openwrt/target/linux/ramips/dts/mt7621_tplink_re350-v1.dts
Shiji Yang 01996b785d ramips: clean up useless dts partition labels
The previous NVMEM eeprom conversions[1][2] left a lot of partition
labels that were no longer used. They can be removed now.

[1] https://github.com/openwrt/openwrt/pull/13584
[2] https://github.com/openwrt/openwrt/pull/13587

Signed-off-by: Shiji Yang <yangshiji66@qq.com>
2024-02-21 13:31:18 +01:00

200 lines
3.3 KiB
Plaintext

#include "mt7621.dtsi"
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/input/input.h>
#include <dt-bindings/leds/common.h>
/ {
compatible = "tplink,re350-v1", "mediatek,mt7621-soc";
model = "TP-LINK RE350 v1";
aliases {
led-boot = &led_power;
led-failsafe = &led_power;
led-running = &led_power;
led-upgrade = &led_power;
};
leds {
compatible = "gpio-leds";
led_power: power {
function = LED_FUNCTION_POWER;
color = <LED_COLOR_ID_BLUE>;
gpios = <&gpio 22 GPIO_ACTIVE_LOW>;
};
wifi2g {
label = "blue:wifi2G";
gpios = <&gpio 23 GPIO_ACTIVE_LOW>;
};
wifi5g {
label = "blue:wifi5G";
gpios = <&gpio 24 GPIO_ACTIVE_LOW>;
};
wps_r {
function = LED_FUNCTION_WPS;
color = <LED_COLOR_ID_RED>;
gpios = <&gpio 25 GPIO_ACTIVE_HIGH>;
};
wps_b {
function = LED_FUNCTION_WPS;
color = <LED_COLOR_ID_BLUE>;
gpios = <&gpio 26 GPIO_ACTIVE_HIGH>;
};
eth {
label = "green:eth_act";
gpios = <&gpio 28 GPIO_ACTIVE_LOW>;
};
eth2 {
label = "green:eth_link";
gpios = <&gpio 29 GPIO_ACTIVE_LOW>;
};
};
keys {
compatible = "gpio-keys";
led {
label = "led";
gpios = <&gpio 30 GPIO_ACTIVE_LOW>;
linux,code = <BTN_0>;
};
reset {
label = "reset";
gpios = <&gpio 31 GPIO_ACTIVE_LOW>;
linux,code = <KEY_RESTART>;
};
power {
label = "power";
gpios = <&gpio 32 GPIO_ACTIVE_LOW>;
linux,code = <KEY_POWER>;
};
wps {
label = "wps";
gpios = <&gpio 33 GPIO_ACTIVE_LOW>;
linux,code = <KEY_WPS_BUTTON>;
};
};
};
&spi0 {
status = "okay";
flash@0 {
compatible = "jedec,spi-nor";
reg = <0>;
spi-max-frequency = <10000000>;
partitions {
compatible = "fixed-partitions";
#address-cells = <1>;
#size-cells = <1>;
partition@0 {
label = "u-boot";
reg = <0x0 0x20000>;
read-only;
};
partition@20000 {
compatible = "tplink,firmware";
label = "firmware";
reg = <0x20000 0x5e0000>;
};
partition@600000 {
label = "config";
reg = <0x600000 0x50000>;
read-only;
nvmem-layout {
compatible = "fixed-layout";
#address-cells = <1>;
#size-cells = <1>;
macaddr_config_10008: macaddr@10008 {
compatible = "mac-base";
reg = <0x10008 0x6>;
#nvmem-cell-cells = <1>;
};
};
};
partition@7f0000 {
label = "radio";
reg = <0x7f0000 0x10000>;
read-only;
nvmem-layout {
compatible = "fixed-layout";
#address-cells = <1>;
#size-cells = <1>;
eeprom_radio_0: eeprom@0 {
reg = <0x0 0x400>;
};
eeprom_radio_8000: eeprom@8000 {
reg = <0x8000 0x200>;
};
};
};
};
};
};
&pcie {
status = "okay";
};
&pcie0 {
mt76@0,0 {
reg = <0x0000 0 0 0 0>;
nvmem-cells = <&eeprom_radio_0>, <&macaddr_config_10008 1>;
nvmem-cell-names = "eeprom", "mac-address";
};
};
&pcie1 {
mt76@0,0 {
reg = <0x0000 0 0 0 0>;
ieee80211-freq-limit = <5000000 6000000>;
nvmem-cells = <&eeprom_radio_8000>, <&macaddr_config_10008 2>;
nvmem-cell-names = "eeprom", "mac-address";
};
};
&ethernet {
pinctrl-0 = <&mdio_pins>, <&rgmii1_pins>;
};
&gmac0 {
nvmem-cells = <&macaddr_config_10008 0>;
nvmem-cell-names = "mac-address";
};
&switch0 {
ports {
port@0 {
status = "okay";
label = "lan";
};
};
};
&state_default {
gpio {
groups = "rgmii2", "wdt";
function = "gpio";
};
};