", .data = &rk3328_ops },
{ .compatible = "rockchip,rk3366-gmac", .data = &rk3366_ops },
{ .compatible = "rockchip,rk3368-gmac", .data = &rk3368_ops },
{ .compatible = "rockchip,rk3399-gmac", .data = &rk3399_ops },
--- a/drivers/net/ethernet/stmicro/stmmac/dwmac-socfpga.c
+++ b/drivers/net/ethernet/stmicro/stmmac/dwmac-socfpga.c
@@ -341,7 +341,7 @@ static int socfpga_dwmac_probe(struct pl
* mode. Create a copy of the core reset handle so it can be used by
* the driver later.
*/
- dwmac->stmmac_rst = stpriv->stmmac_rst;
+ dwmac->stmmac_rst = stpriv->plat->stmmac_rst;
ret = socfpga_dwmac_set_phy_mode(dwmac);
if (ret)
--- a/drivers/net/ethernet/stmicro/stmmac/dwmac100.h
+++ b/drivers/net/ethernet/stmicro/stmmac/dwmac100.h
@@ -12,10 +12,6 @@
FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
more details.
- You should have received a copy of the GNU General Public License along with
- this program; if not, write to the Free Software Foundation, Inc.,
- 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
-
The full GNU General Public License is included in this distribution in
the file called "COPYING".
--- a/drivers/net/ethernet/stmicro/stmmac/dwmac1000.h
+++ b/drivers/net/ethernet/stmicro/stmmac/dwmac1000.h
@@ -10,10 +10,6 @@
FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
more details.
- You should have received a copy of the GNU General Public License along with
- this program; if not, write to the Free Software Foundation, Inc.,
- 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
-
The full GNU General Public License is included in this distribution in
the file called "COPYING".
--- a/drivers/net/ethernet/stmicro/stmmac/dwmac1000_core.c
+++ b/drivers/net/ethernet/stmicro/stmmac/dwmac1000_core.c
@@ -16,10 +16,6 @@
FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
more details.
- You should have received a copy of the GNU General Public License along with
- this program; if not, write to the Free Software Foundation, Inc.,
- 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
-
The full GNU General Public License is included in this distribution in
the file called "COPYING".
@@ -96,17 +92,13 @@ static int dwmac1000_rx_ipc_enable(struc
return !!(value & GMAC_CONTROL_IPC);
}
-static void dwmac1000_dump_regs(struct mac_device_info *hw)
+static void dwmac1000_dump_regs(struct mac_device_info *hw, u32 *reg_space)
{
void __iomem *ioaddr = hw->pcsr;
int i;
- pr_info("\tDWMAC1000 regs (base addr = 0x%p)\n", ioaddr);
- for (i = 0; i < 55; i++) {
- int offset = i * 4;
- pr_info("\tReg No. %d (offset 0x%x): 0x%08x\n", i,
- offset, readl(ioaddr + offset));
- }
+ for (i = 0; i < 55; i++)
+ reg_space[i] = readl(ioaddr + i * 4);
}
static void dwmac1000_set_umac_addr(struct mac_device_info *hw,
@@ -347,11 +339,14 @@ static int dwmac1000_irq_status(struct m
return ret;
}
-static void dwmac1000_set_eee_mode(struct mac_device_info *hw)
+static void dwmac1000_set_eee_mode(struct mac_device_info *hw,
+ bool en_tx_lpi_clockgating)
{
void __iomem *ioaddr = hw->pcsr;
u32 value;
+ /*TODO - en_tx_lpi_clockgating treatment */
+
/* Enable the link status receive on RGMII, SGMII ore SMII
* receive path and instruct the transmit to enter in LPI
* state.
--- a/drivers/net/ethernet/stmicro/stmmac/dwmac1000_dma.c
+++ b/drivers/net/ethernet/stmicro/stmmac/dwmac1000_dma.c
@@ -16,10 +16,6 @@
FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
more details.
- You should have received a copy of the GNU General Public License along with
- this program; if not, write to the Free Software Foundation, Inc.,
- 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
-
The full GNU General Public License is included in this distribution in
the file called "COPYING".
@@ -205,18 +201,14 @@ static void dwmac1000_dma_operation_mode
writel(csr6, ioaddr + DMA_CONTROL);
}
-static void dwmac1000_dump_dma_regs(void __iomem *ioaddr)
+static void dwmac1000_dump_dma_regs(void __iomem *ioaddr, u32 *reg_space)
{
int i;
- pr_info(" DMA registers\n");
- for (i = 0; i < 22; i++) {
- if ((i < 9) || (i > 17)) {
- int offset = i * 4;
- pr_err("\t Reg No. %d (offset 0x%x): 0x%08x\n", i,
- (DMA_BUS_MODE + offset),
- readl(ioaddr + DMA_BUS_MODE + offset));
- }
- }
+
+ for (i = 0; i < 22; i++)
+ if ((i < 9) || (i > 17))
+ reg_space[DMA_BUS_MODE / 4 + i] =
+ readl(ioaddr + DMA_BUS_MODE + i * 4);
}
static void dwmac1000_get_hw_feature(void __iomem *ioaddr,
--- a/drivers/net/ethernet/stmicro/stmmac/dwmac100_core.c
+++ b/drivers/net/ethernet/stmicro/stmmac/dwmac100_core.c
@@ -18,10 +18,6 @@
FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
more details.
- You should have received a copy of the GNU General Public License along with
- this program; if not, write to the Free Software Foundation, Inc.,
- 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
-
The full GNU General Public License is included in this distribution in
the file called "COPYING".
@@ -44,28 +40,18 @@ static void dwmac100_core_init(struct ma
#endif
}
-static void dwmac100_dump_mac_regs(struct mac_device_info *hw)
+static void dwmac100_dump_mac_regs(struct mac_device_info *hw, u32 *reg_space)
{
void __iomem *ioaddr = hw->pcsr;
- pr_info("\t----------------------------------------------\n"
- "\t DWMAC 100 CSR (base addr = 0x%p)\n"
- "\t----------------------------------------------\n", ioaddr);
- pr_info("\tcontrol reg (offset 0x%x): 0x%08x\n", MAC_CONTROL,
- readl(ioaddr + MAC_CONTROL));
- pr_info("\taddr HI (offset 0x%x): 0x%08x\n ", MAC_ADDR_HIGH,
- readl(ioaddr + MAC_ADDR_HIGH));
- pr_info("\taddr LO (offset 0x%x): 0x%08x\n", MAC_ADDR_LOW,
- readl(ioaddr + MAC_ADDR_LOW));
- pr_info("\tmulticast hash HI (offset 0x%x): 0x%08x\n",
- MAC_HASH_HIGH, readl(ioaddr + MAC_HASH_HIGH));
- pr_info("\tmulticast hash LO (offset 0x%x): 0x%08x\n",
- MAC_HASH_LOW, readl(ioaddr + MAC_HASH_LOW));
- pr_info("\tflow control (offset 0x%x): 0x%08x\n",
- MAC_FLOW_CTRL, readl(ioaddr + MAC_FLOW_CTRL));
- pr_info("\tVLAN1 tag (offset 0x%x): 0x%08x\n", MAC_VLAN1,
- readl(ioaddr + MAC_VLAN1));
- pr_info("\tVLAN2 tag (offset 0x%x): 0x%08x\n", MAC_VLAN2,
- readl(ioaddr + MAC_VLAN2));
+
+ reg_space[MAC_CONTROL / 4] = readl(ioaddr + MAC_CONTROL);
+ reg_space[MAC_ADDR_HIGH / 4] = readl(ioaddr + MAC_ADDR_HIGH);
+ reg_space[MAC_ADDR_LOW / 4] = readl(ioaddr + MAC_ADDR_LOW);
+ reg_space[MAC_HASH_HIGH / 4] = readl(ioaddr + MAC_HASH_HIGH);
+ reg_space[MAC_HASH_LOW / 4] = readl(ioaddr + MAC_HASH_LOW);
+ reg_space[MAC_FLOW_CTRL / 4] = readl(ioaddr + MAC_FLOW_CTRL);
+ reg_space[MAC_VLAN1 / 4] = readl(ioaddr + MAC_VLAN1);
+ reg_space[MAC_VLAN2 / 4] = readl(ioaddr + MAC_VLAN2);
}
static int dwmac100_rx_ipc_enable(struct mac_device_info *hw)
--- a/drivers/net/ethernet/stmicro/stmmac/dwmac100_dma.c
+++ b/drivers/net/ethernet/stmicro/stmmac/dwmac100_dma.c
@@ -18,10 +18,6 @@
FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
more details.
- You should have received a copy of the GNU General Public License along with
- this program; if not, write to the Free Software Foundation, Inc.,
- 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
-
The full GNU General Public License is included in this distribution in
the file called "COPYING".
