ExternalVendorCode/openwrt
1
0
Fork 0
mirror of https://github.com/openwrt/openwrt.git synced 2025-02-01 16:58:22 +00:00
Code Issues Actions 6 Packages Projects Releases Wiki Activity
openwrt/target/linux/ramips/image/mt76x8.mk
Maxim Anisimov 86e7353bff ramips: add support for TP-Link Archer C20 v5 
TP-Link Archer C20 v5 is a router with 5-port FE switch and
non-detachable antennas. It's based on MediaTek MT7628N+MT7610EN.

Specification:
- MediaTek MT7628N/N (580 Mhz)
- 64 MB of RAM
- 8 MB of FLASH
- 2T2R 2.4 GHz and 1T1R 5 GHz
- 5x 10/100 Mbps Ethernet
- 3x external, non-detachable antennas
- UART (J1) header on PCB (115200 8n1)
- 7x LED (GPIO-controlled*), 2x button, power input switch

* WAN LED in this devices is a dual-color, dual-leads type which isn't
  (fully) supported by gpio-leds driver. This type of LED requires both
  GPIOs state change at the same time to select color or turn it off.
  For now, we support/use only the green part of the LED.

Create Factory image
--------------------
As all installation methods require a U-Boot to be integrated into the
Image (and we do not ship one with the image) we are not able to create
an image in the OpenWRT build-process.

Download a TP-Link image from their Website and a OpenWRT sysupgrade
image for the device and build yourself a factory image like following:

TP-Link image:             tpl.bin
OpenWRT sysupgrade image:  owrt.bin

 > dd if=tpl.bin of=boot.bin bs=131584 count=1
 > cat owrt.bin >> boot.bin

Installing via Web-UI
---------------------
Upload the boot.bin via TP-Links firmware upgrade tool in the
web-interface.

Installing via Recovery
-----------------------
Activate Web-Recovery by beginning the upgrade Process with a
Firmware-Image from TP-Link. After starting the Firmware Upgrade,
wait ~3 seconds (When update status is switching to 0%), then
disconnect the power supply from the device. Upgrade flag (which
activates Web-Recovery) is written before the OS-image is touched and
removed after write is succesfull, so this procedure should be safe.

Plug the power back in. It will come up in Recovery-Mode on 192.168.0.1.
When active, all LEDs but the WPS LED are off.
Remeber to assign yourself a static IP-address as DHCP is not active in
this mode.

The boot.bin can now be uploaded and flashed using the web-recovery.

Installing via TFTP
-------------------
Prepare an image like following (Filenames from factory image steps
apply here)

 > dd if=/dev/zero of=tp_recovery.bin bs=196608 count=1
 > dd if=tpl.bin of=tmp.bin bs=131584 count=1
 > dd if=tmp.bin of=boot.bin bs=512 skip=1
 > cat boot.bin >> tp_recovery.bin
 > cat owrt.bin >> tp_recovery.bin

Place tp_recovery.bin in root directory of TFTP server and listen on
192.168.0.66/24.

Connect router LAN ports with your computer and power up the router
while pressing the reset button. The router will download the image via
tftp and after ~1 Minute reboot into OpenWRT.

U-Boot CLI
----------
U-Boot CLI can be activated by holding down '4' on bootup.

Dual U-Boot
-----------
This is TP-Link MediaTek device with a split-uboot feature design like
a TP-Link Archer C50 v4. The first (factory-uboot) provides recovery via
TFTP and HTTP, jumping straight into the second (firmware-uboot) if no
recovery needs to be performed. The firmware-uboot unpacks and executed
the kernel.

Web-Recovery
------------
TP-Link integrated a new Web-Recovery like the one on the Archer C7v4 /
TL-WR1043v5 / Archer C50v4. Stock-firmware sets a flag in the "romfile"
partition before beginning to write and removes it afterwards. If the
router boots with this flag set, bootloader will automatically start
Web-recovery and listens on 192.168.0.1. This way, the vendor-firmware
or an OpenWRT factory image can be written.

By doing the same while performing sysupgrade, we can take advantage of
the Web-recovery in OpenWRT.

It is important to note that Web-Recovery is only based on this flag. It
can't detect e.g. a crashing kernel or other means. Once activated it
won't boot the OS before a recovery action (either via TFTP or HTTP) is
performed. This recovery-mode is indicated by an illuminated WPS-LED on
boot.

