openwrt/package/boot
Tianling Shen d3c193525e mediatek: add CMCC RAX3000M support
Hardware specification:
  SoC: MediaTek MT7981B 2x A53
  Flash: 64GB eMMC or 128 MB SPI-NAND
  RAM: 512MB
  Ethernet: 4x 10/100/1000 Mbps
  Switch: MediaTek MT7531AE
  WiFi: MediaTek MT7976C
  Button: Reset, Mesh
  Power: DC 12V 1A
- UART: 3.3v, 115200n8
  --------------------------
  |         Layout         |
  |   -----------------    |
  | 4 | GND TX VCC RX | <= |
  |   -----------------    |
  --------------------------

Gain SSH access:
1. Login into web interface, and download the configuration.
2. Enter fakeroot, decompress the configuration:
   tar -zxf cfg_export_config_file.conf
3. Edit 'etc/config/dropbear', set 'enable' to '1'.
4. Edit 'etc/shadow', update (remove) root password:
   'root::19523:0:99999:7:::'
5. Repack 'etc' directory:
   tar -zcf cfg_export_config_file.conf etc/
   * If you find an error about 'etc/wireless/mediatek/DBDC_card0.dat',
     just ignore it.
6. Upload new configuration via web interface, now you can SSH to RAX3000M.

Check stroage type:
Check the label on the back of the device:
"CH EC CMIIT ID: xxxx" is eMMC version
"CH    CMIIT ID: xxxx" is NAND version

eMMC Flash instructions:
1. SSH to RAX3000M, and backup everything, especially 'factory' part.
   ('data' partition can be ignored, it's useless.)
2. Write new GPT table:
   dd if=openwrt-mediatek-filogic-cmcc_rax3000m-emmc-gpt.bin of=/dev/mmcblk0 bs=512 seek=0 count=34 conv=fsync
3. Erase and write new BL2:
   echo 0 > /sys/block/mmcblk0boot0/force_ro
   dd if=/dev/zero of=/dev/mmcblk0boot0 bs=512 count=8192 conv=fsync
   dd if=openwrt-mediatek-filogic-cmcc_rax3000m-emmc-preloader.bin of=/dev/mmcblk0boot0 bs=512 conv=fsync
4. Erase and write new FIP:
   dd if=/dev/zero of=/dev/mmcblk0 bs=512 seek=13312 count=8192 conv=fsync
   dd if=openwrt-mediatek-filogic-cmcc_rax3000m-emmc-bl31-uboot.fip of=/dev/mmcblk0 bs=512 seek=13312 conv=fsync
5. Set static IP on your PC:
   IP 192.168.1.254, GW 192.168.1.1
6. Serve OpenWrt initramfs image using TFTP server.
7. Cut off the power and re-engage, wait for TFTP recovery to complete.
8. After OpenWrt has booted, perform sysupgrade.
9. Additionally, if you want to have eMMC recovery boot feature:
     (Don't worry! You will always have TFTP recovery boot feature.)
   dd if=openwrt-mediatek-filogic-cmcc_rax3000m-initramfs-recovery.itb of=/dev/mmcblk0p4 bs=512 conv=fsync

NAND Flash instructions:
1. SSH to RAX3000M, and backup everything, especially 'Factory' part.
2. Erase and write new BL2:
   mtd erase BL2
   mtd write openwrt-mediatek-filogic-cmcc_rax3000m-nand-preloader.bin BL2
3. Erase and write new FIP:
   mtd erase FIP
   mtd write openwrt-mediatek-filogic-cmcc_rax3000m-nand-bl31-uboot.fip FIP
4. Set static IP on your PC:
   IP 192.168.1.254, GW 192.168.1.1
5. Serve OpenWrt initramfs image using TFTP server.
6. Cut off the power and re-engage, wait for TFTP recovery to complete.
7. After OpenWrt has booted, erase UBI volumes:
   ubidetach -p /dev/mtd0
   ubiformat -y /dev/mtd0
   ubiattach -p /dev/mtd0
8. Create new ubootenv volumes:
   ubimkvol /dev/ubi0 -n 0 -N ubootenv -s 128KiB
   ubimkvol /dev/ubi0 -n 1 -N ubootenv2 -s 128KiB
9. Additionally, if you want to have NAND recovery boot feature:
     (Don't worry! You will always have TFTP recovery boot feature.)
   ubimkvol /dev/ubi0 -n 2 -N recovery -s 20MiB
   ubiupdatevol /dev/ubi0_2 openwrt-mediatek-filogic-cmcc_rax3000m-initramfs-recovery.itb
10. Perform sysupgrade.