@@ -70,19 +66,18 @@ static void dwmac100_dma_operation_mode(
writel(csr6, ioaddr + DMA_CONTROL);
}
-static void dwmac100_dump_dma_regs(void __iomem *ioaddr)
+static void dwmac100_dump_dma_regs(void __iomem *ioaddr, u32 *reg_space)
{
int i;
- pr_debug("DWMAC 100 DMA CSR\n");
for (i = 0; i < 9; i++)
- pr_debug("\t CSR%d (offset 0x%x): 0x%08x\n", i,
- (DMA_BUS_MODE + i * 4),
- readl(ioaddr + DMA_BUS_MODE + i * 4));
-
- pr_debug("\tCSR20 (0x%x): 0x%08x, CSR21 (0x%x): 0x%08x\n",
- DMA_CUR_TX_BUF_ADDR, readl(ioaddr + DMA_CUR_TX_BUF_ADDR),
- DMA_CUR_RX_BUF_ADDR, readl(ioaddr + DMA_CUR_RX_BUF_ADDR));
+ reg_space[DMA_BUS_MODE / 4 + i] =
+ readl(ioaddr + DMA_BUS_MODE + i * 4);
+
+ reg_space[DMA_CUR_TX_BUF_ADDR / 4] =
+ readl(ioaddr + DMA_CUR_TX_BUF_ADDR);
+ reg_space[DMA_CUR_RX_BUF_ADDR / 4] =
+ readl(ioaddr + DMA_CUR_RX_BUF_ADDR);
}
/* DMA controller has two counters to track the number of the missed frames. */
--- a/drivers/net/ethernet/stmicro/stmmac/dwmac4.h
+++ b/drivers/net/ethernet/stmicro/stmmac/dwmac4.h
@@ -22,6 +22,7 @@
#define GMAC_HASH_TAB_32_63 0x00000014
#define GMAC_RX_FLOW_CTRL 0x00000090
#define GMAC_QX_TX_FLOW_CTRL(x) (0x70 + x * 4)
+#define GMAC_RXQ_CTRL0 0x000000a0
#define GMAC_INT_STATUS 0x000000b0
#define GMAC_INT_EN 0x000000b4
#define GMAC_PCS_BASE 0x000000e0
@@ -44,6 +45,11 @@
#define GMAC_MAX_PERFECT_ADDRESSES 128
+/* MAC RX Queue Enable */
+#define GMAC_RX_QUEUE_CLEAR(queue) ~(GENMASK(1, 0) << ((queue) * 2))
+#define GMAC_RX_AV_QUEUE_ENABLE(queue) BIT((queue) * 2)
+#define GMAC_RX_DCB_QUEUE_ENABLE(queue) BIT(((queue) * 2) + 1)
+
/* MAC Flow Control RX */
#define GMAC_RX_FLOW_CTRL_RFE BIT(0)
@@ -84,6 +90,19 @@ enum power_event {
power_down = 0x00000001,
};
+/* Energy Efficient Ethernet (EEE) for GMAC4
+ *
+ * LPI status, timer and control register offset
+ */
+#define GMAC4_LPI_CTRL_STATUS 0xd0
+#define GMAC4_LPI_TIMER_CTRL 0xd4
+
+/* LPI control and status defines */
+#define GMAC4_LPI_CTRL_STATUS_LPITCSE BIT(21) /* LPI Tx Clock Stop Enable */
+#define GMAC4_LPI_CTRL_STATUS_LPITXA BIT(19) /* Enable LPI TX Automate */
+#define GMAC4_LPI_CTRL_STATUS_PLS BIT(17) /* PHY Link Status */
+#define GMAC4_LPI_CTRL_STATUS_LPIEN BIT(16) /* LPI Enable */
+
/* MAC Debug bitmap */
#define GMAC_DEBUG_TFCSTS_MASK GENMASK(18, 17)
#define GMAC_DEBUG_TFCSTS_SHIFT 17
@@ -133,6 +152,8 @@ enum power_event {
/* MAC HW features2 bitmap */
#define GMAC_HW_FEAT_TXCHCNT GENMASK(21, 18)
#define GMAC_HW_FEAT_RXCHCNT GENMASK(15, 12)
+#define GMAC_HW_FEAT_TXQCNT GENMASK(9, 6)
+#define GMAC_HW_FEAT_RXQCNT GENMASK(3, 0)
/* MAC HW ADDR regs */
#define GMAC_HI_DCS GENMASK(18, 16)
--- a/drivers/net/ethernet/stmicro/stmmac/dwmac4_core.c
+++ b/drivers/net/ethernet/stmicro/stmmac/dwmac4_core.c
@@ -59,19 +59,24 @@ static void dwmac4_core_init(struct mac_
writel(value, ioaddr + GMAC_INT_EN);
}
-static void dwmac4_dump_regs(struct mac_device_info *hw)
+static void dwmac4_rx_queue_enable(struct mac_device_info *hw, u32 queue)
{
void __iomem *ioaddr = hw->pcsr;
- int i;
+ u32 value = readl(ioaddr + GMAC_RXQ_CTRL0);
- pr_debug("\tDWMAC4 regs (base addr = 0x%p)\n", ioaddr);
+ value &= GMAC_RX_QUEUE_CLEAR(queue);
+ value |= GMAC_RX_AV_QUEUE_ENABLE(queue);
- for (i = 0; i < GMAC_REG_NUM; i++) {
- int offset = i * 4;
+ writel(value, ioaddr + GMAC_RXQ_CTRL0);
+}
- pr_debug("\tReg No. %d (offset 0x%x): 0x%08x\n", i,
- offset, readl(ioaddr + offset));
- }
+static void dwmac4_dump_regs(struct mac_device_info *hw, u32 *reg_space)
+{
+ void __iomem *ioaddr = hw->pcsr;
+ int i;
+
+ for (i = 0; i < GMAC_REG_NUM; i++)
+ reg_space[i] = readl(ioaddr + i * 4);
}
static int dwmac4_rx_ipc_enable(struct mac_device_info *hw)
@@ -126,6 +131,65 @@ static void dwmac4_get_umac_addr(struct
GMAC_ADDR_LOW(reg_n));
}
+static void dwmac4_set_eee_mode(struct mac_device_info *hw,
+ bool en_tx_lpi_clockgating)
+{
+ void __iomem *ioaddr = hw->pcsr;
+ u32 value;
+
+ /* Enable the link status receive on RGMII, SGMII ore SMII
+ * receive path and instruct the transmit to enter in LPI
+ * state.
+ */
+ value = readl(ioaddr + GMAC4_LPI_CTRL_STATUS);
+ value |= GMAC4_LPI_CTRL_STATUS_LPIEN | GMAC4_LPI_CTRL_STATUS_LPITXA;
+
+ if (en_tx_lpi_clockgating)
+ value |= GMAC4_LPI_CTRL_STATUS_LPITCSE;
+
+ writel(value, ioaddr + GMAC4_LPI_CTRL_STATUS);
+}
+
+static void dwmac4_reset_eee_mode(struct mac_device_info *hw)
+{
+ void __iomem *ioaddr = hw->pcsr;
+ u32 value;
+
+ value = readl(ioaddr + GMAC4_LPI_CTRL_STATUS);
+ value &= ~(GMAC4_LPI_CTRL_STATUS_LPIEN | GMAC4_LPI_CTRL_STATUS_LPITXA);
+ writel(value, ioaddr + GMAC4_LPI_CTRL_STATUS);
+}
+
+static void dwmac4_set_eee_pls(struct mac_device_info *hw, int link)
+{
+ void __iomem *ioaddr = hw->pcsr;
+ u32 value;
+
+ value = readl(ioaddr + GMAC4_LPI_CTRL_STATUS);
+
+ if (link)
+ value |= GMAC4_LPI_CTRL_STATUS_PLS;
+ else
+ value &= ~GMAC4_LPI_CTRL_STATUS_PLS;
+
+ writel(value, ioaddr + GMAC4_LPI_CTRL_STATUS);
+}
+
+static void dwmac4_set_eee_timer(struct mac_device_info *hw, int ls, int tw)
+{
+ void __iomem *ioaddr = hw->pcsr;
+ int value = ((tw & 0xffff)) | ((ls & 0x3ff) << 16);
+
+ /* Program the timers in the LPI timer control register:
+ * LS: minimum time (ms) for which the link
+ * status from PHY should be ok before transmitting
+ * the LPI pattern.
+ * TW: minimum time (us) for which the core waits
+ * after it has stopped transmitting the LPI pattern.
