openwrt/target/linux/ath79
Ding Tengfei acf149d531 ath79: add support for COMFAST CF-E5/E7
COMFAST CF-E5/E7 is a outdoor 4G LTE AP with PoE support, based on
Qualcomm/Atheros QCA9531.

Short specification:

    2x 10/100 Mbps Ethernet, with 24v PoE support
    64 MB of RAM (DDR2)
    16 MB of FLASH (SPI)
    2T2R 2.4 GHz, 802.11b/g/n
    built-in 1x 3 dBi antennas
    output power (max): 80 mW (19 dBm)
    Qucetel EC20 LTE MODULE(1x external detachable antenna)

Flash instruction:

Original firmware is based on OpenWrt.
Use sysupgrade image directly in vendor GUI.

Signed-off-by: Ding Tengfei <dtf@comfast.cn>
[commit subject fix]
Signed-off-by: Petr Štetiar <ynezz@true.cz>
2019-03-24 01:44:27 +01:00
..
base-files ath79: add support for COMFAST CF-E5/E7 2019-03-24 01:44:27 +01:00
dts ath79: add support for COMFAST CF-E5/E7 2019-03-24 01:44:27 +01:00
files ath79: ag71xx: remove switch driver in ag71xx 2019-03-24 01:44:27 +01:00
generic ath79: add support for jjPlus JA76PF2 2019-03-18 20:43:09 +01:00
image ath79: add support for COMFAST CF-E5/E7 2019-03-24 01:44:27 +01:00
nand treewide: use wpad-basic for not small flash targets 2018-10-16 15:07:41 +01:00
patches-4.14 kernel: bump 4.14 to 4.14.107 2019-03-22 18:14:28 +01:00
patches-4.19 ath79: add support for linux 4.19 2019-03-24 01:44:25 +01:00
tiny treewide: use wpad-basic for not small flash targets 2018-10-16 15:07:41 +01:00
config-4.14 ath79: add support for D-Link DIR-859 A1 2018-12-30 20:08:13 +01:00
config-4.19 ath79: add support for linux 4.19 2019-03-24 01:44:25 +01:00
Makefile ath79: Remove source-only flag 2018-11-26 12:24:54 +01:00
modules.mk ath79: add new OF only target for QCA MIPS silicon 2018-05-07 08:06:51 +02:00