mirror of
https://github.com/openwrt/openwrt.git
synced 2024-12-27 01:11:14 +00:00
3d6cbe287a
The WLR-1230 (ZX-5207) is an AC1200 Wave 2 outdoor repeater with sector antennas for wall or pole mounting. The device is manufactured by Todaair and meant to be used with a tuya-based app, there is no webinterface for configuration. Specifications: - MT7628AN, 8 MiB SPI NOR flash, 64 MiB RAM, 2x2 802.11n - MT7613 2x2 802.11ac Wave 2 - 802.3af PoE or 12V 1A 5.5x2.1 power supply (included) - 3 LEDs WLAN, LAN, RES; PWR LED is not software-controllable TFTP installation: - rename sysupgrade to `firmware_auto.bin` - provide at 192.168.1.10 during boot HTTP installation: - keep reset button pressed for 5 seconds during power on (LEDs flash slowly, then quickly to confirm, then remain steady on) - recovery web interface is at 192.168.1.1, upload sysupgrade Opening the device - two screws are located in the bottom left and right corners underneath the label, inner tray slides out easily initramfs boot - open device, connect serial console (pins are labelled) - keep pressing `4` during second tftp attempt to enter uboot shell - run `tftpboot 82000000` to avoid memory overlap, then `bootm` Signed-off-by: Sebastian Schaper <openwrt@sebastianschaper.net>
41 lines
813 B
Plaintext
41 lines
813 B
Plaintext
// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
|
|
|
|
#include "mt7628an_7links_wlr-12xx.dtsi"
|
|
|
|
/ {
|
|
compatible = "7links,wlr-1230", "mediatek,mt7628an-soc";
|
|
model = "7Links WLR-1230";
|
|
|
|
leds {
|
|
compatible = "gpio-leds";
|
|
|
|
led_res: res {
|
|
function = LED_FUNCTION_STATUS;
|
|
color = <LED_COLOR_ID_ORANGE>;
|
|
gpios = <&gpio 11 GPIO_ACTIVE_LOW>;
|
|
default-state = "on";
|
|
};
|
|
|
|
wlan {
|
|
function = LED_FUNCTION_WLAN;
|
|
color = <LED_COLOR_ID_ORANGE>;
|
|
gpios = <&gpio 37 GPIO_ACTIVE_LOW>;
|
|
linux,default-trigger = "phy1tpt";
|
|
};
|
|
|
|
lan {
|
|
function = LED_FUNCTION_LAN;
|
|
color = <LED_COLOR_ID_ORANGE>;
|
|
gpios = <&gpio 44 GPIO_ACTIVE_LOW>;
|
|
};
|
|
};
|
|
|
|
aliases {
|
|
led-boot = &led_res;
|
|
led-failsafe = &led_res;
|
|
led-running = &led_res;
|
|
led-upgrade = &led_res;
|
|
label-mac-device = ðernet;
|
|
};
|
|
};
|