mirror of
https://github.com/openwrt/openwrt.git
synced 2024-12-27 01:11:14 +00:00
a04d733e56
ELECOM WRC-1167GS2-B is a 2.4/5 GHz band 11ac (Wi-Fi 5) router, based on MT7621A. Specification: - SoC : MediaTek MT7621A - RAM : DDR3 128 MiB - Flash : SPI-NOR 16 MiB - WLAN : 2.4/5 GHz 2T2R (MediaTek MT7615D) - Ethernet : 10/100/1000 Mbps x5 - Switch : MediaTek MT7530 (SoC) - LED/keys : 6x/6x (2x buttons, 1x slide-switch) - UART : through-hole on PCB - J4: 3.3V, GND, TX, RX from ethernet port side - 57600n8 - Power : 12VDC, 1A MAC addresses: LAN : 04:AB:18:**:**:13 (Factory, 0xFFF4 (hex)) WAN : 04:AB:18:**:**:14 (Factory, 0xFFFA (hex)) 2.4 GHz : 04:AB:18:**:**:15 (none) 5 GHz : 04:AB:18:**:**:16 (Factory, 0x4 (hex)) Flash instruction using factory image: 1. Boot WRC-1167GS2-B normally 2. Access to "http://192.168.2.1/" and open firmware update page ("ファームウェア更新") 3. Select the OpenWrt factory image and click apply ("適用") button 4. Wait ~120 seconds to complete flashing Notes: - there is no way to configure the correct MAC address for secondary phy (5GHz) on MT7615D - Wi-Fi band on primary phy (2.4GHz) cannot be limitted by specifying ieee80211-freq-limit (fail to register secondary phy due to error) - mtd-mac-address in the wifi node is required for using mtd-mac-address-increment Signed-off-by: INAGAKI Hiroshi <musashino.open@gmail.com> [rebase onto split DTSI patch] Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
54 lines
853 B
Plaintext
54 lines
853 B
Plaintext
// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
|
|
|
|
#include "mt7621_elecom_wrc-gs-1pci.dtsi"
|
|
|
|
/ {
|
|
compatible = "elecom,wrc-1167gs2-b", "mediatek,mt7621-soc";
|
|
model = "ELECOM WRC-1167GS2-B";
|
|
};
|
|
|
|
&gmac0 {
|
|
mtd-mac-address = <&factory 0xfff4>;
|
|
};
|
|
|
|
&wan {
|
|
mtd-mac-address = <&factory 0xfffa>;
|
|
};
|
|
|
|
&partitions {
|
|
partition@50000 {
|
|
compatible = "denx,uimage";
|
|
label = "firmware";
|
|
reg = <0x50000 0xb00000>;
|
|
};
|
|
|
|
partition@b50000 {
|
|
label = "tm_pattern";
|
|
reg = <0xb50000 0x380000>;
|
|
read-only;
|
|
};
|
|
|
|
partition@ed0000 {
|
|
label = "tm_key";
|
|
reg = <0xed0000 0x80000>;
|
|
read-only;
|
|
};
|
|
|
|
partition@f50000 {
|
|
label = "nvram";
|
|
reg = <0xf50000 0x30000>;
|
|
read-only;
|
|
};
|
|
|
|
partition@f80000 {
|
|
label = "user_data";
|
|
reg = <0xf80000 0x80000>;
|
|
read-only;
|
|
};
|
|
};
|
|
|
|
&wifi {
|
|
mtd-mac-address = <&factory 0x4>;
|
|
mtd-mac-address-increment = <(-1)>;
|
|
};
|