mirror of
https://github.com/openwrt/openwrt.git
synced 2024-12-25 00:11:13 +00:00
0c45ad41e1
- Replace dwc3 phy patch with upstream version - Rework the dts to use the upstream bindings - Update changed config flags - Rename module to reflect config name Signed-off-by: Ansuel Smith <ansuelsmth@gmail.com> [fix qcom,tx-deamp_3_5db typo, refresh patches, rename kmod] Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de> Tested-by: Paul Blazejowski <paulb@blazebox.homeip.net> [R7800]
622 lines
18 KiB
Diff
622 lines
18 KiB
Diff
From ef19b117b83466e1c030368101a24367a34be7f0 Mon Sep 17 00:00:00 2001
|
|
From: Ansuel Smith <ansuelsmth@gmail.com>
|
|
Date: Fri, 17 Jul 2020 15:16:31 +0200
|
|
Subject: phy: qualcomm: add qcom ipq806x dwc usb phy driver
|
|
|
|
This has lost in the original push for the dwc3 qcom driver.
|
|
This is needed for ipq806x SoC as without this the usb ports
|
|
doesn't work at all.
|
|
|
|
Signed-off-by: Andy Gross <agross@codeaurora.org>
|
|
Signed-off-by: Ansuel Smith <ansuelsmth@gmail.com>
|
|
Tested-by: Jonathan McDowell <noodles@earth.li>
|
|
Link: https://lore.kernel.org/r/20200717131635.11076-1-ansuelsmth@gmail.com
|
|
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
---
|
|
|
|
Light modification to Kconfig as some config are missing in kernel 5.4
|
|
|
|
drivers/phy/qualcomm/Kconfig | 10 +
|
|
drivers/phy/qualcomm/Makefile | 1 +
|
|
drivers/phy/qualcomm/phy-qcom-ipq806x-usb.c | 571 ++++++++++++++++++++++++++++
|
|
3 files changed, 582 insertions(+)
|
|
create mode 100644 drivers/phy/qualcomm/phy-qcom-ipq806x-usb.c
|
|
|
|
--- a/drivers/phy/qualcomm/Kconfig
|
|
+++ b/drivers/phy/qualcomm/Kconfig
|
|
@@ -91,3 +91,13 @@ config PHY_QCOM_USB_HSIC
|
|
select GENERIC_PHY
|
|
help
|
|
Support for the USB HSIC ULPI compliant PHY on QCOM chipsets.
|
|
+
|
|
+config PHY_QCOM_IPQ806X_USB
|
|
+ tristate "Qualcomm IPQ806x DWC3 USB PHY driver"
|
|
+ depends on HAS_IOMEM
|
|
+ depends on OF && (ARCH_QCOM || COMPILE_TEST)
|
|
+ select GENERIC_PHY
|
|
+ help
|
|
+ This option enables support for the Synopsis PHYs present inside the
|
|
+ Qualcomm USB3.0 DWC3 controller on ipq806x SoC. This driver supports
|
|
+ both HS and SS PHY controllers.
|
|
--- a/drivers/phy/qualcomm/Makefile
|
|
+++ b/drivers/phy/qualcomm/Makefile
|
|
@@ -10,3 +10,4 @@ obj-$(CONFIG_PHY_QCOM_UFS_14NM) += phy-
|
|
obj-$(CONFIG_PHY_QCOM_UFS_20NM) += phy-qcom-ufs-qmp-20nm.o
|
|
obj-$(CONFIG_PHY_QCOM_USB_HS) += phy-qcom-usb-hs.o
|
|
obj-$(CONFIG_PHY_QCOM_USB_HSIC) += phy-qcom-usb-hsic.o
|
|