+ */
+ writel(value, ioaddr + GMAC4_LPI_TIMER_CTRL);
+}
+
static void dwmac4_set_filter(struct mac_device_info *hw,
struct net_device *dev)
{
@@ -392,12 +456,17 @@ static void dwmac4_debug(void __iomem *i
static const struct stmmac_ops dwmac4_ops = {
.core_init = dwmac4_core_init,
.rx_ipc = dwmac4_rx_ipc_enable,
+ .rx_queue_enable = dwmac4_rx_queue_enable,
.dump_regs = dwmac4_dump_regs,
.host_irq_status = dwmac4_irq_status,
.flow_ctrl = dwmac4_flow_ctrl,
.pmt = dwmac4_pmt,
.set_umac_addr = dwmac4_set_umac_addr,
.get_umac_addr = dwmac4_get_umac_addr,
+ .set_eee_mode = dwmac4_set_eee_mode,
+ .reset_eee_mode = dwmac4_reset_eee_mode,
+ .set_eee_timer = dwmac4_set_eee_timer,
+ .set_eee_pls = dwmac4_set_eee_pls,
.pcs_ctrl_ane = dwmac4_ctrl_ane,
.pcs_rane = dwmac4_rane,
.pcs_get_adv_lp = dwmac4_get_adv_lp,
--- a/drivers/net/ethernet/stmicro/stmmac/dwmac4_descs.c
+++ b/drivers/net/ethernet/stmicro/stmmac/dwmac4_descs.c
@@ -103,7 +103,7 @@ static int dwmac4_wrback_get_rx_status(v
x->rx_mii++;
if (unlikely(rdes3 & RDES3_CRC_ERROR)) {
- x->rx_crc++;
+ x->rx_crc_errors++;
stats->rx_crc_errors++;
}
--- a/drivers/net/ethernet/stmicro/stmmac/dwmac4_dma.c
+++ b/drivers/net/ethernet/stmicro/stmmac/dwmac4_dma.c
@@ -127,53 +127,51 @@ static void dwmac4_dma_init(void __iomem
dwmac4_dma_init_channel(ioaddr, dma_cfg, dma_tx, dma_rx, i);
}
-static void _dwmac4_dump_dma_regs(void __iomem *ioaddr, u32 channel)
+static void _dwmac4_dump_dma_regs(void __iomem *ioaddr, u32 channel,
+ u32 *reg_space)
{
- pr_debug(" Channel %d\n", channel);
- pr_debug("\tDMA_CHAN_CONTROL, offset: 0x%x, val: 0x%x\n", 0,
- readl(ioaddr + DMA_CHAN_CONTROL(channel)));
- pr_debug("\tDMA_CHAN_TX_CONTROL, offset: 0x%x, val: 0x%x\n", 0x4,
- readl(ioaddr + DMA_CHAN_TX_CONTROL(channel)));
- pr_debug("\tDMA_CHAN_RX_CONTROL, offset: 0x%x, val: 0x%x\n", 0x8,
- readl(ioaddr + DMA_CHAN_RX_CONTROL(channel)));
- pr_debug("\tDMA_CHAN_TX_BASE_ADDR, offset: 0x%x, val: 0x%x\n", 0x14,
- readl(ioaddr + DMA_CHAN_TX_BASE_ADDR(channel)));
- pr_debug("\tDMA_CHAN_RX_BASE_ADDR, offset: 0x%x, val: 0x%x\n", 0x1c,
- readl(ioaddr + DMA_CHAN_RX_BASE_ADDR(channel)));
- pr_debug("\tDMA_CHAN_TX_END_ADDR, offset: 0x%x, val: 0x%x\n", 0x20,
- readl(ioaddr + DMA_CHAN_TX_END_ADDR(channel)));
- pr_debug("\tDMA_CHAN_RX_END_ADDR, offset: 0x%x, val: 0x%x\n", 0x28,
- readl(ioaddr + DMA_CHAN_RX_END_ADDR(channel)));
- pr_debug("\tDMA_CHAN_TX_RING_LEN, offset: 0x%x, val: 0x%x\n", 0x2c,
- readl(ioaddr + DMA_CHAN_TX_RING_LEN(channel)));
- pr_debug("\tDMA_CHAN_RX_RING_LEN, offset: 0x%x, val: 0x%x\n", 0x30,
- readl(ioaddr + DMA_CHAN_RX_RING_LEN(channel)));
- pr_debug("\tDMA_CHAN_INTR_ENA, offset: 0x%x, val: 0x%x\n", 0x34,
- readl(ioaddr + DMA_CHAN_INTR_ENA(channel)));
- pr_debug("\tDMA_CHAN_RX_WATCHDOG, offset: 0x%x, val: 0x%x\n", 0x38,
- readl(ioaddr + DMA_CHAN_RX_WATCHDOG(channel)));
- pr_debug("\tDMA_CHAN_SLOT_CTRL_STATUS, offset: 0x%x, val: 0x%x\n", 0x3c,
- readl(ioaddr + DMA_CHAN_SLOT_CTRL_STATUS(channel)));
- pr_debug("\tDMA_CHAN_CUR_TX_DESC, offset: 0x%x, val: 0x%x\n", 0x44,
- readl(ioaddr + DMA_CHAN_CUR_TX_DESC(channel)));
- pr_debug("\tDMA_CHAN_CUR_RX_DESC, offset: 0x%x, val: 0x%x\n", 0x4c,
- readl(ioaddr + DMA_CHAN_CUR_RX_DESC(channel)));
- pr_debug("\tDMA_CHAN_CUR_TX_BUF_ADDR, offset: 0x%x, val: 0x%x\n", 0x54,
- readl(ioaddr + DMA_CHAN_CUR_TX_BUF_ADDR(channel)));
- pr_debug("\tDMA_CHAN_CUR_RX_BUF_ADDR, offset: 0x%x, val: 0x%x\n", 0x5c,
- readl(ioaddr + DMA_CHAN_CUR_RX_BUF_ADDR(channel)));
- pr_debug("\tDMA_CHAN_STATUS, offset: 0x%x, val: 0x%x\n", 0x60,
- readl(ioaddr + DMA_CHAN_STATUS(channel)));
+ reg_space[DMA_CHAN_CONTROL(channel) / 4] =
+ readl(ioaddr + DMA_CHAN_CONTROL(channel));
+ reg_space[DMA_CHAN_TX_CONTROL(channel) / 4] =
+ readl(ioaddr + DMA_CHAN_TX_CONTROL(channel));
+ reg_space[DMA_CHAN_RX_CONTROL(channel) / 4] =
+ readl(ioaddr + DMA_CHAN_RX_CONTROL(channel));
+ reg_space[DMA_CHAN_TX_BASE_ADDR(channel) / 4] =
+ readl(ioaddr + DMA_CHAN_TX_BASE_ADDR(channel));
+ reg_space[DMA_CHAN_RX_BASE_ADDR(channel) / 4] =
+ readl(ioaddr + DMA_CHAN_RX_BASE_ADDR(channel));
+ reg_space[DMA_CHAN_TX_END_ADDR(channel) / 4] =
+ readl(ioaddr + DMA_CHAN_TX_END_ADDR(channel));
+ reg_space[DMA_CHAN_RX_END_ADDR(channel) / 4] =
+ readl(ioaddr + DMA_CHAN_RX_END_ADDR(channel));
+ reg_space[DMA_CHAN_TX_RING_LEN(channel) / 4] =
+ readl(ioaddr + DMA_CHAN_TX_RING_LEN(channel));
+ reg_space[DMA_CHAN_RX_RING_LEN(channel) / 4] =
+ readl(ioaddr + DMA_CHAN_RX_RING_LEN(channel));
+ reg_space[DMA_CHAN_INTR_ENA(channel) / 4] =
+ readl(ioaddr + DMA_CHAN_INTR_ENA(channel));
+ reg_space[DMA_CHAN_RX_WATCHDOG(channel) / 4] =
+ readl(ioaddr + DMA_CHAN_RX_WATCHDOG(channel));
+ reg_space[DMA_CHAN_SLOT_CTRL_STATUS(channel) / 4] =
+ readl(ioaddr + DMA_CHAN_SLOT_CTRL_STATUS(channel));
+ reg_space[DMA_CHAN_CUR_TX_DESC(channel) / 4] =
+ readl(ioaddr + DMA_CHAN_CUR_TX_DESC(channel));
+ reg_space[DMA_CHAN_CUR_RX_DESC(channel) / 4] =
+ readl(ioaddr + DMA_CHAN_CUR_RX_DESC(channel));
+ reg_space[DMA_CHAN_CUR_TX_BUF_ADDR(channel) / 4] =
+ readl(ioaddr + DMA_CHAN_CUR_TX_BUF_ADDR(channel));
+ reg_space[DMA_CHAN_CUR_RX_BUF_ADDR(channel) / 4] =
+ readl(ioaddr + DMA_CHAN_CUR_RX_BUF_ADDR(channel));
+ reg_space[DMA_CHAN_STATUS(channel) / 4] =
+ readl(ioaddr + DMA_CHAN_STATUS(channel));
}
-static void dwmac4_dump_dma_regs(void __iomem *ioaddr)
+static void dwmac4_dump_dma_regs(void __iomem *ioaddr, u32 *reg_space)
{
int i;
- pr_debug(" GMAC4 DMA registers\n");
-
for (i = 0; i < DMA_CHANNEL_NB_MAX; i++)
- _dwmac4_dump_dma_regs(ioaddr, i);
+ _dwmac4_dump_dma_regs(ioaddr, i, reg_space);
}
static void dwmac4_rx_watchdog(void __iomem *ioaddr, u32 riwt)
@@ -303,6 +301,11 @@ static void dwmac4_get_hw_feature(void _
((hw_cap & GMAC_HW_FEAT_RXCHCNT) >> 12) + 1;
dma_cap->number_tx_channel =
((hw_cap & GMAC_HW_FEAT_TXCHCNT) >> 18) + 1;
+ /* TX and RX number of queues */
+ dma_cap->number_rx_queues =
+ ((hw_cap & GMAC_HW_FEAT_RXQCNT) >> 0) + 1;
+ dma_cap->number_tx_queues =
+ ((hw_cap & GMAC_HW_FEAT_TXQCNT) >> 6) + 1;
/* IEEE 1588-2002 */
dma_cap->time_stamp = 0;
--- a/drivers/net/ethernet/stmicro/stmmac/dwmac_dma.h
+++ b/drivers/net/ethernet/stmicro/stmmac/dwmac_dma.h
@@ -12,10 +12,6 @@
FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
more details.
