mirror of
https://github.com/openwrt/openwrt.git
synced 2024-12-27 01:11:14 +00:00
6e7bc0c243
TP-Link RE205 v3 is a wireless range extender with Ethernet and 2.4G and 5G WiFi with external antennas. It's based on MediaTek MT7628AN+MT7610EN like the RE200 v3/v4 but with external antennas. Specifications -------------- - MediaTek MT7628AN (580 Mhz) - 64 MB of RAM - 8 MB of FLASH - 2T2R 2.4 GHz and 1T1R 5 GHz - 1x 10/100 Mbps Ethernet - 5x LED (GPIO-controlled), 2x button - UART connection holes on PCB (57600 8n1) There are 2.4G and 5G LEDs in blue which are controlled separately. Installation ------------ Installation is identical to RE200 v3 devices as described at https://openwrt.org/toh/tp-link/re200#installation Web Interface ------------- It is possible to upgrade to OpenWrt via the web interface. Simply flash the -factory.bin from OEM. In contrast to a stock firmware, this will not overwrite U-Boot. Recovery -------- U-Boot seems to be locked on newer versions, if not it can be accessed over the UART as described in the link above. Signed-off-by: Steffen Loley <slo-src@web.de>
45 lines
881 B
Plaintext
45 lines
881 B
Plaintext
// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
|
|
|
|
#include "mt7628an_tplink_re200.dtsi"
|
|
|
|
/ {
|
|
compatible = "tplink,re205-v3", "mediatek,mt7628an-soc";
|
|
model = "TP-Link RE205 v3";
|
|
|
|
/delete-node/ leds;
|
|
|
|
leds {
|
|
compatible = "gpio-leds";
|
|
|
|
led_power: power {
|
|
function = LED_FUNCTION_POWER;
|
|
color = <LED_COLOR_ID_BLUE>;
|
|
gpios = <&gpio 39 GPIO_ACTIVE_LOW>;
|
|
};
|
|
|
|
wifi5g {
|
|
function = LED_FUNCTION_WLAN_5GHZ;
|
|
color = <LED_COLOR_ID_BLUE>;
|
|
gpios = <&gpio 40 GPIO_ACTIVE_LOW>;
|
|
linux,default-trigger = "phy1tpt";
|
|
};
|
|
|
|
wifi2g {
|
|
function = LED_FUNCTION_WLAN_2GHZ;
|
|
color = <LED_COLOR_ID_BLUE>;
|
|
gpios = <&gpio 41 GPIO_ACTIVE_LOW>;
|
|
linux,default-trigger = "phy0tpt";
|
|
};
|
|
|
|
signal_blue {
|
|
label = "blue:signal";
|
|
gpios = <&gpio 42 GPIO_ACTIVE_LOW>;
|
|
};
|
|
|
|
signal_red {
|
|
label = "red:signal";
|
|
gpios = <&gpio 43 GPIO_ACTIVE_LOW>;
|
|
};
|
|
};
|
|
};
|