openwrt/target/linux/ramips/dts/mt7620n_zbtlink_zbt-cpe102.dts
Sungbo Eo 22a21b0c18 ramips: use hex notation for *-mtd-eeprom property
Change "0" to "0x0" for consistency. This is an extension of commit 34abfb6e91
("ramips: convert mediatek,mtd-eeprom from decimal to hex notation").

Signed-off-by: Sungbo Eo <mans0n@gorani.run>
2020-05-08 18:34:27 +02:00

126 lines
1.8 KiB
Plaintext

/dts-v1/;
#include "mt7620n.dtsi"
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/input/input.h>
/ {
compatible = "zbtlink,zbt-cpe102", "ralink,mt7620n-soc";
model = "Zbtlink ZBT-CPE102";
chosen {
bootargs = "console=ttyS0,115200";
};
aliases {
led-boot = &led_4g_0;
led-failsafe = &led_4g_0;
};
leds {
compatible = "gpio-leds";
led_4g_0: 4g-0 {
label = "zbt-cpe102:green:4g-0";
gpios = <&gpio1 14 GPIO_ACTIVE_LOW>;
};
4g-1 {
label = "zbt-cpe102:green:4g-1";
gpios = <&gpio0 2 GPIO_ACTIVE_LOW>;
};
4g-2 {
label = "zbt-cpe102:green:4g-2";
gpios = <&gpio1 15 GPIO_ACTIVE_LOW>;
};
};
keys {
compatible = "gpio-keys";
reset {
label = "reset";
gpios = <&gpio0 1 GPIO_ACTIVE_LOW>;
linux,code = <KEY_RESTART>;
};
};
};
&gpio1 {
status = "okay";
};
&gpio2 {
status = "okay";
};
&gpio3 {
status = "okay";
};
&spi0 {
status = "okay";
en25q64@0 {
compatible = "jedec,spi-nor";
reg = <0>;
spi-max-frequency = <10000000>;
partitions {
compatible = "fixed-partitions";
#address-cells = <1>;
#size-cells = <1>;
partition@0 {
label = "u-boot";
reg = <0x0 0x30000>;
read-only;
};
partition@30000 {
label = "u-boot-env";
reg = <0x30000 0x10000>;
read-only;
};
factory: partition@40000 {
label = "factory";
reg = <0x40000 0x10000>;
read-only;
};
partition@50000 {
compatible = "denx,uimage";
label = "firmware";
reg = <0x50000 0x760000>;
};
};
};
};
&ehci {
status = "okay";
};
&ohci {
status = "okay";
};
&ethernet {
mtd-mac-address = <&factory 0x4>;
mediatek,portmap = "wllll";
};
&wmac {
ralink,mtd-eeprom = <&factory 0x0>;
};
&state_default {
default {
groups = "i2c", "spi refclk", "wled";
function = "gpio";
};
};