Signed-off-by: Maxim Anisimov <maxim.anisimov.ua@gmail.com>
[adjust some node names for LEDs in DTS]
Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
2020-01-09 17:33:57 +01:00

617 lines
15 KiB
Makefile
Raw Blame History

#
# MT76x8 Profiles
#
define Device/alfa-network_awusfree1
SOC := mt7628an
IMAGE_SIZE := 7872k
DEVICE_VENDOR := ALFA Network
DEVICE_MODEL := AWUSFREE1
DEVICE_PACKAGES := uboot-envtools
endef
TARGET_DEVICES += alfa-network_awusfree1
define Device/buffalo_wcr-1166ds
SOC := mt7628an
IMAGE_SIZE := 7936k
BUFFALO_TAG_PLATFORM := MTK
BUFFALO_TAG_VERSION := 9.99
BUFFALO_TAG_MINOR := 9.99
IMAGES += factory.bin
IMAGE/sysupgrade.bin := trx | pad-rootfs | append-metadata
IMAGE/factory.bin := trx -M 0x746f435c | pad-rootfs | append-metadata | \
buffalo-enc WCR-1166DS $$(BUFFALO_TAG_VERSION) -l | \
buffalo-tag-dhp WCR-1166DS JP JP | buffalo-enc-tag -l | buffalo-dhp-image
DEVICE_VENDOR := Buffalo
DEVICE_MODEL := WCR-1166DS
DEVICE_PACKAGES := kmod-mt76x2
SUPPORTED_DEVICES += wcr-1166ds
endef
TARGET_DEVICES += buffalo_wcr-1166ds
define Device/cudy_wr1000
SOC := mt7628an
IMAGE_SIZE := 7872k
IMAGES += factory.bin
IMAGE/factory.bin := $$(sysupgrade_bin) | check-size $$$$(IMAGE_SIZE) | \
jcg-header 92.122
JCG_MAXSIZE := 7872k
DEVICE_VENDOR := Cudy
DEVICE_MODEL := WR1000
DEVICE_PACKAGES := kmod-mt76x2
SUPPORTED_DEVICES += wr1000
endef
TARGET_DEVICES += cudy_wr1000
define Device/d-team_pbr-d1
SOC := mt7628an
IMAGE_SIZE := 16064k
DEVICE_VENDOR := PandoraBox
DEVICE_MODEL := PBR-D1
DEVICE_PACKAGES := kmod-usb2 kmod-usb-ohci
SUPPORTED_DEVICES += pbr-d1
endef
TARGET_DEVICES += d-team_pbr-d1
define Device/duzun_dm06
SOC := mt7628an
IMAGE_SIZE := 7872k
DEVICE_VENDOR := DuZun
DEVICE_MODEL := DM06
DEVICE_PACKAGES := kmod-usb2 kmod-usb-ohci kmod-usb-ledtrig-usbport
SUPPORTED_DEVICES += duzun-dm06
endef
TARGET_DEVICES += duzun_dm06
define Device/glinet_gl-mt300n-v2
SOC := mt7628an
IMAGE_SIZE := 16064k
DEVICE_VENDOR := GL.iNet
DEVICE_MODEL := GL-MT300N
DEVICE_VARIANT := V2
DEVICE_PACKAGES := kmod-usb2 kmod-usb-ohci
SUPPORTED_DEVICES += gl-mt300n-v2
endef
TARGET_DEVICES += glinet_gl-mt300n-v2
define Device/glinet_vixmini
SOC := mt7628an
IMAGE_SIZE := 7872k
DEVICE_VENDOR := GL.iNet
DEVICE_MODEL := VIXMINI
SUPPORTED_DEVICES += vixmini
endef
TARGET_DEVICES += glinet_vixmini
define Device/hilink_hlk-7628n
SOC := mt7628an
IMAGE_SIZE := 32448k
DEVICE_VENDOR := HILINK
DEVICE_MODEL := HLK-7628N
endef
TARGET_DEVICES += hilink_hlk-7628n
define Device/hiwifi_hc5661a
SOC := mt7628an
IMAGE_SIZE := 15808k
DEVICE_VENDOR := HiWiFi