+obj-$(CONFIG_PHY_QCOM_IPQ806X_USB) += phy-qcom-ipq806x-usb.o
|
|
--- /dev/null
|
|
+++ b/drivers/phy/qualcomm/phy-qcom-ipq806x-usb.c
|
|
@@ -0,0 +1,571 @@
|
|
+// SPDX-License-Identifier: GPL-2.0-only
|
|
+
|
|
+#include <linux/clk.h>
|
|
+#include <linux/err.h>
|
|
+#include <linux/io.h>
|
|
+#include <linux/module.h>
|
|
+#include <linux/of_device.h>
|
|
+#include <linux/phy/phy.h>
|
|
+#include <linux/platform_device.h>
|
|
+#include <linux/delay.h>
|
|
+#include <linux/regmap.h>
|
|
+#include <linux/mfd/syscon.h>
|
|
+
|
|
+/* USB QSCRATCH Hardware registers */
|
|
+#define QSCRATCH_GENERAL_CFG (0x08)
|
|
+#define HSUSB_PHY_CTRL_REG (0x10)
|
|
+
|
|
+/* PHY_CTRL_REG */
|
|
+#define HSUSB_CTRL_DMSEHV_CLAMP BIT(24)
|
|
+#define HSUSB_CTRL_USB2_SUSPEND BIT(23)
|
|
+#define HSUSB_CTRL_UTMI_CLK_EN BIT(21)
|
|
+#define HSUSB_CTRL_UTMI_OTG_VBUS_VALID BIT(20)
|
|
+#define HSUSB_CTRL_USE_CLKCORE BIT(18)
|
|
+#define HSUSB_CTRL_DPSEHV_CLAMP BIT(17)
|
|
+#define HSUSB_CTRL_COMMONONN BIT(11)
|
|
+#define HSUSB_CTRL_ID_HV_CLAMP BIT(9)
|
|
+#define HSUSB_CTRL_OTGSESSVLD_CLAMP BIT(8)
|
|
+#define HSUSB_CTRL_CLAMP_EN BIT(7)
|
|
+#define HSUSB_CTRL_RETENABLEN BIT(1)
|
|
+#define HSUSB_CTRL_POR BIT(0)
|
|
+
|
|
+/* QSCRATCH_GENERAL_CFG */
|
|
+#define HSUSB_GCFG_XHCI_REV BIT(2)
|
|
+
|
|
+/* USB QSCRATCH Hardware registers */
|
|
+#define SSUSB_PHY_CTRL_REG (0x00)
|
|
+#define SSUSB_PHY_PARAM_CTRL_1 (0x04)
|
|
+#define SSUSB_PHY_PARAM_CTRL_2 (0x08)
|
|
+#define CR_PROTOCOL_DATA_IN_REG (0x0c)
|
|
+#define CR_PROTOCOL_DATA_OUT_REG (0x10)
|
|
+#define CR_PROTOCOL_CAP_ADDR_REG (0x14)
|
|
+#define CR_PROTOCOL_CAP_DATA_REG (0x18)
|
|
+#define CR_PROTOCOL_READ_REG (0x1c)
|
|
+#define CR_PROTOCOL_WRITE_REG (0x20)
|
|
+
|
|
+/* PHY_CTRL_REG */
|
|
+#define SSUSB_CTRL_REF_USE_PAD BIT(28)
|
|
+#define SSUSB_CTRL_TEST_POWERDOWN BIT(27)
|
|
+#define SSUSB_CTRL_LANE0_PWR_PRESENT BIT(24)
|
|
+#define SSUSB_CTRL_SS_PHY_EN BIT(8)
|
|
+#define SSUSB_CTRL_SS_PHY_RESET BIT(7)
|
|
+
|
|
+/* SSPHY control registers - Does this need 0x30? */
|
|
+#define SSPHY_CTRL_RX_OVRD_IN_HI(lane) (0x1006 + 0x100 * (lane))
|
|
+#define SSPHY_CTRL_TX_OVRD_DRV_LO(lane) (0x1002 + 0x100 * (lane))
|
|
+
|
|
+/* SSPHY SoC version specific values */
|
|
+#define SSPHY_RX_EQ_VALUE 4 /* Override value for rx_eq */
|
|
+/* Override value for transmit preemphasis */
|
|
+#define SSPHY_TX_DEEMPH_3_5DB 23
|
|
+/* Override value for mpll */
|
|
+#define SSPHY_MPLL_VALUE 0
|
|
+
|
|
+/* QSCRATCH PHY_PARAM_CTRL1 fields */
|
|
+#define PHY_PARAM_CTRL1_TX_FULL_SWING_MASK GENMASK(26, 19)
