mirror of
https://github.com/openwrt/openwrt.git
synced 2024-12-26 00:41:17 +00:00
649bc715b2
Radxa ROCK Pi E v3.0 is a compact networking SBC[1] using the Rockchip RK3328 SoC. Hardware -------- - Rockchip RK3328 SoC - Quad A53 CPU - 512MB/1GB/2GB DDR4 RAM - 4/8/16/32GB eMMC - Micro SD Card slot - WiFi 4 and BT 4, or WiFi 5 and BT 5 (not supported yet) - 1x 1000M Ethernet with PoE support (additional PoE HAT required) - 1x 100M Ethernet - 1x USB 3.0 Type-A port (Host) - 1x 4-ring 3.5mm headphone jack - 40 Pin GPIO header [1] https://radxa.com/products/rockpi/pie Installation ------------ Uncompress the OpenWrt sysupgrade and write it to a micro SD card or internal eMMC using dd. Signed-off-by: FUKAUMI Naoki <naoki@radxa.com> Link: https://github.com/openwrt/openwrt/pull/15984 Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
28 lines
614 B
Diff
28 lines
614 B
Diff
--- a/arch/arm64/boot/dts/rockchip/rk3328-rock-pi-e.dts
|
|
+++ b/arch/arm64/boot/dts/rockchip/rk3328-rock-pi-e.dts
|
|
@@ -23,6 +23,10 @@
|
|
aliases {
|
|
mmc0 = &sdmmc;
|
|
mmc1 = &emmc;
|
|
+ led-boot = &led_blue;
|
|
+ led-failsafe = &led_blue;
|
|
+ led-running = &led_blue;
|
|
+ led-upgrade = &led_blue;
|
|
};
|
|
|
|
chosen {
|
|
@@ -55,10 +59,11 @@
|
|
pinctrl-0 = <&led_pin>;
|
|
pinctrl-names = "default";
|
|
|
|
- led-0 {
|
|
+ led_blue: led-0 {
|
|
color = <LED_COLOR_ID_BLUE>;
|
|
+ default-state = "on";
|
|
+ function = LED_FUNCTION_HEARTBEAT;
|
|
gpios = <&gpio3 RK_PA5 GPIO_ACTIVE_LOW>;
|
|
- linux,default-trigger = "heartbeat";
|
|
};
|
|
};
|
|
|