DEVICE_MODEL := HC5661A
SUPPORTED_DEVICES += hc5661a
endef
TARGET_DEVICES += hiwifi_hc5661a
define Device/hiwifi_hc5761a
SOC := mt7628an
IMAGE_SIZE := 15808k
DEVICE_VENDOR := HiWiFi
DEVICE_MODEL := HC5761A
DEVICE_PACKAGES := kmod-mt76x0e kmod-usb2 kmod-usb-ohci
endef
TARGET_DEVICES += hiwifi_hc5761a
define Device/hiwifi_hc5861b
SOC := mt7628an
IMAGE_SIZE := 15808k
DEVICE_VENDOR := HiWiFi
DEVICE_MODEL := HC5861B
DEVICE_PACKAGES := kmod-mt76x2
endef
TARGET_DEVICES += hiwifi_hc5861b
define Device/iptime_a3
SOC := mt7628an
IMAGE_SIZE := 7936k
UIMAGE_NAME := a3
DEVICE_VENDOR := ipTIME
DEVICE_MODEL := A3
DEVICE_PACKAGES := kmod-mt76x2
endef
TARGET_DEVICES += iptime_a3
define Device/iptime_a604m
SOC := mt7628an
IMAGE_SIZE := 7936k
UIMAGE_NAME := a604m
DEVICE_VENDOR := ipTIME
DEVICE_MODEL := A604M
DEVICE_PACKAGES := kmod-mt76x2
endef
TARGET_DEVICES += iptime_a604m
define Device/mediatek_linkit-smart-7688
SOC := mt7628an
IMAGE_SIZE := 32448k
DEVICE_VENDOR := MediaTek
DEVICE_MODEL := LinkIt Smart 7688
DEVICE_PACKAGES:= kmod-usb2 kmod-usb-ohci uboot-envtools kmod-sdhci-mt7620
SUPPORTED_DEVICES += linkits7688 linkits7688d
endef
TARGET_DEVICES += mediatek_linkit-smart-7688
define Device/mediatek_mt7628an-eval-board
SOC := mt7628an
BLOCKSIZE := 64k
IMAGE_SIZE := 7872k
DEVICE_VENDOR := MediaTek
DEVICE_MODEL := MT7628 EVB
DEVICE_PACKAGES := kmod-usb2 kmod-usb-ohci kmod-usb-ledtrig-usbport
SUPPORTED_DEVICES += mt7628
endef
TARGET_DEVICES += mediatek_mt7628an-eval-board
define Device/mercury_mac1200r-v2
SOC := mt7628an
IMAGE_SIZE := 7936k
DEVICE_VENDOR := Mercury
DEVICE_MODEL := MAC1200R
DEVICE_VARIANT := v2.0
SUPPORTED_DEVICES := mac1200rv2
DEVICE_PACKAGES := kmod-mt76x2
SUPPORTED_DEVICES += mac1200rv2
endef
TARGET_DEVICES += mercury_mac1200r-v2
define Device/netgear_r6120
SOC := mt7628an
BLOCKSIZE := 64k
IMAGE_SIZE := 15744k
DEVICE_VENDOR := NETGEAR
DEVICE_MODEL := R6120
DEVICE_PACKAGES := kmod-mt76x2 kmod-usb2 kmod-usb-ohci
SERCOMM_HWID := CGQ
SERCOMM_HWVER := A001
SERCOMM_SWVER := 0x0040
IMAGES += factory.img
IMAGE/default := append-kernel | pad-to $$$$(BLOCKSIZE)| append-rootfs | \
pad-rootfs
IMAGE/sysupgrade.bin := $$(IMAGE/default) | append-metadata | \
check-size $$$$(IMAGE_SIZE)
IMAGE/factory.img := pad-extra 576k | $$(IMAGE/default) | \
pad-to $$$$(BLOCKSIZE) | sercom-footer | pad-to 128 | zip R6120.bin | \
sercom-seal
endef
TARGET_DEVICES += netgear_r6120
define Device/onion_omega2
SOC := mt7628an
IMAGE_SIZE := 16064k
DEVICE_VENDOR := Onion
DEVICE_MODEL := Omega2