- You should have received a copy of the GNU General Public License along with
- this program; if not, write to the Free Software Foundation, Inc.,
- 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
-
The full GNU General Public License is included in this distribution in
the file called "COPYING".
--- a/drivers/net/ethernet/stmicro/stmmac/dwmac_lib.c
+++ b/drivers/net/ethernet/stmicro/stmmac/dwmac_lib.c
@@ -10,10 +10,6 @@
FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
more details.
- You should have received a copy of the GNU General Public License along with
- this program; if not, write to the Free Software Foundation, Inc.,
- 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
-
The full GNU General Public License is included in this distribution in
the file called "COPYING".
@@ -21,6 +17,7 @@
*******************************************************************************/
#include <linux/io.h>
+#include <linux/iopoll.h>
#include "common.h"
#include "dwmac_dma.h"
@@ -29,19 +26,16 @@
int dwmac_dma_reset(void __iomem *ioaddr)
{
u32 value = readl(ioaddr + DMA_BUS_MODE);
- int limit;
+ int err;
/* DMA SW reset */
value |= DMA_BUS_MODE_SFT_RESET;
writel(value, ioaddr + DMA_BUS_MODE);
- limit = 10;
- while (limit--) {
- if (!(readl(ioaddr + DMA_BUS_MODE) & DMA_BUS_MODE_SFT_RESET))
- break;
- mdelay(10);
- }
- if (limit < 0)
+ err = readl_poll_timeout(ioaddr + DMA_BUS_MODE, value,
+ !(value & DMA_BUS_MODE_SFT_RESET),
+ 100000, 10000);
+ if (err)
return -EBUSY;
return 0;
@@ -102,7 +96,7 @@ static void show_tx_process_state(unsign
pr_debug("- TX (Stopped): Reset or Stop command\n");
break;
case 1:
- pr_debug("- TX (Running):Fetching the Tx desc\n");
+ pr_debug("- TX (Running): Fetching the Tx desc\n");
break;
case 2:
pr_debug("- TX (Running): Waiting for end of tx\n");
@@ -136,7 +130,7 @@ static void show_rx_process_state(unsign
pr_debug("- RX (Running): Fetching the Rx desc\n");
break;
case 2:
- pr_debug("- RX (Running):Checking for end of pkt\n");
+ pr_debug("- RX (Running): Checking for end of pkt\n");
break;
case 3:
pr_debug("- RX (Running): Waiting for Rx pkt\n");
@@ -246,7 +240,7 @@ void stmmac_set_mac_addr(void __iomem *i
unsigned long data;
data = (addr[5] << 8) | addr[4];
- /* For MAC Addr registers se have to set the Address Enable (AE)
+ /* For MAC Addr registers we have to set the Address Enable (AE)
* bit that has no effect on the High Reg 0 where the bit 31 (MO)
* is RO.
*/
@@ -261,9 +255,9 @@ void stmmac_set_mac(void __iomem *ioaddr
u32 value = readl(ioaddr + MAC_CTRL_REG);
if (enable)
- value |= MAC_RNABLE_RX | MAC_ENABLE_TX;
+ value |= MAC_ENABLE_RX | MAC_ENABLE_TX;
else
- value &= ~(MAC_ENABLE_TX | MAC_RNABLE_RX);
+ value &= ~(MAC_ENABLE_TX | MAC_ENABLE_RX);
writel(value, ioaddr + MAC_CTRL_REG);
}
--- a/drivers/net/ethernet/stmicro/stmmac/enh_desc.c
+++ b/drivers/net/ethernet/stmicro/stmmac/enh_desc.c
@@ -12,10 +12,6 @@
FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
more details.
- You should have received a copy of the GNU General Public License along with
- this program; if not, write to the Free Software Foundation, Inc.,
- 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
-
The full GNU General Public License is included in this distribution in
the file called "COPYING".
@@ -225,7 +221,7 @@ static int enh_desc_get_rx_status(void *
x->rx_mii++;
if (unlikely(rdes0 & RDES0_CRC_ERROR)) {
- x->rx_crc++;
+ x->rx_crc_errors++;
stats->rx_crc_errors++;
}
ret = discard_frame;
--- a/drivers/net/ethernet/stmicro/stmmac/mmc.h
+++ b/drivers/net/ethernet/stmicro/stmmac/mmc.h
@@ -12,10 +12,6 @@
FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
more details.
- You should have received a copy of the GNU General Public License along with
- this program; if not, write to the Free Software Foundation, Inc.,
- 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
-
The full GNU General Public License is included in this distribution in
the file called "COPYING".
--- a/drivers/net/ethernet/stmicro/stmmac/mmc_core.c
+++ b/drivers/net/ethernet/stmicro/stmmac/mmc_core.c
@@ -12,10 +12,6 @@
FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
more details.
- You should have received a copy of the GNU General Public License along with
- this program; if not, write to the Free Software Foundation, Inc.,
- 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
-
The full GNU General Public License is included in this distribution in
the file called "COPYING".
--- a/drivers/net/ethernet/stmicro/stmmac/norm_desc.c
+++ b/drivers/net/ethernet/stmicro/stmmac/norm_desc.c
@@ -12,10 +12,6 @@
FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
more details.
- You should have received a copy of the GNU General Public License along with
- this program; if not, write to the Free Software Foundation, Inc.,
- 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
-
The full GNU General Public License is included in this distribution in
the file called "COPYING".
@@ -115,7 +111,7 @@ static int ndesc_get_rx_status(void *dat
stats->collisions++;
}
if (unlikely(rdes0 & RDES0_CRC_ERROR)) {
- x->rx_crc++;
+ x->rx_crc_errors++;
stats->rx_crc_errors++;
}
ret = discard_frame;
--- a/drivers/net/ethernet/stmicro/stmmac/ring_mode.c
+++ b/drivers/net/ethernet/stmicro/stmmac/ring_mode.c
@@ -16,10 +16,6 @@
FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
more details.
- You should have received a copy of the GNU General Public License along with
- this program; if not, write to the Free Software Foundation, Inc.,
- 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
-
The full GNU General Public License is included in this distribution in
the file called "COPYING".
--- a/drivers/net/ethernet/stmicro/stmmac/stmmac.h
+++ b/drivers/net/ethernet/stmicro/stmmac/stmmac.h
@@ -10,10 +10,6 @@
FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
more details.
- You should have received a copy of the GNU General Public License along with
- this program; if not, write to the Free Software Foundation, Inc.,
- 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
-
The full GNU General Public License is included in this distribution in
the file called "COPYING".
@@ -106,9 +102,6 @@ struct stmmac_priv {
u32 msg_enable;
int wolopts;
int wol_irq;
- struct clk *stmmac_clk;
- struct clk *pclk;
- struct reset_control *stmmac_rst;
int clk_csr;
struct timer_list eee_ctrl_timer;
int lpi_irq;
@@ -120,8 +113,6 @@ struct stmmac_priv {
struct ptp_clock *ptp_clock;
struct ptp_clock_info ptp_clock_ops;
unsigned int default_addend;
- struct clk *clk_ptp_ref;
- unsigned int clk_ptp_rate;
u32 adv_ts;
int use_riwt;
int irq_wake;
--- a/drivers/net/ethernet/stmicro/stmmac/stmmac_ethtool.c
+++ b/drivers/net/ethernet/stmicro/stmmac/stmmac_ethtool.c
@@ -12,10 +12,6 @@
FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
more details.
- You should have received a copy of the GNU General Public License along with
- this program; if not, write to the Free Software Foundation, Inc.,
- 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
-
The full GNU General Public License is included in this distribution in
the file called "COPYING".
@@ -65,7 +61,7 @@ static const struct stmmac_stats stmmac_
STMMAC_STAT(overflow_error),
STMMAC_STAT(ipc_csum_error),
STMMAC_STAT(rx_collision),
- STMMAC_STAT(rx_crc),
+ STMMAC_STAT(rx_crc_errors),
STMMAC_STAT(dribbling_bit),
STMMAC_STAT(rx_length),
STMMAC_STAT(rx_mii),
@@ -439,32 +435,14 @@ static int stmmac_ethtool_get_regs_len(s
static void stmmac_ethtool_gregs(struct net_device *dev,
struct ethtool_regs *regs, void *space)
{
- int i;
u32 *reg_space = (u32 *) space;
struct stmmac_priv *priv = netdev_priv(dev);
memset(reg_space, 0x0, REG_SPACE_SIZE);
- if (!(priv->plat->has_gmac || priv->plat->has_gmac4)) {
- /* MAC registers */
- for (i = 0; i < 12; i++)
- reg_space[i] = readl(priv->ioaddr + (i * 4));
- /* DMA registers */
- for (i = 0; i < 9; i++)
- reg_space[i + 12] =
- readl(priv->ioaddr + (DMA_BUS_MODE + (i * 4)));
- reg_space[22] = readl(priv->ioaddr + DMA_CUR_TX_BUF_ADDR);
- reg_space[23] = readl(priv->ioaddr + DMA_CUR_RX_BUF_ADDR);
- } else {
- /* MAC registers */
- for (i = 0; i < 55; i++)
- reg_space[i] = readl(priv->ioaddr + (i * 4));
- /* DMA registers */
- for (i = 0; i < 22; i++)
- reg_space[i + 55] =
- readl(priv->ioaddr + (DMA_BUS_MODE + (i * 4)));
- }
+ priv->hw->mac->dump_regs(priv->hw, reg_space);
+ priv->hw->dma->dump_regs(priv->ioaddr, reg_space);
}
static void
@@ -712,7 +690,7 @@ static int stmmac_ethtool_op_set_eee(str
static u32 stmmac_usec2riwt(u32 usec, struct stmmac_priv *priv)
{
- unsigned long clk = clk_get_rate(priv->stmmac_clk);
+ unsigned long clk = clk_get_rate(priv->plat->stmmac_clk);
if (!clk)
return 0;
@@ -722,7 +700,7 @@ static u32 stmmac_usec2riwt(u32 usec, st
static u32 stmmac_riwt2usec(u32 riwt, struct stmmac_priv *priv)
{
- unsigned long clk = clk_get_rate(priv->stmmac_clk);
+ unsigned long clk = clk_get_rate(priv->plat->stmmac_clk);
if (!clk)
return 0;
--- a/drivers/net/ethernet/stmicro/stmmac/stmmac_hwtstamp.c
+++ b/drivers/net/ethernet/stmicro/stmmac/stmmac_hwtstamp.c
@@ -12,10 +12,6 @@
FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
more details.
