openwrt/target/linux/ramips/image
Edmunt Pienkowsky 9786b53efb ramips: fix Youku-YK1 support
Remove the ephy-pins from the ethernet device tree node. The ephy-pins
are useed to controll the ePHY LEDs and this board doesn't have these.
Instead one of the ePHY pins is used in GPIO mode to control the WAN
LED.

Use the switch LED trigger to control the WAN LED. Move the power LED
handling to diag.sh to show the boot status via this LED.

Add the missing kernel packages for USB and microSD card reader to the
default package selection.

Fix the maximum image size value. The board has a 32MByte flash chip.

Fixes: FS#1055

Signed-off-by: Edmunt Pienkowsky <roed@onet.eu>
[make the commit message more verbose, remove GPIO pinmux for pins not
used as GPIOs]
Signed-off-by: Mathias Kresin <dev@kresin.me>
2017-10-27 11:19:38 +02:00
..
lzma-loader ramips: lzma-loader: fix O32 ABI conformance 2016-03-21 13:15:29 +00:00
Makefile ramips: merge mt7628/mt7688 into mt76x8 2017-08-30 17:05:10 +02:00
mt76x8.mk ramips/mt76x8: add initramfs support for tplink 841n v13 2017-10-09 17:34:41 +02:00
mt7620.mk ramips: fix Youku-YK1 support 2017-10-27 11:19:38 +02:00
mt7621.mk ramips: improve Xiaomi Mi Router 3G support 2017-09-28 09:20:36 +02:00
rt288x.mk ramips: fix AR670W partition alignment 2017-02-09 09:14:45 +01:00
rt305x-legacy.mk ramips: use new image build code for more devices 2016-12-24 10:03:38 +01:00
rt305x.mk ramips: cleanup AsiaRF AWM002 eval board support 2017-08-03 00:11:25 +02:00
rt3883.mk ramips: add support for Loewe WMDR-143N 2017-07-27 09:13:27 +02:00