DEVICE_PACKAGES:= kmod-usb2 kmod-usb-ohci uboot-envtools
SUPPORTED_DEVICES += omega2
endef
TARGET_DEVICES += onion_omega2
define Device/onion_omega2p
SOC := mt7628an
IMAGE_SIZE := 32448k
DEVICE_VENDOR := Onion
DEVICE_MODEL := Omega2+
DEVICE_PACKAGES:= kmod-usb2 kmod-usb-ohci uboot-envtools kmod-sdhci-mt7620
SUPPORTED_DEVICES += omega2p
endef
TARGET_DEVICES += onion_omega2p
define Device/rakwireless_rak633
SOC := mt7628an
IMAGE_SIZE := 7872k
DEVICE_VENDOR := Rakwireless
DEVICE_MODEL := RAK633
DEVICE_PACKAGES := kmod-usb2 kmod-usb-ohci
endef
TARGET_DEVICES += rakwireless_rak633
define Device/skylab_skw92a
SOC := mt7628an
IMAGE_SIZE := 16064k
DEVICE_VENDOR := Skylab
DEVICE_MODEL := SKW92A
DEVICE_PACKAGES := kmod-usb2 kmod-usb-ohci
endef
TARGET_DEVICES += skylab_skw92a
define Device/tama_w06
SOC := mt7628an
IMAGE_SIZE := 15040k
DEVICE_VENDOR := Tama
DEVICE_MODEL := W06
DEVICE_PACKAGES := kmod-usb2 kmod-usb-ohci
endef
TARGET_DEVICES += tama_w06
define Device/totolink_lr1200
SOC := mt7628an
IMAGE_SIZE := 7872k
DEVICE_VENDOR := TOTOLINK
DEVICE_MODEL := LR1200
DEVICE_PACKAGES := kmod-mt76x2 kmod-usb2 uqmi
endef
TARGET_DEVICES += totolink_lr1200
define Device/tplink
SOC := mt7628an
DEVICE_VENDOR := TP-Link
TPLINK_FLASHLAYOUT :=
TPLINK_HWID :=
TPLINK_HWREV :=
TPLINK_HWREVADD :=
TPLINK_HVERSION :=
KERNEL := $(KERNEL_DTB)
KERNEL_INITRAMFS := $(KERNEL_DTB) | tplink-v2-header -e
IMAGES += tftp-recovery.bin
IMAGE/factory.bin := tplink-v2-image -e
IMAGE/tftp-recovery.bin := pad-extra 128k | $$(IMAGE/factory.bin)
IMAGE/sysupgrade.bin := tplink-v2-image -s -e | append-metadata | \
check-size $$$$(IMAGE_SIZE)
endef
DEVICE_VARS += TPLINK_FLASHLAYOUT TPLINK_HWID TPLINK_HWREV TPLINK_HWREVADD
DEVICE_VARS += TPLINK_HVERSION
define Device/tplink_archer-c20-v4
$(Device/tplink)
IMAGE_SIZE := 7808k
DEVICE_MODEL := Archer C20
DEVICE_VARIANT := v4
TPLINK_FLASHLAYOUT := 8Mmtk
TPLINK_HWID := 0xc200004
TPLINK_HWREV := 0x1
TPLINK_HWREVADD := 0x4
TPLINK_HVERSION := 3
DEVICE_PACKAGES := kmod-mt76x0e
SUPPORTED_DEVICES += tplink,c20-v4
endef
TARGET_DEVICES += tplink_archer-c20-v4
define Device/tplink_archer-c20-v5
$(Device/tplink)
IMAGE_SIZE := 7616k
DEVICE_MODEL := Archer C20
DEVICE_VARIANT := v5
TPLINK_FLASHLAYOUT := 8MSUmtk
TPLINK_HWID := 0xc200005
TPLINK_HWREV := 0x1
TPLINK_HWREVADD := 0x5
TPLINK_HVERSION := 3
DEVICE_PACKAGES := kmod-mt76x0e
IMAGES := sysupgrade.bin
endef
TARGET_DEVICES += tplink_archer-c20-v5
define Device/tplink_archer-c50-v3
$(Device/tplink)
IMAGE_SIZE := 7808k
DEVICE_MODEL := Archer C50
DEVICE_VARIANT := v3
TPLINK_FLASHLAYOUT := 8Mmtk
