mirror of
https://github.com/openwrt/openwrt.git
synced 2024-12-19 13:48:06 +00:00
b9389186b0
Specifications: SOC: Qualcomm IPQ4018 (DAKOTA) ARM Quad-Core RAM: 256 MiB FLASH1: 4 MiB NOR FLASH2: 128 MiB NAND ETH: Qualcomm QCA8075 WLAN1: Qualcomm Atheros QCA4018 2.4GHz 802.11b/g/n 2x2 WLAN2: Qualcomm Atheros QCA4018 5GHz 802.11n/ac W2 2x2 INPUT: Reset LED: Power, Internet UART1: On board pin header near to LED (3.3V, TX, RX, GND), 3.3V without pin - 115200 8N1 OTHER: On board with BLE module - by cp210x USB serial chip On board hareware watchdog with GPIO0 high to turn on, and GPIO4 for watchdog feed Install via uboot tftp or uboot web failsafe. By uboot tftp: (IPQ40xx) # tftpboot 0x84000000 openwrt-ipq40xx-generic-glinet_gl-ap1300-squashfs-nand-factory.ubi (IPQ40xx) # run lf By uboot web failsafe: Push the reset button for 10 seconds util the power led flash faster, then use broswer to access http://192.168.1.1 Afterwards upgrade can use sysupgrade image. Signed-off-by: Dongming Han <handongming@gl-inet.com> |
||
---|---|---|
.. | ||
board-8dev_habanero-dvk.qca4019 | ||
board-aruba_ap-303.qca4019 | ||
board-avm_fritzrepeater-1200.qca4019 | ||
board-buffalo_wtr-m2133hp.qca4019 | ||
board-buffalo_wtr-m2133hp.qca9984 | ||
board-cellc_rtl30vw.qca4019 | ||
board-devolo_magic-2-wifi-next.qca4019 | ||
board-dlink_dap2610.qca4019 | ||
board-edgecore_ecw5410.qca9984 | ||
board-edgecore_oap100.qca4019 | ||
board-engenius_eap2200.qca4019 | ||
board-engenius_eap2200.qca9888 | ||
board-engenius_emd1.qca4019 | ||
board-engenius_emr3500.qca4019 | ||
board-ezviz_cs-w3-wd1200g-eup.qca4019 | ||
board-glinet_gl-ap1300.qca4019 | ||
board-glinet_gl-s1300.qca4019 | ||
board-linksys_ea8300.qca4019 | ||
board-linksys_ea8300.qca9888 | ||
board-linksys_mr8300-v0.qca4019 | ||
board-linksys_mr8300-v0.qca9888 | ||
board-luma_wrtq-329acn.qca4019 | ||
board-mobipromo_cm520-79f.qca4019 | ||
board-nec_wg2600hp3.qca9984 | ||
board-plasmacloud_pa1200.qca4019 | ||
board-plasmacloud_pa2200.qca4019 | ||
board-plasmacloud_pa2200.qca9888 | ||
board-qxwlan_e2600ac.qca4019 | ||
Makefile |