|
|
+#define PHY_PARAM_CTRL1_TX_DEEMPH_6DB_MASK GENMASK(19, 13)
|
|
+#define PHY_PARAM_CTRL1_TX_DEEMPH_3_5DB_MASK GENMASK(13, 7)
|
|
+#define PHY_PARAM_CTRL1_LOS_BIAS_MASK GENMASK(7, 2)
|
|
+
|
|
+#define PHY_PARAM_CTRL1_MASK \
|
|
+ (PHY_PARAM_CTRL1_TX_FULL_SWING_MASK | \
|
|
+ PHY_PARAM_CTRL1_TX_DEEMPH_6DB_MASK | \
|
|
+ PHY_PARAM_CTRL1_TX_DEEMPH_3_5DB_MASK | \
|
|
+ PHY_PARAM_CTRL1_LOS_BIAS_MASK)
|
|
+
|
|
+#define PHY_PARAM_CTRL1_TX_FULL_SWING(x) \
|
|
+ (((x) << 20) & PHY_PARAM_CTRL1_TX_FULL_SWING_MASK)
|
|
+#define PHY_PARAM_CTRL1_TX_DEEMPH_6DB(x) \
|
|
+ (((x) << 14) & PHY_PARAM_CTRL1_TX_DEEMPH_6DB_MASK)
|
|
+#define PHY_PARAM_CTRL1_TX_DEEMPH_3_5DB(x) \
|
|
+ (((x) << 8) & PHY_PARAM_CTRL1_TX_DEEMPH_3_5DB_MASK)
|
|
+#define PHY_PARAM_CTRL1_LOS_BIAS(x) \
|
|
+ (((x) << 3) & PHY_PARAM_CTRL1_LOS_BIAS_MASK)
|
|
+
|
|
+/* RX OVRD IN HI bits */
|
|
+#define RX_OVRD_IN_HI_RX_RESET_OVRD BIT(13)
|
|
+#define RX_OVRD_IN_HI_RX_RX_RESET BIT(12)
|
|
+#define RX_OVRD_IN_HI_RX_EQ_OVRD BIT(11)
|
|
+#define RX_OVRD_IN_HI_RX_EQ_MASK GENMASK(10, 7)
|
|
+#define RX_OVRD_IN_HI_RX_EQ(x) ((x) << 8)
|
|
+#define RX_OVRD_IN_HI_RX_EQ_EN_OVRD BIT(7)
|
|
+#define RX_OVRD_IN_HI_RX_EQ_EN BIT(6)
|
|
+#define RX_OVRD_IN_HI_RX_LOS_FILTER_OVRD BIT(5)
|
|
+#define RX_OVRD_IN_HI_RX_LOS_FILTER_MASK GENMASK(4, 2)
|
|
+#define RX_OVRD_IN_HI_RX_RATE_OVRD BIT(2)
|
|
+#define RX_OVRD_IN_HI_RX_RATE_MASK GENMASK(2, 0)
|
|
+
|
|
+/* TX OVRD DRV LO register bits */
|
|
+#define TX_OVRD_DRV_LO_AMPLITUDE_MASK GENMASK(6, 0)
|
|
+#define TX_OVRD_DRV_LO_PREEMPH_MASK GENMASK(13, 6)
|
|
+#define TX_OVRD_DRV_LO_PREEMPH(x) ((x) << 7)
|
|
+#define TX_OVRD_DRV_LO_EN BIT(14)
|
|
+
|
|
+/* MPLL bits */
|
|
+#define SSPHY_MPLL_MASK GENMASK(8, 5)
|
|
+#define SSPHY_MPLL(x) ((x) << 5)
|
|
+
|
|
+/* SS CAP register bits */
|
|
+#define SS_CR_CAP_ADDR_REG BIT(0)
|
|
+#define SS_CR_CAP_DATA_REG BIT(0)
|
|
+#define SS_CR_READ_REG BIT(0)
|
|
+#define SS_CR_WRITE_REG BIT(0)
|
|
+
|
|
+struct usb_phy {
|
|
+ void __iomem *base;
|
|
+ struct device *dev;
|
|
+ struct clk *xo_clk;
|
|
+ struct clk *ref_clk;
|
|
+ u32 rx_eq;
|
|
+ u32 tx_deamp_3_5db;
|
|
+ u32 mpll;
|
|
+};
|
|
+
|
|
+struct phy_drvdata {
|
|
+ struct phy_ops ops;
|
|
+ u32 clk_rate;
|
|
+};
|
|
+
|
|
+/**
|
|
+ * Write register and read back masked value to confirm it is written
|
|
+ *
|
|
+ * @base - QCOM DWC3 PHY base virtual address.
|
|
+ * @offset - register offset.
|
|
+ * @mask - register bitmask specifying what should be updated
|
|
+ * @val - value to write.
