Chuncheng Chen 502916468e ramips: add support for ASUS 4G-AX56 ... Specifications: - Device: ASUS 4g-AX56 - SoC: MT7621AT - Flash: 128MB - RAM: 512MB - Switch: 1 WAN, 4 LAN (10/100/1000 Mbps) - WiFi: MT7905 2x2 2.4G + MT7975 2x2 5G - LTE : Fibocom FG621-EA - LEDs: 1x POWER (white, configurable) 1x 2.4G (white, not configurable) 1x 5G (white, not configurable) 1x WAN (white, not configurable) 1x 3G/4G (white, not configurable) 3x signal (white, not configurable) Flash by U-Boot TFTP method: - Configure your PC with IP 192.168.0.2 - Set up TFTP server and put the factory.bin image on your PC - Connect serial port(rate:115200) and turn on AP, then interrupt "U-Boot Boot Menu" by hitting any key Select "2. Upgrade firmware" Press enter when show "Run firmware after upgrading? (Y/n):" Select 0 for TFTP method Input U-Boot's IP address: 192.168.0.1 Input TFTP server's IP address: 192.168.0.2 Input IP netmask: 255.255.255.0 Input file name: openwrt-ramips-mt7621-asus_4g-ax56-squashfs-factory.bin - Restart AP aftre see the log "Firmware upgrade completed!" Notice: - LTE module is disable after flash openwrt image so you must active LTE by following two AT command echo -e "AT+GTAUTOCONNECT=1\r\n" > /dev/ttyUSB0 echo -e "AT+GTRNDIS=1,1\r\n" > /dev/ttyUSB0 - After finish AT command once, you don't need to input command later even if reboot/restore default Signed-off-by: Chuncheng Chen <ccchen1984@gmail.com> Link: https://github.com/openwrt/openwrt/pull/16752 Signed-off-by: John Crispin <john@phrozen.org>		2024-12-13 15:29:04 +01:00
..
etc	rampis: mt7621: Edgerouter-X update compat version to 2.0	2024-11-08 12:37:08 +00:00
lib	ramips: add support for ASUS 4G-AX56	2024-12-13 15:29:04 +01:00
sbin	ramips: split base-files into subtargets	2019-11-03 00:26:17 +01:00