- You should have received a copy of the GNU General Public License along with
- this program; if not, write to the Free Software Foundation, Inc.,
- 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
-
The full GNU General Public License is included in this distribution in
the file called "COPYING".
--- a/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c
+++ b/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c
@@ -13,10 +13,6 @@
FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
more details.
- You should have received a copy of the GNU General Public License along with
- this program; if not, write to the Free Software Foundation, Inc.,
- 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
-
The full GNU General Public License is included in this distribution in
the file called "COPYING".
@@ -158,7 +154,7 @@ static void stmmac_clk_csr_set(struct st
{
u32 clk_rate;
- clk_rate = clk_get_rate(priv->stmmac_clk);
+ clk_rate = clk_get_rate(priv->plat->stmmac_clk);
/* Platform provided default clk_csr would be assumed valid
* for all other cases except for the below mentioned ones.
@@ -191,7 +187,7 @@ static void print_pkt(unsigned char *buf
static inline u32 stmmac_tx_avail(struct stmmac_priv *priv)
{
- unsigned avail;
+ u32 avail;
if (priv->dirty_tx > priv->cur_tx)
avail = priv->dirty_tx - priv->cur_tx - 1;
@@ -203,7 +199,7 @@ static inline u32 stmmac_tx_avail(struct
static inline u32 stmmac_rx_dirty(struct stmmac_priv *priv)
{
- unsigned dirty;
+ u32 dirty;
if (priv->dirty_rx <= priv->cur_rx)
dirty = priv->cur_rx - priv->dirty_rx;
@@ -216,7 +212,7 @@ static inline u32 stmmac_rx_dirty(struct
/**
* stmmac_hw_fix_mac_speed - callback for speed selection
* @priv: driver private structure
- * Description: on some platforms (e.g. ST), some HW system configuraton
+ * Description: on some platforms (e.g. ST), some HW system configuration
* registers have to be set according to the link speed negotiated.
*/
static inline void stmmac_hw_fix_mac_speed(struct stmmac_priv *priv)
@@ -239,7 +235,8 @@ static void stmmac_enable_eee_mode(struc
/* Check and enter in LPI mode */
if ((priv->dirty_tx == priv->cur_tx) &&
(priv->tx_path_in_lpi_mode == false))
- priv->hw->mac->set_eee_mode(priv->hw);
+ priv->hw->mac->set_eee_mode(priv->hw,
+ priv->plat->en_tx_lpi_clockgating);
}
/**
@@ -415,7 +412,7 @@ static void stmmac_get_rx_hwtstamp(struc
/**
* stmmac_hwtstamp_ioctl - control hardware timestamping.
* @dev: device pointer.
- * @ifr: An IOCTL specefic structure, that can contain a pointer to
+ * @ifr: An IOCTL specific structure, that can contain a pointer to
* a proprietary structure used to pass information to the driver.
* Description:
* This function configures the MAC to enable/disable both outgoing(TX)
@@ -606,7 +603,7 @@ static int stmmac_hwtstamp_ioctl(struct
/* program Sub Second Increment reg */
sec_inc = priv->hw->ptp->config_sub_second_increment(
- priv->ptpaddr, priv->clk_ptp_rate,
+ priv->ptpaddr, priv->plat->clk_ptp_rate,
priv->plat->has_gmac4);
temp = div_u64(1000000000ULL, sec_inc);
@@ -616,7 +613,7 @@ static int stmmac_hwtstamp_ioctl(struct
* where, freq_div_ratio = 1e9ns/sec_inc
*/
temp = (u64)(temp << 32);
- priv->default_addend = div_u64(temp, priv->clk_ptp_rate);
+ priv->default_addend = div_u64(temp, priv->plat->clk_ptp_rate);
priv->hw->ptp->config_addend(priv->ptpaddr,
priv->default_addend);
@@ -644,18 +641,6 @@ static int stmmac_init_ptp(struct stmmac
if (!(priv->dma_cap.time_stamp || priv->dma_cap.atime_stamp))
return -EOPNOTSUPP;
- /* Fall-back to main clock in case of no PTP ref is passed */
- priv->clk_ptp_ref = devm_clk_get(priv->device, "clk_ptp_ref");
- if (IS_ERR(priv->clk_ptp_ref)) {
- priv->clk_ptp_rate = clk_get_rate(priv->stmmac_clk);
- priv->clk_ptp_ref = NULL;
- netdev_dbg(priv->dev, "PTP uses main clock\n");
- } else {
- clk_prepare_enable(priv->clk_ptp_ref);
- priv->clk_ptp_rate = clk_get_rate(priv->clk_ptp_ref);
- netdev_dbg(priv->dev, "PTP rate %d\n", priv->clk_ptp_rate);
- }
-
priv->adv_ts = 0;
/* Check if adv_ts can be enabled for dwmac 4.x core */
if (priv->plat->has_gmac4 && priv->dma_cap.atime_stamp)
@@ -682,8 +667,8 @@ static int stmmac_init_ptp(struct stmmac
static void stmmac_release_ptp(struct stmmac_priv *priv)
{
- if (priv->clk_ptp_ref)
- clk_disable_unprepare(priv->clk_ptp_ref);
+ if (priv->plat->clk_ptp_ref)
+ clk_disable_unprepare(priv->plat->clk_ptp_ref);
stmmac_ptp_unregister(priv);
}
@@ -704,7 +689,7 @@ static void stmmac_adjust_link(struct ne
int new_state = 0;
unsigned int fc = priv->flow_ctrl, pause_time = priv->pause;
- if (phydev == NULL)
+ if (!phydev)
return;
spin_lock_irqsave(&priv->lock, flags);
@@ -731,33 +716,36 @@ static void stmmac_adjust_link(struct ne
new_state = 1;
switch (phydev->speed) {
case 1000:
- if (likely((priv->plat->has_gmac) ||
- (priv->plat->has_gmac4)))
+ if (priv->plat->has_gmac ||
+ priv->plat->has_gmac4)
ctrl &= ~priv->hw->link.port;
- stmmac_hw_fix_mac_speed(priv);
break;
case 100:
+ if (priv->plat->has_gmac ||
+ priv->plat->has_gmac4) {
+ ctrl |= priv->hw->link.port;
+ ctrl |= priv->hw->link.speed;
+ } else {
+ ctrl &= ~priv->hw->link.port;
+ }
+ break;
case 10:
- if (likely((priv->plat->has_gmac) ||
- (priv->plat->has_gmac4))) {
+ if (priv->plat->has_gmac ||
+ priv->plat->has_gmac4) {
ctrl |= priv->hw->link.port;
- if (phydev->speed == SPEED_100) {
- ctrl |= priv->hw->link.speed;
- } else {
- ctrl &= ~(priv->hw->link.speed);
- }
+ ctrl &= ~(priv->hw->link.speed);
} else {
ctrl &= ~priv->hw->link.port;
}
- stmmac_hw_fix_mac_speed(priv);
break;
default:
netif_warn(priv, link, priv->dev,
- "Speed (%d) not 10/100\n",
- phydev->speed);
+ "broken speed: %d\n", phydev->speed);
+ phydev->speed = SPEED_UNKNOWN;
break;
}
-
+ if (phydev->speed != SPEED_UNKNOWN)
+ stmmac_hw_fix_mac_speed(priv);
priv->speed = phydev->speed;
}
@@ -770,8 +758,8 @@ static void stmmac_adjust_link(struct ne
} else if (priv->oldlink) {
new_state = 1;
priv->oldlink = 0;
- priv->speed = 0;
- priv->oldduplex = -1;
+ priv->speed = SPEED_UNKNOWN;
+ priv->oldduplex = DUPLEX_UNKNOWN;
}
if (new_state && netif_msg_link(priv))
@@ -833,8 +821,8 @@ static int stmmac_init_phy(struct net_de
int interface = priv->plat->interface;
int max_speed = priv->plat->max_speed;
priv->oldlink = 0;
- priv->speed = 0;
- priv->oldduplex = -1;
+ priv->speed = SPEED_UNKNOWN;
+ priv->oldduplex = DUPLEX_UNKNOWN;
if (priv->plat->phy_node) {
phydev = of_phy_connect(dev, priv->plat->phy_node,
@@ -886,9 +874,7 @@ static int stmmac_init_phy(struct net_de
if (phydev->is_pseudo_fixed_link)
phydev->irq = PHY_POLL;
- netdev_dbg(priv->dev, "%s: attached to PHY (UID 0x%x) Link = %d\n",
- __func__, phydev->phy_id, phydev->link);
-
+ phy_attached_info(phydev);
return 0;
}
@@ -1014,7 +1000,7 @@ static void stmmac_free_rx_buffers(struc
* @dev: net device structure
* @flags: gfp flag.