|
|
+ */
|
|
+static inline void usb_phy_write_readback(struct usb_phy *phy_dwc3,
|
|
+ u32 offset,
|
|
+ const u32 mask, u32 val)
|
|
+{
|
|
+ u32 write_val, tmp = readl(phy_dwc3->base + offset);
|
|
+
|
|
+ tmp &= ~mask; /* retain other bits */
|
|
+ write_val = tmp | val;
|
|
+
|
|
+ writel(write_val, phy_dwc3->base + offset);
|
|
+
|
|
+ /* Read back to see if val was written */
|
|
+ tmp = readl(phy_dwc3->base + offset);
|
|
+ tmp &= mask; /* clear other bits */
|
|
+
|
|
+ if (tmp != val)
|
|
+ dev_err(phy_dwc3->dev, "write: %x to QSCRATCH: %x FAILED\n", val, offset);
|
|
+}
|
|
+
|
|
+static int wait_for_latch(void __iomem *addr)
|
|
+{
|
|
+ u32 retry = 10;
|
|
+
|
|
+ while (true) {
|
|
+ if (!readl(addr))
|
|
+ break;
|
|
+
|
|
+ if (--retry == 0)
|
|
+ return -ETIMEDOUT;
|
|
+
|
|
+ usleep_range(10, 20);
|
|
+ }
|
|
+
|
|
+ return 0;
|
|
+}
|
|
+
|
|
+/**
|
|
+ * Write SSPHY register
|
|
+ *
|
|
+ * @base - QCOM DWC3 PHY base virtual address.
|
|
+ * @addr - SSPHY address to write.
|
|
+ * @val - value to write.
|
|
+ */
|
|
+static int usb_ss_write_phycreg(struct usb_phy *phy_dwc3,
|
|
+ u32 addr, u32 val)
|
|
+{
|
|
+ int ret;
|
|
+
|
|
+ writel(addr, phy_dwc3->base + CR_PROTOCOL_DATA_IN_REG);
|
|
+ writel(SS_CR_CAP_ADDR_REG,
|
|
+ phy_dwc3->base + CR_PROTOCOL_CAP_ADDR_REG);
|
|
+
|
|
+ ret = wait_for_latch(phy_dwc3->base + CR_PROTOCOL_CAP_ADDR_REG);
|
|
+ if (ret)
|
|
+ goto err_wait;
|
|
+
|
|
+ writel(val, phy_dwc3->base + CR_PROTOCOL_DATA_IN_REG);
|
|
+ writel(SS_CR_CAP_DATA_REG,
|
|
+ phy_dwc3->base + CR_PROTOCOL_CAP_DATA_REG);
|
|
+
|
|
+ ret = wait_for_latch(phy_dwc3->base + CR_PROTOCOL_CAP_DATA_REG);
|
|
+ if (ret)
|
|
+ goto err_wait;
|
|
+
|
|
+ writel(SS_CR_WRITE_REG, phy_dwc3->base + CR_PROTOCOL_WRITE_REG);
|
|
+
|
|
+ ret = wait_for_latch(phy_dwc3->base + CR_PROTOCOL_WRITE_REG);
|
|
+
|
|
+err_wait:
|
|
+ if (ret)
|
|
+ dev_err(phy_dwc3->dev, "timeout waiting for latch\n");
|
|
+ return ret;
|
|
+}
|
|
+
|
|
+/**
|
|
+ * Read SSPHY register.
|
|
+ *
|
|
+ * @base - QCOM DWC3 PHY base virtual address.
|
|
+ * @addr - SSPHY address to read.
|
|
+ */
|
|
+static int usb_ss_read_phycreg(struct usb_phy *phy_dwc3,
|
|
+ u32 addr, u32 *val)
|
|
+{
|
|
+ int ret;
|
|
+
|
|
+ writel(addr, phy_dwc3->base + CR_PROTOCOL_DATA_IN_REG);
|
|
+ writel(SS_CR_CAP_ADDR_REG,
|
|
+ phy_dwc3->base + CR_PROTOCOL_CAP_ADDR_REG);
|
|
+
|
|
+ ret = wait_for_latch(phy_dwc3->base + CR_PROTOCOL_CAP_ADDR_REG);
|
|
+ if (ret)
|
|
+ goto err_wait;
|
|
+
|
|
+ /*
|
|
+ * Due to hardware bug, first read of SSPHY register might be
|
|
+ * incorrect. Hence as workaround, SW should perform SSPHY register
|
|
+ * read twice, but use only second read and ignore first read.