TPLINK_HWID := 0x001D9BA4
TPLINK_HWREV := 0x79
TPLINK_HWREVADD := 0x1
TPLINK_HVERSION := 3
DEVICE_PACKAGES := kmod-mt76x2
SUPPORTED_DEVICES += tplink,c50-v3
endef
TARGET_DEVICES += tplink_archer-c50-v3
define Device/tplink_archer-c50-v4
$(Device/tplink)
IMAGE_SIZE := 7616k
DEVICE_MODEL := Archer C50
DEVICE_VARIANT := v4
TPLINK_FLASHLAYOUT := 8MSUmtk
TPLINK_HWID := 0x001D589B
TPLINK_HWREV := 0x93
TPLINK_HWREVADD := 0x2
TPLINK_HVERSION := 3
DEVICE_PACKAGES := kmod-mt76x2
IMAGES := sysupgrade.bin
SUPPORTED_DEVICES += tplink,c50-v4
endef
TARGET_DEVICES += tplink_archer-c50-v4
define Device/tplink_tl-mr3020-v3
$(Device/tplink)
IMAGE_SIZE := 7808k
DEVICE_MODEL := TL-MR3020
DEVICE_VARIANT := v3
TPLINK_FLASHLAYOUT := 8Mmtk
TPLINK_HWID := 0x30200003
TPLINK_HWREV := 0x3
TPLINK_HWREVADD := 0x3
TPLINK_HVERSION := 3
DEVICE_PACKAGES := kmod-usb2 kmod-usb-ohci kmod-usb-ledtrig-usbport
endef
TARGET_DEVICES += tplink_tl-mr3020-v3
define Device/tplink_tl-mr3420-v5
$(Device/tplink)
IMAGE_SIZE := 7808k
DEVICE_MODEL := TL-MR3420
DEVICE_VARIANT := v5
TPLINK_FLASHLAYOUT := 8Mmtk
TPLINK_HWID := 0x34200005
TPLINK_HWREV := 0x5
TPLINK_HWREVADD := 0x5
TPLINK_HVERSION := 3
DEVICE_PACKAGES := kmod-usb2 kmod-usb-ohci kmod-usb-ledtrig-usbport
endef
TARGET_DEVICES += tplink_tl-mr3420-v5
define Device/tplink_tl-wa801nd-v5
$(Device/tplink)
IMAGE_SIZE := 7808k
DEVICE_MODEL := TL-WA801ND
DEVICE_VARIANT := v5
TPLINK_FLASHLAYOUT := 8Mmtk
TPLINK_HWID := 0x08010005
TPLINK_HWREV := 0x1
TPLINK_HWREVADD := 0x5
TPLINK_HVERSION := 3
endef
TARGET_DEVICES += tplink_tl-wa801nd-v5
define Device/tplink_tl-wr802n-v4
$(Device/tplink)
IMAGE_SIZE := 7808k
DEVICE_MODEL := TL-WR802N
DEVICE_VARIANT := v4
TPLINK_FLASHLAYOUT := 8Mmtk
TPLINK_HWID := 0x08020004
TPLINK_HWREV := 0x1
TPLINK_HWREVADD := 0x4
TPLINK_HVERSION := 3
endef
TARGET_DEVICES += tplink_tl-wr802n-v4
define Device/tplink_tl-wr840n-v4
$(Device/tplink)
IMAGE_SIZE := 7808k
DEVICE_MODEL := TL-WR840N
DEVICE_VARIANT := v4
TPLINK_FLASHLAYOUT := 8Mmtk
TPLINK_HWID := 0x08400004
TPLINK_HWREV := 0x1
TPLINK_HWREVADD := 0x4
TPLINK_HVERSION := 3
SUPPORTED_DEVICES += tl-wr840n-v4
endef
TARGET_DEVICES += tplink_tl-wr840n-v4
define Device/tplink_tl-wr840n-v5
SOC := mt7628an
IMAGE_SIZE := 3904k
DEVICE_VENDOR := TP-Link
DEVICE_MODEL := TL-WR840N
DEVICE_VARIANT := v5
TPLINK_FLASHLAYOUT := 4Mmtk
TPLINK_HWID := 0x08400005
TPLINK_HWREV := 0x1
TPLINK_HWREVADD := 0x5
TPLINK_HVERSION := 3
KERNEL := $(KERNEL_DTB)
KERNEL_INITRAMFS := $(KERNEL_DTB) | tplink-v2-header -e
IMAGE/sysupgrade.bin := tplink-v2-image -s -e | append-metadata | \
