mirror of
https://github.com/openwrt/openwrt.git
synced 2024-12-25 08:21:14 +00:00
9261e7447e
This makes the patches which were just copied in the previous commit apply on top of kernel 4.19. The patches in the backports-4.19 folder were checked if they are really in kernel 4.19 based on the title and only removed if they were found in the upstream kernel. The following additional patches form the pending folder went into upstream Linux 4.19: pending-4.19/171-usb-dwc2-Fix-inefficient-copy-of-unaligned-buffers.patch pending-4.19/190-2-5-e1000e-Fix-wrong-comment-related-to-link-detection.patch pending-4.19/478-mtd-spi-nor-Add-support-for-XM25QH64A-and-XM25QH128A.patch pending-4.19/479-mtd-spi-nor-add-eon-en25qh32.patch pending-4.19/950-tty-serial-exar-generalize-rs485-setup.patch pending-4.19/340-MIPS-mm-remove-mips_dma_mapping_error.patch Bigger changes were introduced to the m25p80 spi nor driver, as far as I saw it in the new code, it now has the functionality provided in this patch: pending-4.19/450-mtd-m25p80-allow-fallback-from-spi_flash_read-to-reg.patch Part of this patch went upstream independent of OpenWrt: hack-4.19/220-gc_sections.patch This patch was reworked to match the changes done upstream. The MIPS DMA API changed a lot, this patch was rewritten to match the new DMA handling: pending-4.19/341-MIPS-mm-remove-no-op-dma_map_ops-where-possible.patch I did bigger manual changes to the following patches and I am not 100% sure if they are all correct: pending-4.19/0931-w1-gpio-fix-problem-with-platfom-data-in-w1-gpio.patch pending-4.19/411-mtd-partial_eraseblock_write.patch pending-4.19/600-netfilter_conntrack_flush.patch pending-4.19/611-netfilter_match_bypass_default_table.patch pending-4.19/670-ipv6-allow-rejecting-with-source-address-failed-policy.patch hack-4.19/211-host_tools_portability.patch hack-4.19/221-module_exports.patch hack-4.19/321-powerpc_crtsavres_prereq.patch hack-4.19/902-debloat_proc.patch This is based on patchset from Marko Ratkaj <marko.ratkaj@sartura.hr> Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
26 lines
1.0 KiB
Diff
26 lines
1.0 KiB
Diff
From: Felix Fietkau <nbd@nbd.name>
|
|
Subject: kernel: disable cfi cmdset 0002 erase suspend
|
|
|
|
on some platforms, erase suspend leads to data corruption and lockups when write
|
|
ops collide with erase ops. this has been observed on the buffalo wzr-hp-g300nh.
|
|
rather than play whack-a-mole with a hard to reproduce issue on a variety of devices,
|
|
simply disable erase suspend, as it will usually not produce any useful gain on
|
|
the small filesystems used on embedded hardware.
|
|
|
|
Signed-off-by: Felix Fietkau <nbd@nbd.name>
|
|
---
|
|
drivers/mtd/chips/cfi_cmdset_0002.c | 2 +-
|
|
1 file changed, 1 insertion(+), 1 deletion(-)
|
|
|
|
--- a/drivers/mtd/chips/cfi_cmdset_0002.c
|
|
+++ b/drivers/mtd/chips/cfi_cmdset_0002.c
|
|
@@ -812,7 +812,7 @@ static int get_chip(struct map_info *map
|
|
return 0;
|
|
|
|
case FL_ERASING:
|
|
- if (!cfip || !(cfip->EraseSuspend & (0x1|0x2)) ||
|
|
+ if (1 /* no suspend */ || !cfip || !(cfip->EraseSuspend & (0x1|0x2)) ||
|
|
!(mode == FL_READY || mode == FL_POINT ||
|
|
(mode == FL_WRITING && (cfip->EraseSuspend & 0x2))))
|
|
goto sleep;
|