|
|
+ */
|
|
+ writel(SS_CR_READ_REG, phy_dwc3->base + CR_PROTOCOL_READ_REG);
|
|
+
|
|
+ ret = wait_for_latch(phy_dwc3->base + CR_PROTOCOL_READ_REG);
|
|
+ if (ret)
|
|
+ goto err_wait;
|
|
+
|
|
+ /* throwaway read */
|
|
+ readl(phy_dwc3->base + CR_PROTOCOL_DATA_OUT_REG);
|
|
+
|
|
+ writel(SS_CR_READ_REG, phy_dwc3->base + CR_PROTOCOL_READ_REG);
|
|
+
|
|
+ ret = wait_for_latch(phy_dwc3->base + CR_PROTOCOL_READ_REG);
|
|
+ if (ret)
|
|
+ goto err_wait;
|
|
+
|
|
+ *val = readl(phy_dwc3->base + CR_PROTOCOL_DATA_OUT_REG);
|
|
+
|
|
+err_wait:
|
|
+ return ret;
|
|
+}
|
|
+
|
|
+static int qcom_ipq806x_usb_hs_phy_init(struct phy *phy)
|
|
+{
|
|
+ struct usb_phy *phy_dwc3 = phy_get_drvdata(phy);
|
|
+ int ret;
|
|
+ u32 val;
|
|
+
|
|
+ ret = clk_prepare_enable(phy_dwc3->xo_clk);
|
|
+ if (ret)
|
|
+ return ret;
|
|
+
|
|
+ ret = clk_prepare_enable(phy_dwc3->ref_clk);
|
|
+ if (ret) {
|
|
+ clk_disable_unprepare(phy_dwc3->xo_clk);
|
|
+ return ret;
|
|
+ }
|
|
+
|
|
+ /*
|
|
+ * HSPHY Initialization: Enable UTMI clock, select 19.2MHz fsel
|
|
+ * enable clamping, and disable RETENTION (power-on default is ENABLED)
|
|
+ */
|
|
+ val = HSUSB_CTRL_DPSEHV_CLAMP | HSUSB_CTRL_DMSEHV_CLAMP |
|
|
+ HSUSB_CTRL_RETENABLEN | HSUSB_CTRL_COMMONONN |
|
|
+ HSUSB_CTRL_OTGSESSVLD_CLAMP | HSUSB_CTRL_ID_HV_CLAMP |
|
|
+ HSUSB_CTRL_DPSEHV_CLAMP | HSUSB_CTRL_UTMI_OTG_VBUS_VALID |
|
|
+ HSUSB_CTRL_UTMI_CLK_EN | HSUSB_CTRL_CLAMP_EN | 0x70;
|
|
+
|
|
+ /* use core clock if external reference is not present */
|
|
+ if (!phy_dwc3->xo_clk)
|
|
+ val |= HSUSB_CTRL_USE_CLKCORE;
|
|
+
|
|
+ writel(val, phy_dwc3->base + HSUSB_PHY_CTRL_REG);
|
|
+ usleep_range(2000, 2200);
|
|
+
|
|
+ /* Disable (bypass) VBUS and ID filters */
|
|
+ writel(HSUSB_GCFG_XHCI_REV, phy_dwc3->base + QSCRATCH_GENERAL_CFG);
|
|
+
|
|
+ return 0;
|
|
+}
|
|
+
|
|
+static int qcom_ipq806x_usb_hs_phy_exit(struct phy *phy)
|
|
+{
|
|
+ struct usb_phy *phy_dwc3 = phy_get_drvdata(phy);
|
|
+
|
|
+ clk_disable_unprepare(phy_dwc3->ref_clk);
|
|
+ clk_disable_unprepare(phy_dwc3->xo_clk);
|
|
+
|
|
+ return 0;
|
|
+}
|
|
+
|
|
+static int qcom_ipq806x_usb_ss_phy_init(struct phy *phy)
|
|
+{
|
|
+ struct usb_phy *phy_dwc3 = phy_get_drvdata(phy);
|
|
+ int ret;
|
|
+ u32 data;
|
|
+
|
|
+ ret = clk_prepare_enable(phy_dwc3->xo_clk);
|
|
+ if (ret)
|
|
+ return ret;
|
|
+
|
|
+ ret = clk_prepare_enable(phy_dwc3->ref_clk);
|
|
+ if (ret) {
|
|
+ clk_disable_unprepare(phy_dwc3->xo_clk);