* Description: this function initializes the DMA RX/TX descriptors
- * and allocates the socket buffers. It suppors the chained and ring
+ * and allocates the socket buffers. It supports the chained and ring
* modes.
*/
static int init_dma_desc_rings(struct net_device *dev, gfp_t flags)
@@ -1127,13 +1113,6 @@ static void dma_free_tx_skbufs(struct st
int i;
for (i = 0; i < DMA_TX_SIZE; i++) {
- struct dma_desc *p;
-
- if (priv->extend_desc)
- p = &((priv->dma_etx + i)->basic);
- else
- p = priv->dma_tx + i;
-
if (priv->tx_skbuff_dma[i].buf) {
if (priv->tx_skbuff_dma[i].map_as_page)
dma_unmap_page(priv->device,
@@ -1147,7 +1126,7 @@ static void dma_free_tx_skbufs(struct st
DMA_TO_DEVICE);
}
- if (priv->tx_skbuff[i] != NULL) {
+ if (priv->tx_skbuff[i]) {
dev_kfree_skb_any(priv->tx_skbuff[i]);
priv->tx_skbuff[i] = NULL;
priv->tx_skbuff_dma[i].buf = 0;
@@ -1271,6 +1250,28 @@ static void free_dma_desc_resources(stru
}
/**
+ * stmmac_mac_enable_rx_queues - Enable MAC rx queues
+ * @priv: driver private structure
+ * Description: It is used for enabling the rx queues in the MAC
+ */
+static void stmmac_mac_enable_rx_queues(struct stmmac_priv *priv)
+{
+ int rx_count = priv->dma_cap.number_rx_queues;
+ int queue = 0;
+
+ /* If GMAC does not have multiple queues, then this is not necessary*/
+ if (rx_count == 1)
+ return;
+
+ /**
+ * If the core is synthesized with multiple rx queues / multiple
+ * dma channels, then rx queues will be disabled by default.
+ * For now only rx queue 0 is enabled.
+ */
+ priv->hw->mac->rx_queue_enable(priv->hw, queue);
+}
+
+/**
* stmmac_dma_operation_mode - HW DMA operation mode
* @priv: driver private structure
* Description: it is used for configuring the DMA operation mode register in
@@ -1671,10 +1672,6 @@ static int stmmac_hw_setup(struct net_de
/* Copy the MAC addr into the HW */
priv->hw->mac->set_umac_addr(priv->hw, dev->dev_addr, 0);
- /* If required, perform hw setup of the bus. */
- if (priv->plat->bus_setup)
- priv->plat->bus_setup(priv->ioaddr);
-
/* PS and related bits will be programmed according to the speed */
if (priv->hw->pcs) {
int speed = priv->plat->mac_port_sel_speed;
@@ -1691,6 +1688,10 @@ static int stmmac_hw_setup(struct net_de
/* Initialize the MAC Core */
priv->hw->mac->core_init(priv->hw, dev->mtu);
+ /* Initialize MAC RX Queues */
+ if (priv->hw->mac->rx_queue_enable)
+ stmmac_mac_enable_rx_queues(priv);
+
ret = priv->hw->mac->rx_ipc(priv->hw);
if (!ret) {
netdev_warn(priv->dev, "RX IPC Checksum Offload disabled\n");
@@ -1711,8 +1712,10 @@ static int stmmac_hw_setup(struct net_de
if (init_ptp) {
ret = stmmac_init_ptp(priv);
- if (ret)
- netdev_warn(priv->dev, "fail to init PTP.\n");
+ if (ret == -EOPNOTSUPP)
+ netdev_warn(priv->dev, "PTP not supported by HW\n");
+ else if (ret)
+ netdev_warn(priv->dev, "PTP init failed\n");
}
#ifdef CONFIG_DEBUG_FS
@@ -1726,11 +1729,6 @@ static int stmmac_hw_setup(struct net_de
priv->hw->dma->start_tx(priv->ioaddr);
priv->hw->dma->start_rx(priv->ioaddr);
- /* Dump DMA/MAC registers */
- if (netif_msg_hw(priv)) {
- priv->hw->mac->dump_regs(priv->hw);
- priv->hw->dma->dump_regs(priv->ioaddr);
- }
priv->tx_lpi_timer = STMMAC_DEFAULT_TWT_LS;
if ((priv->use_riwt) && (priv->hw->dma->rx_watchdog)) {
@@ -2519,7 +2517,7 @@ static int stmmac_rx(struct stmmac_priv
if (unlikely(status == discard_frame)) {
priv->dev->stats.rx_errors++;
if (priv->hwts_rx_en && !priv->extend_desc) {
- /* DESC2 & DESC3 will be overwitten by device
+ /* DESC2 & DESC3 will be overwritten by device
* with timestamp value, hence reinitialize
* them in stmmac_rx_refill() function so that
* device can reuse it.
@@ -2542,7 +2540,7 @@ static int stmmac_rx(struct stmmac_priv
frame_len = priv->hw->desc->get_rx_frame_len(p, coe);
- /* If frame length is greather than skb buffer size
+ /* If frame length is greater than skb buffer size
* (preallocated during init) then the packet is
* ignored
*/
@@ -2762,7 +2760,7 @@ static netdev_features_t stmmac_fix_feat
/* Some GMAC devices have a bugged Jumbo frame support that
* needs to have the Tx COE disabled for oversized frames
* (due to limited buffer sizes). In this case we disable
- * the TX csum insertionin the TDES and not use SF.
+ * the TX csum insertion in the TDES and not use SF.
*/
if (priv->plat->bugged_jumbo && (dev->mtu > ETH_DATA_LEN))
features &= ~NETIF_F_CSUM_MASK;
@@ -2908,9 +2906,7 @@ static void sysfs_display_ring(void *hea
struct dma_desc *p = (struct dma_desc *)head;
for (i = 0; i < size; i++) {
- u64 x;
if (extend_desc) {
- x = *(u64 *) ep;
seq_printf(seq, "%d [0x%x]: 0x%x 0x%x 0x%x 0x%x\n",
i, (unsigned int)virt_to_phys(ep),
le32_to_cpu(ep->basic.des0),
@@ -2919,7 +2915,6 @@ static void sysfs_display_ring(void *hea
le32_to_cpu(ep->basic.des3));
ep++;
} else {
- x = *(u64 *) p;
seq_printf(seq, "%d [0x%x]: 0x%x 0x%x 0x%x 0x%x\n",
i, (unsigned int)virt_to_phys(ep),
le32_to_cpu(p->des0), le32_to_cpu(p->des1),
@@ -2989,7 +2984,7 @@ static int stmmac_sysfs_dma_cap_read(str
(priv->dma_cap.hash_filter) ? "Y" : "N");
seq_printf(seq, "\tMultiple MAC address registers: %s\n",
(priv->dma_cap.multi_addr) ? "Y" : "N");
- seq_printf(seq, "\tPCS (TBI/SGMII/RTBI PHY interfatces): %s\n",
+ seq_printf(seq, "\tPCS (TBI/SGMII/RTBI PHY interfaces): %s\n",
(priv->dma_cap.pcs) ? "Y" : "N");
seq_printf(seq, "\tSMA (MDIO) Interface: %s\n",
(priv->dma_cap.sma_mdio) ? "Y" : "N");
@@ -3265,44 +3260,8 @@ int stmmac_dvr_probe(struct device *devi
if ((phyaddr >= 0) && (phyaddr <= 31))
priv->plat->phy_addr = phyaddr;
- priv->stmmac_clk = devm_clk_get(priv->device, STMMAC_RESOURCE_NAME);
- if (IS_ERR(priv->stmmac_clk)) {
- netdev_warn(priv->dev, "%s: warning: cannot get CSR clock\n",
- __func__);
- /* If failed to obtain stmmac_clk and specific clk_csr value
- * is NOT passed from the platform, probe fail.