check-size $$$$(IMAGE_SIZE)
SUPPORTED_DEVICES += tl-wr840n-v5
endef
TARGET_DEVICES += tplink_tl-wr840n-v5
define Device/tplink_tl-wr841n-v13
$(Device/tplink)
IMAGE_SIZE := 7808k
DEVICE_MODEL := TL-WR841N
DEVICE_VARIANT := v13
TPLINK_FLASHLAYOUT := 8Mmtk
TPLINK_HWID := 0x08410013
TPLINK_HWREV := 0x268
TPLINK_HWREVADD := 0x13
TPLINK_HVERSION := 3
SUPPORTED_DEVICES += tl-wr841n-v13
endef
TARGET_DEVICES += tplink_tl-wr841n-v13
define Device/tplink_tl-wr841n-v14
$(Device/tplink)
IMAGE_SIZE := 3968k
DEVICE_MODEL := TL-WR841N
DEVICE_VARIANT := v14
TPLINK_FLASHLAYOUT := 4Mmtk
TPLINK_HWID := 0x08410014
TPLINK_HWREV := 0x1
TPLINK_HWREVADD := 0x14
TPLINK_HVERSION := 3
IMAGE/tftp-recovery.bin := pad-extra 64k | $$(IMAGE/factory.bin)
endef
TARGET_DEVICES += tplink_tl-wr841n-v14
define Device/tplink_tl-wr842n-v5
$(Device/tplink)
IMAGE_SIZE := 7808k
DEVICE_MODEL := TL-WR842N
DEVICE_VARIANT := v5
TPLINK_FLASHLAYOUT := 8Mmtk
TPLINK_HWID := 0x08420005
TPLINK_HWREV := 0x5
TPLINK_HWREVADD := 0x5
TPLINK_HVERSION := 3
DEVICE_PACKAGES := kmod-usb2 kmod-usb-ohci kmod-usb-ledtrig-usbport
endef
TARGET_DEVICES += tplink_tl-wr842n-v5
define Device/tplink_tl-wr902ac-v3
$(Device/tplink)
IMAGE_SIZE := 7808k
DEVICE_MODEL := TL-WR902AC
DEVICE_VARIANT := v3
TPLINK_FLASHLAYOUT := 8Mmtk
TPLINK_HWID := 0x000dc88f
TPLINK_HWREV := 0x89
TPLINK_HWREVADD := 0x1
TPLINK_HVERSION := 3
DEVICE_PACKAGES := kmod-mt76x0e kmod-usb2 kmod-usb-ohci \
kmod-usb-ledtrig-usbport
endef
TARGET_DEVICES += tplink_tl-wr902ac-v3
define Device/unielec_u7628-01-16m
SOC := mt7628an
IMAGE_SIZE := 16064k
DEVICE_VENDOR := UniElec
DEVICE_MODEL := U7628-01
DEVICE_VARIANT := 16M
DEVICE_PACKAGES := kmod-usb2 kmod-usb-ohci kmod-usb-ledtrig-usbport
SUPPORTED_DEVICES += u7628-01-128M-16M unielec,u7628-01-128m-16m
endef
TARGET_DEVICES += unielec_u7628-01-16m
define Device/vocore_vocore2
SOC := mt7628an
IMAGE_SIZE := 16064k
DEVICE_VENDOR := VoCore
DEVICE_MODEL := VoCore2
DEVICE_PACKAGES := kmod-usb2 kmod-usb-ohci kmod-usb-ledtrig-usbport \
kmod-sdhci-mt7620
SUPPORTED_DEVICES += vocore2
endef
TARGET_DEVICES += vocore_vocore2
define Device/vocore_vocore2-lite
SOC := mt7628an
IMAGE_SIZE := 7872k
DEVICE_VENDOR := VoCore
DEVICE_MODEL := VoCore2-Lite
DEVICE_PACKAGES := kmod-usb2 kmod-usb-ohci kmod-usb-ledtrig-usbport \
kmod-sdhci-mt7620
SUPPORTED_DEVICES += vocore2lite
endef
TARGET_DEVICES += vocore_vocore2-lite
define Device/wavlink_wl-wn570ha1
SOC := mt7628an
IMAGE_SIZE := 7872k
DEVICE_VENDOR := Wavlink
DEVICE_MODEL := WL-WN570HA1
DEVICE_PACKAGES := kmod-mt76x0e