|
|
+ return ret;
|
|
+ }
|
|
+
|
|
+ /* reset phy */
|
|
+ data = readl(phy_dwc3->base + SSUSB_PHY_CTRL_REG);
|
|
+ writel(data | SSUSB_CTRL_SS_PHY_RESET,
|
|
+ phy_dwc3->base + SSUSB_PHY_CTRL_REG);
|
|
+ usleep_range(2000, 2200);
|
|
+ writel(data, phy_dwc3->base + SSUSB_PHY_CTRL_REG);
|
|
+
|
|
+ /* clear REF_PAD if we don't have XO clk */
|
|
+ if (!phy_dwc3->xo_clk)
|
|
+ data &= ~SSUSB_CTRL_REF_USE_PAD;
|
|
+ else
|
|
+ data |= SSUSB_CTRL_REF_USE_PAD;
|
|
+
|
|
+ writel(data, phy_dwc3->base + SSUSB_PHY_CTRL_REG);
|
|
+
|
|
+ /* wait for ref clk to become stable, this can take up to 30ms */
|
|
+ msleep(30);
|
|
+
|
|
+ data |= SSUSB_CTRL_SS_PHY_EN | SSUSB_CTRL_LANE0_PWR_PRESENT;
|
|
+ writel(data, phy_dwc3->base + SSUSB_PHY_CTRL_REG);
|
|
+
|
|
+ /*
|
|
+ * WORKAROUND: There is SSPHY suspend bug due to which USB enumerates
|
|
+ * in HS mode instead of SS mode. Workaround it by asserting
|
|
+ * LANE0.TX_ALT_BLOCK.EN_ALT_BUS to enable TX to use alt bus mode
|
|
+ */
|
|
+ ret = usb_ss_read_phycreg(phy_dwc3, 0x102D, &data);
|
|
+ if (ret)
|
|
+ goto err_phy_trans;
|
|
+
|
|
+ data |= (1 << 7);
|
|
+ ret = usb_ss_write_phycreg(phy_dwc3, 0x102D, data);
|
|
+ if (ret)
|
|
+ goto err_phy_trans;
|
|
+
|
|
+ ret = usb_ss_read_phycreg(phy_dwc3, 0x1010, &data);
|
|
+ if (ret)
|
|
+ goto err_phy_trans;
|
|
+
|
|
+ data &= ~0xff0;
|
|
+ data |= 0x20;
|
|
+ ret = usb_ss_write_phycreg(phy_dwc3, 0x1010, data);
|
|
+ if (ret)
|
|
+ goto err_phy_trans;
|
|
+
|
|
+ /*
|
|
+ * Fix RX Equalization setting as follows
|
|
+ * LANE0.RX_OVRD_IN_HI. RX_EQ_EN set to 0
|
|
+ * LANE0.RX_OVRD_IN_HI.RX_EQ_EN_OVRD set to 1
|
|
+ * LANE0.RX_OVRD_IN_HI.RX_EQ set based on SoC version
|
|
+ * LANE0.RX_OVRD_IN_HI.RX_EQ_OVRD set to 1
|
|
+ */
|
|
+ ret = usb_ss_read_phycreg(phy_dwc3, SSPHY_CTRL_RX_OVRD_IN_HI(0), &data);
|
|
+ if (ret)
|
|
+ goto err_phy_trans;
|
|
+
|
|
+ data &= ~RX_OVRD_IN_HI_RX_EQ_EN;
|
|
+ data |= RX_OVRD_IN_HI_RX_EQ_EN_OVRD;
|
|
+ data &= ~RX_OVRD_IN_HI_RX_EQ_MASK;
|
|
+ data |= RX_OVRD_IN_HI_RX_EQ(phy_dwc3->rx_eq);
|
|
+ data |= RX_OVRD_IN_HI_RX_EQ_OVRD;
|
|
+ ret = usb_ss_write_phycreg(phy_dwc3,
|
|
+ SSPHY_CTRL_RX_OVRD_IN_HI(0), data);
|
|
+ if (ret)
|
|
+ goto err_phy_trans;
|
|
+
|
|
+ /*
|
|
+ * Set EQ and TX launch amplitudes as follows
|
|
+ * LANE0.TX_OVRD_DRV_LO.PREEMPH set based on SoC version
|
|
+ * LANE0.TX_OVRD_DRV_LO.AMPLITUDE set to 110
|
|
+ * LANE0.TX_OVRD_DRV_LO.EN set to 1.
