mirror of
https://github.com/openwrt/openwrt.git
synced 2024-12-28 01:28:59 +00:00
15a14cf166
The QorIQ LS1012A processor, optimized for battery-backed or USB-powered, integrates a single ARM Cortex-A53 core with a hardware packet forwarding engine and high-speed interfaces to deliver line-rate networking performance. QorIQ LS1012A Reference Design System (LS1012ARDB) is a high-performance development platform, with a complete debugging environment. The LS1012ARDB board supports the QorIQ LS1012A processor and is optimized to support the high-bandwidth DDR3L memory and a full complement of high-speed SerDes ports. LEDE/OPENWRT will auto strip executable program file while make. So we need select CONFIG_NO_STRIP=y while make menuconfig to avoid the ppfe network fiemware be destroyed, then run make to build ls1012ardb firmware. The fsl-quadspi flash with jffs2 fs is unstable and arise some failed message. This issue have noticed the IP owner for investigate, hope he can solve it earlier. So the ls1012ardb now also provide a xx-firmware.ext4.bin as default firmware, and the uboot bootcmd will run wrtboot_ext4rfs for "rootfstype=ext4" bootargs. Signed-off-by: Yutang Jiang <yutang.jiang@nxp.com>
43 lines
1.6 KiB
Diff
43 lines
1.6 KiB
Diff
From d3a8ee41170ff9e5298ff354c77ff99439dfe2bf Mon Sep 17 00:00:00 2001
|
|
From: Yunhui Cui <yunhui.cui@nxp.com>
|
|
Date: Thu, 10 Mar 2016 11:33:40 +0800
|
|
Subject: [PATCH 108/113] mtd: fsl-quadspi: add multi flash chip R/W on
|
|
ls2080a
|
|
|
|
There is a hardware feature that qspi_amba_base is added
|
|
internally by SOC design on ls2080a. so memmap_phy need not
|
|
be added in driver. If memmap_phy is added, the flash A1
|
|
addr space is [0, memmap_phy] which far more than flash size.
|
|
The AMBA memory will be divided into four parts and assign to
|
|
every chipselect. Every channel will has two valid chipselects.
|
|
|
|
Signed-off-by: Yunhui Cui <yunhui.cui@nxp.com>
|
|
---
|
|
drivers/mtd/spi-nor/fsl-quadspi.c | 14 ++++++++++----
|
|
1 file changed, 10 insertions(+), 4 deletions(-)
|
|
|
|
--- a/drivers/mtd/spi-nor/fsl-quadspi.c
|
|
+++ b/drivers/mtd/spi-nor/fsl-quadspi.c
|
|
@@ -744,11 +744,17 @@ static void fsl_qspi_set_map_addr(struct
|
|
{
|
|
int nor_size = q->nor_size;
|
|
void __iomem *base = q->iobase;
|
|
+ u32 mem_base;
|
|
|
|
- qspi_writel(q, nor_size + q->memmap_phy, base + QUADSPI_SFA1AD);
|
|
- qspi_writel(q, nor_size * 2 + q->memmap_phy, base + QUADSPI_SFA2AD);
|
|
- qspi_writel(q, nor_size * 3 + q->memmap_phy, base + QUADSPI_SFB1AD);
|
|
- qspi_writel(q, nor_size * 4 + q->memmap_phy, base + QUADSPI_SFB2AD);
|
|
+ if (has_added_amba_base_internal(q))
|
|
+ mem_base = 0x0;
|
|
+ else
|
|
+ mem_base = q->memmap_phy;
|
|
+
|
|
+ qspi_writel(q, nor_size + mem_base, base + QUADSPI_SFA1AD);
|
|
+ qspi_writel(q, nor_size * 2 + mem_base, base + QUADSPI_SFA2AD);
|
|
+ qspi_writel(q, nor_size * 3 + mem_base, base + QUADSPI_SFB1AD);
|
|
+ qspi_writel(q, nor_size * 4 + mem_base, base + QUADSPI_SFB2AD);
|
|
}
|
|
|
|
/*
|