Signed-off-by: Tianling Shen <cnsztl@immortalwrt.org>
(cherry picked from commit 423186d7d8)
[rebased to 23.05]
Signed-off-by: Tianling Shen <cnsztl@immortalwrt.org>
2023-11-07 00:46:00 +01:00
..
arm-trusted-firmware-bcm63xx treewide: replace AUTORELEASE with real PKG_RELEASE 2023-05-18 11:35:29 +02:00
arm-trusted-firmware-mediatek arm-trusted-firmware-mediatek: add emmc/spim-nand ddr4 build for mt7981 2023-11-07 00:43:33 +01:00
arm-trusted-firmware-mvebu treewide: replace AUTORELEASE with real PKG_RELEASE 2023-05-18 11:35:29 +02:00
arm-trusted-firmware-rockchip atf-rockchip: update to 2.3 2020-07-28 15:52:44 +02:00
arm-trusted-firmware-sunxi arm-trusted-firmware-sunxi: bump to 2.8 2023-04-01 01:22:19 +03:00
arm-trusted-firmware-tools arm-trusted-firmware-tools: fix build on macOS/Darwin 2023-08-13 16:29:58 +01:00
at91bootstrap treewide: Add extra CPE identifier 2023-09-27 22:37:13 +02:00
fconfig treewide: unify OpenWrt hosted source via @OPENWRT 2021-02-05 12:00:24 -10:00
grub2 grub2: change armvirt reference to armsr 2023-06-13 14:14:31 +02:00
imx-bootlets imx-bootlets: refresh patches 2021-02-24 16:15:02 +01:00
kexec-tools treewide: add support for "gc-sections" in PKG_BUILD_FLAGS 2023-03-21 18:28:22 +01:00
kobs-ng kobs-ng: update dependencies after 'imx6' -> 'imx' rename 2021-11-03 12:45:40 +01:00
mt7623n-preloader mt7623n-preloader: remove mt7622-preloader 2021-02-28 04:12:23 +00:00
opensbi opensbi: add package for RISC-V 2023-06-14 09:22:08 +02:00
tfa-layerscape tfa-layerscape: fix fiptool's build 2023-05-20 23:20:48 +02:00
uboot-armsr uboot-armsr: add support for QEMU armv7/armv8 2023-06-13 14:15:22 +02:00
uboot-at91 treewide: replace AUTORELEASE with real PKG_RELEASE 2023-05-18 11:35:29 +02:00
uboot-bcm4908 treewide: replace AUTORELEASE with real PKG_RELEASE 2023-05-18 11:35:29 +02:00
uboot-envtools mediatek: add CMCC RAX3000M support 2023-11-07 00:46:00 +01:00
uboot-fritz4040 treewide: replace AUTORELEASE with real PKG_RELEASE 2023-05-18 11:35:29 +02:00
uboot-imx treewide: replace AUTORELEASE with real PKG_RELEASE 2023-05-18 11:35:29 +02:00
uboot-kirkwood treewide: replace AUTORELEASE with real PKG_RELEASE 2023-05-18 11:35:29 +02:00
uboot-lantiq treewide: replace AUTORELEASE with real PKG_RELEASE 2023-05-18 11:35:29 +02:00
uboot-layerscape package: layerscape: change loadaddr address 2023-05-29 14:17:52 +02:00
uboot-mediatek uboot-mediatek: add support for CMCC RAX3000M 2023-11-07 00:45:43 +01:00
uboot-mvebu uboot-mvebu: update to version 2023.07.02 2023-07-30 18:06:28 +02:00
uboot-mxs mxs: rework image generation 2023-07-06 17:04:13 +02:00
uboot-omap treewide: replace AUTORELEASE with real PKG_RELEASE 2023-05-18 11:35:29 +02:00
uboot-oxnas treewide: replace AUTORELEASE with real PKG_RELEASE 2023-05-18 11:35:29 +02:00
uboot-rockchip uboot-rockchip: add Orange Pi R1 Plus LTS support 2023-06-09 13:15:19 +02:00
uboot-sifiveu uboot-sifiveu: add bootloader package for SiFive Ux40 boards 2023-06-14 09:22:08 +02:00
uboot-sunxi uboot-sunxi: update support for FriendlyARM ZeroPI 2023-04-10 13:50:58 +02:00
uboot-tegra treewide: replace AUTORELEASE with real PKG_RELEASE 2023-05-18 11:35:29 +02:00
uboot-zynq uboot-zynq: build with zynq generic subtarget 2022-12-25 11:55:53 +01:00