|
|
+ */
|
|
+ ret = usb_ss_read_phycreg(phy_dwc3,
|
|
+ SSPHY_CTRL_TX_OVRD_DRV_LO(0), &data);
|
|
+ if (ret)
|
|
+ goto err_phy_trans;
|
|
+
|
|
+ data &= ~TX_OVRD_DRV_LO_PREEMPH_MASK;
|
|
+ data |= TX_OVRD_DRV_LO_PREEMPH(phy_dwc3->tx_deamp_3_5db);
|
|
+ data &= ~TX_OVRD_DRV_LO_AMPLITUDE_MASK;
|
|
+ data |= 0x6E;
|
|
+ data |= TX_OVRD_DRV_LO_EN;
|
|
+ ret = usb_ss_write_phycreg(phy_dwc3,
|
|
+ SSPHY_CTRL_TX_OVRD_DRV_LO(0), data);
|
|
+ if (ret)
|
|
+ goto err_phy_trans;
|
|
+
|
|
+ data = 0;
|
|
+ data &= ~SSPHY_MPLL_MASK;
|
|
+ data |= SSPHY_MPLL(phy_dwc3->mpll);
|
|
+ usb_ss_write_phycreg(phy_dwc3, 0x30, data);
|
|
+
|
|
+ /*
|
|
+ * Set the QSCRATCH PHY_PARAM_CTRL1 parameters as follows
|
|
+ * TX_FULL_SWING [26:20] amplitude to 110
|
|
+ * TX_DEEMPH_6DB [19:14] to 32
|
|
+ * TX_DEEMPH_3_5DB [13:8] set based on SoC version
|
|
+ * LOS_BIAS [7:3] to 9
|
|
+ */
|
|
+ data = readl(phy_dwc3->base + SSUSB_PHY_PARAM_CTRL_1);
|
|
+
|
|
+ data &= ~PHY_PARAM_CTRL1_MASK;
|
|
+
|
|
+ data |= PHY_PARAM_CTRL1_TX_FULL_SWING(0x6e) |
|
|
+ PHY_PARAM_CTRL1_TX_DEEMPH_6DB(0x20) |
|
|
+ PHY_PARAM_CTRL1_TX_DEEMPH_3_5DB(phy_dwc3->tx_deamp_3_5db) |
|
|
+ PHY_PARAM_CTRL1_LOS_BIAS(0x9);
|
|
+
|
|
+ usb_phy_write_readback(phy_dwc3, SSUSB_PHY_PARAM_CTRL_1,
|
|
+ PHY_PARAM_CTRL1_MASK, data);
|
|
+
|
|
+err_phy_trans:
|
|
+ return ret;
|
|
+}
|
|
+
|
|
+static int qcom_ipq806x_usb_ss_phy_exit(struct phy *phy)
|
|
+{
|
|
+ struct usb_phy *phy_dwc3 = phy_get_drvdata(phy);
|
|
+
|
|
+ /* Sequence to put SSPHY in low power state:
|
|
+ * 1. Clear REF_PHY_EN in PHY_CTRL_REG
|
|
+ * 2. Clear REF_USE_PAD in PHY_CTRL_REG
|
|
+ * 3. Set TEST_POWERED_DOWN in PHY_CTRL_REG to enable PHY retention
|
|
+ */
|
|
+ usb_phy_write_readback(phy_dwc3, SSUSB_PHY_CTRL_REG,
|
|
+ SSUSB_CTRL_SS_PHY_EN, 0x0);
|
|
+ usb_phy_write_readback(phy_dwc3, SSUSB_PHY_CTRL_REG,
|
|
+ SSUSB_CTRL_REF_USE_PAD, 0x0);
|
|
+ usb_phy_write_readback(phy_dwc3, SSUSB_PHY_CTRL_REG,
|
|
+ SSUSB_CTRL_TEST_POWERDOWN, 0x0);
|
|
+
|
|
+ clk_disable_unprepare(phy_dwc3->ref_clk);
|
|
+ clk_disable_unprepare(phy_dwc3->xo_clk);
|
|
+
|
|
+ return 0;
|
|
+}
|
|
+
|
|
+static const struct phy_drvdata qcom_ipq806x_usb_hs_drvdata = {
|
|
+ .ops = {
|
|
+ .init = qcom_ipq806x_usb_hs_phy_init,
|
|
+ .exit = qcom_ipq806x_usb_hs_phy_exit,
|
|
+ .owner = THIS_MODULE,
|
|
+ },
|
|
+ .clk_rate = 60000000,
|
|
+};
|
|
+
|
|
+static const struct phy_drvdata qcom_ipq806x_usb_ss_drvdata = {
|
|
+ .ops = {
|
|
+ .init = qcom_ipq806x_usb_ss_phy_init,
|
|
+ .exit = qcom_ipq806x_usb_ss_phy_exit,
|
|
+ .owner = THIS_MODULE,
|
|
+ },
|
|
+ .clk_rate = 125000000,
|
|
+};
|
|
+
|
|
+static const struct of_device_id qcom_ipq806x_usb_phy_table[] = {
|
|
+ { .compatible = "qcom,ipq806x-usb-phy-hs",
|
|
+ .data = &qcom_ipq806x_usb_hs_drvdata },
|
|
+ { .compatible = "qcom,ipq806x-usb-phy-ss",
|
|
+ .data = &qcom_ipq806x_usb_ss_drvdata },
|
|
+ { /* Sentinel */ }