endef
TARGET_DEVICES += wavlink_wl-wn570ha1
define Device/wavlink_wl-wn575a3
SOC := mt7628an
IMAGE_SIZE := 7872k
DEVICE_VENDOR := Wavlink
DEVICE_MODEL := WL-WN575A3
DEVICE_PACKAGES := kmod-mt76x2
SUPPORTED_DEVICES += wl-wn575a3
endef
TARGET_DEVICES += wavlink_wl-wn575a3
define Device/widora_neo-16m
SOC := mt7628an
IMAGE_SIZE := 16064k
DEVICE_VENDOR := Widora
DEVICE_MODEL := Widora-NEO
DEVICE_VARIANT := 16M
DEVICE_PACKAGES := kmod-usb2 kmod-usb-ohci
SUPPORTED_DEVICES += widora-neo
endef
TARGET_DEVICES += widora_neo-16m
define Device/widora_neo-32m
SOC := mt7628an
IMAGE_SIZE := 32448k
DEVICE_VENDOR := Widora
DEVICE_MODEL := Widora-NEO
DEVICE_VARIANT := 32M
DEVICE_PACKAGES := kmod-usb2 kmod-usb-ohci
endef
TARGET_DEVICES += widora_neo-32m
define Device/wiznet_wizfi630s
SOC := mt7628an
IMAGE_SIZE := 32448k
DEVICE_VENDOR := WIZnet
DEVICE_MODEL := WizFi630S
endef
TARGET_DEVICES += wiznet_wizfi630s
define Device/wrtnode_wrtnode2p
SOC := mt7628an
IMAGE_SIZE := 32448k
DEVICE_VENDOR := WRTnode
DEVICE_MODEL := WRTnode 2P
DEVICE_PACKAGES := kmod-usb2 kmod-usb-ohci kmod-usb-ledtrig-usbport
SUPPORTED_DEVICES += wrtnode2p
endef
TARGET_DEVICES += wrtnode_wrtnode2p
define Device/wrtnode_wrtnode2r
SOC := mt7628an
IMAGE_SIZE := 32448k
DEVICE_VENDOR := WRTnode
DEVICE_MODEL := WRTnode 2R
DEVICE_PACKAGES := kmod-usb2 kmod-usb-ohci
SUPPORTED_DEVICES += wrtnode2r
endef
TARGET_DEVICES += wrtnode_wrtnode2r
define Device/xiaomi_mir4a-100m
SOC := mt7628an
IMAGE_SIZE := 14976k
DEVICE_VENDOR := Xiaomi
DEVICE_MODEL := Mi Router 4A
DEVICE_VARIANT := 100M Edition
DEVICE_PACKAGES := kmod-mt76x2
endef
TARGET_DEVICES += xiaomi_mir4a-100m
define Device/xiaomi_miwifi-nano
SOC := mt7628an
IMAGE_SIZE := 16064k
DEVICE_VENDOR := Xiaomi
DEVICE_MODEL := MiWiFi Nano
DEVICE_PACKAGES := uboot-envtools
SUPPORTED_DEVICES += miwifi-nano
endef
TARGET_DEVICES += xiaomi_miwifi-nano
define Device/zbtlink_zbt-we1226
SOC := mt7628an
IMAGE_SIZE := 7872k
DEVICE_VENDOR := Zbtlink
DEVICE_MODEL := ZBT-WE1226
endef
TARGET_DEVICES += zbtlink_zbt-we1226
define Device/zyxel_keenetic-extra-ii
SOC := mt7628an
IMAGE_SIZE := 14912k
BLOCKSIZE := 64k
DEVICE_VENDOR := ZyXEL
DEVICE_MODEL := Keenetic Extra II
DEVICE_PACKAGES := kmod-mt76x2 kmod-usb2 kmod-usb-ohci \
kmod-usb-ledtrig-usbport
IMAGES += factory.bin
IMAGE/factory.bin := $$(sysupgrade_bin) | pad-to $$$$(BLOCKSIZE) | \
check-size $$$$(IMAGE_SIZE) | zyimage -d 6162 -v "ZyXEL Keenetic Extra II"
endef
TARGET_DEVICES += zyxel_keenetic-extra-ii
Reference in New Issue View Git Blame Copy Permalink