- */
- if (!priv->plat->clk_csr) {
- ret = PTR_ERR(priv->stmmac_clk);
- goto error_clk_get;
- } else {
- priv->stmmac_clk = NULL;
- }
- }
- clk_prepare_enable(priv->stmmac_clk);
-
- priv->pclk = devm_clk_get(priv->device, "pclk");
- if (IS_ERR(priv->pclk)) {
- if (PTR_ERR(priv->pclk) == -EPROBE_DEFER) {
- ret = -EPROBE_DEFER;
- goto error_pclk_get;
- }
- priv->pclk = NULL;
- }
- clk_prepare_enable(priv->pclk);
-
- priv->stmmac_rst = devm_reset_control_get(priv->device,
- STMMAC_RESOURCE_NAME);
- if (IS_ERR(priv->stmmac_rst)) {
- if (PTR_ERR(priv->stmmac_rst) == -EPROBE_DEFER) {
- ret = -EPROBE_DEFER;
- goto error_hw_init;
- }
- dev_info(priv->device, "no reset control found\n");
- priv->stmmac_rst = NULL;
- }
- if (priv->stmmac_rst)
- reset_control_deassert(priv->stmmac_rst);
+ if (priv->plat->stmmac_rst)
+ reset_control_deassert(priv->plat->stmmac_rst);
/* Init MAC and get the capabilities */
ret = stmmac_hw_init(priv);
@@ -3388,10 +3347,6 @@ error_netdev_register:
error_mdio_register:
netif_napi_del(&priv->napi);
error_hw_init:
- clk_disable_unprepare(priv->pclk);
-error_pclk_get:
- clk_disable_unprepare(priv->stmmac_clk);
-error_clk_get:
free_netdev(ndev);
return ret;
@@ -3417,10 +3372,10 @@ int stmmac_dvr_remove(struct device *dev
stmmac_set_mac(priv->ioaddr, false);
netif_carrier_off(ndev);
unregister_netdev(ndev);
- if (priv->stmmac_rst)
- reset_control_assert(priv->stmmac_rst);
- clk_disable_unprepare(priv->pclk);
- clk_disable_unprepare(priv->stmmac_clk);
+ if (priv->plat->stmmac_rst)
+ reset_control_assert(priv->plat->stmmac_rst);
+ clk_disable_unprepare(priv->plat->pclk);
+ clk_disable_unprepare(priv->plat->stmmac_clk);
if (priv->hw->pcs != STMMAC_PCS_RGMII &&
priv->hw->pcs != STMMAC_PCS_TBI &&
priv->hw->pcs != STMMAC_PCS_RTBI)
@@ -3469,14 +3424,14 @@ int stmmac_suspend(struct device *dev)
stmmac_set_mac(priv->ioaddr, false);
pinctrl_pm_select_sleep_state(priv->device);
/* Disable clock in case of PWM is off */
- clk_disable(priv->pclk);
- clk_disable(priv->stmmac_clk);
+ clk_disable(priv->plat->pclk);
+ clk_disable(priv->plat->stmmac_clk);
}
spin_unlock_irqrestore(&priv->lock, flags);
priv->oldlink = 0;
- priv->speed = 0;
- priv->oldduplex = -1;
+ priv->speed = SPEED_UNKNOWN;
+ priv->oldduplex = DUPLEX_UNKNOWN;
return 0;
}
EXPORT_SYMBOL_GPL(stmmac_suspend);
@@ -3509,9 +3464,9 @@ int stmmac_resume(struct device *dev)
priv->irq_wake = 0;
} else {
pinctrl_pm_select_default_state(priv->device);
- /* enable the clk prevously disabled */
- clk_enable(priv->stmmac_clk);
- clk_enable(priv->pclk);
+ /* enable the clk previously disabled */
+ clk_enable(priv->plat->stmmac_clk);
+ clk_enable(priv->plat->pclk);
/* reset the phy so that it's ready */
if (priv->mii)
stmmac_mdio_reset(priv->mii);
--- a/drivers/net/ethernet/stmicro/stmmac/stmmac_mdio.c
+++ b/drivers/net/ethernet/stmicro/stmmac/stmmac_mdio.c
@@ -13,10 +13,6 @@
FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
more details.
- You should have received a copy of the GNU General Public License along with
- this program; if not, write to the Free Software Foundation, Inc.,
- 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
-
The full GNU General Public License is included in this distribution in
the file called "COPYING".
@@ -24,13 +20,14 @@
Maintainer: Giuseppe Cavallaro <peppe.cavallaro@st.com>
*******************************************************************************/
+#include <linux/io.h>
+#include <linux/iopoll.h>
#include <linux/mii.h>
-#include <linux/phy.h>
-#include <linux/slab.h>
#include <linux/of.h>
#include <linux/of_gpio.h>
#include <linux/of_mdio.h>
-#include <asm/io.h>
+#include <linux/phy.h>
+#include <linux/slab.h>
#include "stmmac.h"
@@ -42,22 +39,6 @@
#define MII_GMAC4_WRITE (1 << MII_GMAC4_GOC_SHIFT)
#define MII_GMAC4_READ (3 << MII_GMAC4_GOC_SHIFT)
-static int stmmac_mdio_busy_wait(void __iomem *ioaddr, unsigned int mii_addr)
-{
- unsigned long curr;
- unsigned long finish = jiffies + 3 * HZ;
-
- do {
- curr = jiffies;
- if (readl(ioaddr + mii_addr) & MII_BUSY)
- cpu_relax();
- else
- return 0;
- } while (!time_after_eq(curr, finish));
-
- return -EBUSY;
-}
-
/**
* stmmac_mdio_read
* @bus: points to the mii_bus structure
@@ -74,7 +55,7 @@ static int stmmac_mdio_read(struct mii_b
struct stmmac_priv *priv = netdev_priv(ndev);
unsigned int mii_address = priv->hw->mii.addr;
unsigned int mii_data = priv->hw->mii.data;
-
+ u32 v;
int data;
u32 value = MII_BUSY;
@@ -86,12 +67,14 @@ static int stmmac_mdio_read(struct mii_b
if (priv->plat->has_gmac4)
value |= MII_GMAC4_READ;
- if (stmmac_mdio_busy_wait(priv->ioaddr, mii_address))
+ if (readl_poll_timeout(priv->ioaddr + mii_address, v, !(v & MII_BUSY),
+ 100, 10000))
return -EBUSY;
writel(value, priv->ioaddr + mii_address);
- if (stmmac_mdio_busy_wait(priv->ioaddr, mii_address))
+ if (readl_poll_timeout(priv->ioaddr + mii_address, v, !(v & MII_BUSY),
+ 100, 10000))
return -EBUSY;
/* Read the data from the MII data register */
@@ -115,7 +98,7 @@ static int stmmac_mdio_write(struct mii_
struct stmmac_priv *priv = netdev_priv(ndev);
unsigned int mii_address = priv->hw->mii.addr;
unsigned int mii_data = priv->hw->mii.data;
-
+ u32 v;
u32 value = MII_BUSY;
value |= (phyaddr << priv->hw->mii.addr_shift)
@@ -130,7 +113,8 @@ static int stmmac_mdio_write(struct mii_
value |= MII_WRITE;
/* Wait until any existing MII operation is complete */
- if (stmmac_mdio_busy_wait(priv->ioaddr, mii_address))
+ if (readl_poll_timeout(priv->ioaddr + mii_address, v, !(v & MII_BUSY),
+ 100, 10000))
return -EBUSY;
/* Set the MII address register to write */
@@ -138,7 +122,8 @@ static int stmmac_mdio_write(struct mii_
writel(value, priv->ioaddr + mii_address);
/* Wait until any existing MII operation is complete */
- return stmmac_mdio_busy_wait(priv->ioaddr, mii_address);
+ return readl_poll_timeout(priv->ioaddr + mii_address, v, !(v & MII_BUSY),
+ 100, 10000);
}
/**
@@ -156,9 +141,9 @@ int stmmac_mdio_reset(struct mii_bus *bu
#ifdef CONFIG_OF
if (priv->device->of_node) {
-
if (data->reset_gpio < 0) {
struct device_node *np = priv->device->of_node;
+
if (!np)
return 0;
@@ -198,7 +183,7 @@ int stmmac_mdio_reset(struct mii_bus *bu
/* This is a workaround for problems with the STE101P PHY.
* It doesn't complete its reset until at least one clock cycle
- * on MDC, so perform a dummy mdio read. To be upadted for GMAC4
+ * on MDC, so perform a dummy mdio read. To be updated for GMAC4
* if needed.
*/
if (!priv->plat->has_gmac4)
@@ -225,7 +210,7 @@ int stmmac_mdio_register(struct net_devi
return 0;
new_bus = mdiobus_alloc();
- if (new_bus == NULL)
+ if (!new_bus)
return -ENOMEM;
if (mdio_bus_data->irqs)
@@ -262,49 +247,48 @@ int stmmac_mdio_register(struct net_devi
found = 0;
for (addr = 0; addr < PHY_MAX_ADDR; addr++) {
struct phy_device *phydev = mdiobus_get_phy(new_bus, addr);
- if (phydev) {
- int act = 0;
- char irq_num[4];
- char *irq_str;
-
- /*
- * If an IRQ was provided to be assigned after
- * the bus probe, do it here.
- */
- if ((mdio_bus_data->irqs == NULL) &&
- (mdio_bus_data->probed_phy_irq > 0)) {
- new_bus->irq[addr] =
- mdio_bus_data->probed_phy_irq;
- phydev->irq = mdio_bus_data->probed_phy_irq;
- }
-
- /*
- * If we're going to bind the MAC to this PHY bus,
- * and no PHY number was provided to the MAC,
- * use the one probed here.
