openwrt/target/linux/lantiq
Stijn Segers 215c1d05b8 kernel: update kernel 4.4 to 4.4.69
Bump the 17.01 tree kernel to 4.4.69. Trunk 4.4 and 17.01 4.4 have diverged, talked this
through with jow, he was okay with a clean diff against 17.01 and not a backported trunk
patch.

The following patches were applied upstream:

* 062-[1-6]-MIPS-* series
* 042-0004-mtd-bcm47xxpart-fix-parsing-first-block

Reintroduced lantiq/patches-4.4/0050-MIPS-Lantiq-Fix-cascaded-IRQ-setup, as
it was incorrectly included upstream thus dropped from LEDE, but subsequently
reverted upstream. Thanks to Kevin Darbyshire-Bryant for pointing me to it.

  Compile-tested on: ar71xx, ramips/mt7621, x86/64.

  Run-tested on: ar71xx, ramips/mt7621, x86/64.

Signed-off-by: Stijn Segers <francesco.borromini@inventati.org>
2017-05-24 22:47:01 +02:00
..
base-files lantiq: fix avm fritz box mac addresses 2017-05-05 19:59:18 +02:00
dts lantiq: fix avm fritz box mac addresses 2017-05-05 19:59:18 +02:00
falcon build: remove mips16 feature flag from target makefiles 2017-01-24 13:35:45 +01:00
files/firmware/lantiq move GPHY FW blobs to non versioned folder 2013-03-14 18:42:21 +00:00
image lantiq: fix brnImage signature for the VGV7510KW22BRN images 2017-01-28 12:44:35 +01:00
patches-4.4 kernel: update kernel 4.4 to 4.4.69 2017-05-24 22:47:01 +02:00
xrx200 build: remove mips16 feature flag from target makefiles 2017-01-24 13:35:45 +01:00
xway build: remove mips16 feature flag from target makefiles 2017-01-24 13:35:45 +01:00
xway_legacy build: remove mips16 feature flag from target makefiles 2017-01-24 13:35:45 +01:00
config-4.4 lantiq: add cpu temperatur sensor driver for xrx200 2016-08-03 15:30:13 +02:00
Makefile lantiq: remove CPU_TYPE:=mips32r2, it gets overwritten anyway 2017-01-24 13:35:47 +01:00
modules.mk fix i2c-lantiq module 2012-12-16 10:03:18 +00:00