- */
- if (priv->plat->phy_addr == -1)
- priv->plat->phy_addr = addr;
-
- act = (priv->plat->phy_addr == addr);
- switch (phydev->irq) {
- case PHY_POLL:
- irq_str = "POLL";
- break;
- case PHY_IGNORE_INTERRUPT:
- irq_str = "IGNORE";
- break;
- default:
- sprintf(irq_num, "%d", phydev->irq);
- irq_str = irq_num;
- break;
- }
- netdev_info(ndev, "PHY ID %08x at %d IRQ %s (%s)%s\n",
- phydev->phy_id, addr,
- irq_str, phydev_name(phydev),
- act ? " active" : "");
- found = 1;
+ int act = 0;
+ char irq_num[4];
+ char *irq_str;
+
+ if (!phydev)
+ continue;
+
+ /*
+ * If an IRQ was provided to be assigned after
+ * the bus probe, do it here.
+ */
+ if (!mdio_bus_data->irqs &&
+ (mdio_bus_data->probed_phy_irq > 0)) {
+ new_bus->irq[addr] = mdio_bus_data->probed_phy_irq;
+ phydev->irq = mdio_bus_data->probed_phy_irq;
+ }
+
+ /*
+ * If we're going to bind the MAC to this PHY bus,
+ * and no PHY number was provided to the MAC,
+ * use the one probed here.
+ */
+ if (priv->plat->phy_addr == -1)
+ priv->plat->phy_addr = addr;
+
+ act = (priv->plat->phy_addr == addr);
+ switch (phydev->irq) {
+ case PHY_POLL:
+ irq_str = "POLL";
+ break;
+ case PHY_IGNORE_INTERRUPT:
+ irq_str = "IGNORE";
+ break;
+ default:
+ sprintf(irq_num, "%d", phydev->irq);
+ irq_str = irq_num;
+ break;
}
+ netdev_info(ndev, "PHY ID %08x at %d IRQ %s (%s)%s\n",
+ phydev->phy_id, addr, irq_str, phydev_name(phydev),
+ act ? " active" : "");
+ found = 1;
}
if (!found && !mdio_node) {
--- a/drivers/net/ethernet/stmicro/stmmac/stmmac_pci.c
+++ b/drivers/net/ethernet/stmicro/stmmac/stmmac_pci.c
@@ -12,10 +12,6 @@
FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
more details.
- You should have received a copy of the GNU General Public License along with
- this program; if not, write to the Free Software Foundation, Inc.,
- 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
-
The full GNU General Public License is included in this distribution in
the file called "COPYING".
--- a/drivers/net/ethernet/stmicro/stmmac/stmmac_platform.c
+++ b/drivers/net/ethernet/stmicro/stmmac/stmmac_platform.c
@@ -12,10 +12,6 @@
FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
more details.
- You should have received a copy of the GNU General Public License along with
- this program; if not, write to the Free Software Foundation, Inc.,
- 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
-
The full GNU General Public License is included in this distribution in
the file called "COPYING".
@@ -121,7 +117,6 @@ static struct stmmac_axi *stmmac_axi_set
axi->axi_lpi_en = of_property_read_bool(np, "snps,lpi_en");
axi->axi_xit_frm = of_property_read_bool(np, "snps,xit_frm");
axi->axi_kbbe = of_property_read_bool(np, "snps,axi_kbbe");
- axi->axi_axi_all = of_property_read_bool(np, "snps,axi_all");
axi->axi_fb = of_property_read_bool(np, "snps,axi_fb");
axi->axi_mb = of_property_read_bool(np, "snps,axi_mb");
axi->axi_rb = of_property_read_bool(np, "snps,axi_rb");
@@ -181,10 +176,19 @@ static int stmmac_dt_phy(struct plat_stm
mdio = false;
}
- /* If snps,dwmac-mdio is passed from DT, always register the MDIO */
- for_each_child_of_node(np, plat->mdio_node) {
- if (of_device_is_compatible(plat->mdio_node, "snps,dwmac-mdio"))
- break;
+ /* exception for dwmac-dwc-qos-eth glue logic */
+ if (of_device_is_compatible(np, "snps,dwc-qos-ethernet-4.10")) {
+ plat->mdio_node = of_get_child_by_name(np, "mdio");
+ } else {
+ /**
+ * If snps,dwmac-mdio is passed from DT, always register
+ * the MDIO
+ */
+ for_each_child_of_node(np, plat->mdio_node) {
+ if (of_device_is_compatible(plat->mdio_node,
+ "snps,dwmac-mdio"))
+ break;
+ }
}
if (plat->mdio_node) {
@@ -249,6 +253,9 @@ stmmac_probe_config_dt(struct platform_d
plat->force_sf_dma_mode =
of_property_read_bool(np, "snps,force_sf_dma_mode");
+ plat->en_tx_lpi_clockgating =
+ of_property_read_bool(np, "snps,en-tx-lpi-clockgating");
+
/* Set the maxmtu to a default of JUMBO_LEN in case the
* parameter is not present in the device tree.
*/
@@ -333,7 +340,54 @@ stmmac_probe_config_dt(struct platform_d
plat->axi = stmmac_axi_setup(pdev);
+ /* clock setup */
+ plat->stmmac_clk = devm_clk_get(&pdev->dev,
+ STMMAC_RESOURCE_NAME);
+ if (IS_ERR(plat->stmmac_clk)) {
+ dev_warn(&pdev->dev, "Cannot get CSR clock\n");
+ plat->stmmac_clk = NULL;
+ }
+ clk_prepare_enable(plat->stmmac_clk);
+
+ plat->pclk = devm_clk_get(&pdev->dev, "pclk");
+ if (IS_ERR(plat->pclk)) {
+ if (PTR_ERR(plat->pclk) == -EPROBE_DEFER)
+ goto error_pclk_get;
+
+ plat->pclk = NULL;
+ }
+ clk_prepare_enable(plat->pclk);
+
+ /* Fall-back to main clock in case of no PTP ref is passed */
+ plat->clk_ptp_ref = devm_clk_get(&pdev->dev, "clk_ptp_ref");
+ if (IS_ERR(plat->clk_ptp_ref)) {
+ plat->clk_ptp_rate = clk_get_rate(plat->stmmac_clk);
+ plat->clk_ptp_ref = NULL;
+ dev_warn(&pdev->dev, "PTP uses main clock\n");
+ } else {
+ clk_prepare_enable(plat->clk_ptp_ref);
+ plat->clk_ptp_rate = clk_get_rate(plat->clk_ptp_ref);
+ dev_dbg(&pdev->dev, "PTP rate %d\n", plat->clk_ptp_rate);
+ }
+
+ plat->stmmac_rst = devm_reset_control_get(&pdev->dev,
+ STMMAC_RESOURCE_NAME);
+ if (IS_ERR(plat->stmmac_rst)) {
+ if (PTR_ERR(plat->stmmac_rst) == -EPROBE_DEFER)
+ goto error_hw_init;
+
+ dev_info(&pdev->dev, "no reset control found\n");
+ plat->stmmac_rst = NULL;
+ }
+
return plat;
+
+error_hw_init:
+ clk_disable_unprepare(plat->pclk);
+error_pclk_get:
+ clk_disable_unprepare(plat->stmmac_clk);
+
+ return ERR_PTR(-EPROBE_DEFER);
}
/**
@@ -357,7 +411,7 @@ void stmmac_remove_config_dt(struct plat
struct plat_stmmacenet_data *
stmmac_probe_config_dt(struct platform_device *pdev, const char **mac)
{
- return ERR_PTR(-ENOSYS);
+ return ERR_PTR(-EINVAL);
}
void stmmac_remove_config_dt(struct platform_device *pdev,
--- a/drivers/net/ethernet/stmicro/stmmac/stmmac_ptp.c
+++ b/drivers/net/ethernet/stmicro/stmmac/stmmac_ptp.c
@@ -12,10 +12,6 @@
FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
more details.
- You should have received a copy of the GNU General Public License along with
- this program; if not, write to the Free Software Foundation, Inc.,
- 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
-
The full GNU General Public License is included in this distribution in
the file called "COPYING".
--- a/drivers/net/ethernet/stmicro/stmmac/stmmac_ptp.h
+++ b/drivers/net/ethernet/stmicro/stmmac/stmmac_ptp.h
@@ -12,10 +12,6 @@
FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
more details.
- You should have received a copy of the GNU General Public License along with
- this program; if not, write to the Free Software Foundation, Inc.,
- 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
-
The full GNU General Public License is included in this distribution in
the file called "COPYING".
--- a/include/linux/stmmac.h
+++ b/include/linux/stmmac.h
@@ -103,7 +103,6 @@ struct stmmac_axi {
u32 axi_wr_osr_lmt;
u32 axi_rd_osr_lmt;
bool axi_kbbe;
- bool axi_axi_all;
u32 axi_blen[AXI_BLEN];
bool axi_fb;
bool axi_mb;
@@ -135,13 +134,18 @@ struct plat_stmmacenet_data {
int tx_fifo_size;
int rx_fifo_size;
void (*fix_mac_speed)(void *priv, unsigned int speed);
- void (*bus_setup)(void __iomem *ioaddr);
int (*init)(struct platform_device *pdev, void *priv);
void (*exit)(struct platform_device *pdev, void *priv);
void *bsp_priv;
+ struct clk *stmmac_clk;
+ struct clk *pclk;
+ struct clk *clk_ptp_ref;
+ unsigned int clk_ptp_rate;
+ struct reset_control *stmmac_rst;
struct stmmac_axi *axi;
int has_gmac4;
bool tso_en;
int mac_port_sel_speed;
+ bool en_tx_lpi_clockgating;
};
#endif
Reference in New Issue View Git Blame Copy Permalink