|
|
+};
|
|
+MODULE_DEVICE_TABLE(of, qcom_ipq806x_usb_phy_table);
|
|
+
|
|
+static int qcom_ipq806x_usb_phy_probe(struct platform_device *pdev)
|
|
+{
|
|
+ struct resource *res;
|
|
+ resource_size_t size;
|
|
+ struct phy *generic_phy;
|
|
+ struct usb_phy *phy_dwc3;
|
|
+ const struct phy_drvdata *data;
|
|
+ struct phy_provider *phy_provider;
|
|
+
|
|
+ phy_dwc3 = devm_kzalloc(&pdev->dev, sizeof(*phy_dwc3), GFP_KERNEL);
|
|
+ if (!phy_dwc3)
|
|
+ return -ENOMEM;
|
|
+
|
|
+ data = of_device_get_match_data(&pdev->dev);
|
|
+
|
|
+ phy_dwc3->dev = &pdev->dev;
|
|
+
|
|
+ res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
|
|
+ if (!res)
|
|
+ return -EINVAL;
|
|
+ size = resource_size(res);
|
|
+ phy_dwc3->base = devm_ioremap(phy_dwc3->dev, res->start, size);
|
|
+
|
|
+ if (IS_ERR(phy_dwc3->base)) {
|
|
+ dev_err(phy_dwc3->dev, "failed to map reg\n");
|
|
+ return PTR_ERR(phy_dwc3->base);
|
|
+ }
|
|
+
|
|
+ phy_dwc3->ref_clk = devm_clk_get(phy_dwc3->dev, "ref");
|
|
+ if (IS_ERR(phy_dwc3->ref_clk)) {
|
|
+ dev_dbg(phy_dwc3->dev, "cannot get reference clock\n");
|
|
+ return PTR_ERR(phy_dwc3->ref_clk);
|
|
+ }
|
|
+
|
|
+ clk_set_rate(phy_dwc3->ref_clk, data->clk_rate);
|
|
+
|
|
+ phy_dwc3->xo_clk = devm_clk_get(phy_dwc3->dev, "xo");
|
|
+ if (IS_ERR(phy_dwc3->xo_clk)) {
|
|
+ dev_dbg(phy_dwc3->dev, "cannot get TCXO clock\n");
|
|
+ phy_dwc3->xo_clk = NULL;
|
|
+ }
|
|
+
|
|
+ /* Parse device node to probe HSIO settings */
|
|
+ if (device_property_read_u32(&pdev->dev, "qcom,rx-eq",
|
|
+ &phy_dwc3->rx_eq))
|
|
+ phy_dwc3->rx_eq = SSPHY_RX_EQ_VALUE;
|
|
+
|
|
+ if (device_property_read_u32(&pdev->dev, "qcom,tx-deamp_3_5db",
|
|
+ &phy_dwc3->tx_deamp_3_5db))
|
|
+ phy_dwc3->rx_eq = SSPHY_TX_DEEMPH_3_5DB;
|
|
+
|
|
+ if (device_property_read_u32(&pdev->dev, "qcom,mpll", &phy_dwc3->mpll))
|
|
+ phy_dwc3->mpll = SSPHY_MPLL_VALUE;
|
|
+
|
|
+ generic_phy = devm_phy_create(phy_dwc3->dev, pdev->dev.of_node, &data->ops);
|
|
+
|
|
+ if (IS_ERR(generic_phy))
|
|
+ return PTR_ERR(generic_phy);
|
|
+
|
|
+ phy_set_drvdata(generic_phy, phy_dwc3);
|
|
+ platform_set_drvdata(pdev, phy_dwc3);
|
|
+
|
|
+ phy_provider = devm_of_phy_provider_register(phy_dwc3->dev,
|
|
+ of_phy_simple_xlate);
|
|
+
|
|
+ if (IS_ERR(phy_provider))
|
|
+ return PTR_ERR(phy_provider);
|
|
+
|
|
+ return 0;
|
|
+}
|
|
+
|
|
+static struct platform_driver qcom_ipq806x_usb_phy_driver = {
|
|
+ .probe = qcom_ipq806x_usb_phy_probe,
|
|
+ .driver = {
|
|
+ .name = "qcom-ipq806x-usb-phy",
|
|
+ .owner = THIS_MODULE,
|
|
+ .of_match_table = qcom_ipq806x_usb_phy_table,
|
|
+ },
|
|
+};
|
|
+
|
|
+module_platform_driver(qcom_ipq806x_usb_phy_driver);
|
|
+
|
|
+MODULE_ALIAS("platform:phy-qcom-ipq806x-usb");
|
|
+MODULE_LICENSE("GPL v2");
|
|
+MODULE_AUTHOR("Andy Gross <agross@codeaurora.org>");
|
|
+MODULE_AUTHOR("Ivan T. Ivanov <iivanov@mm-sol.com>");
|
|
+MODULE_DESCRIPTION("DesignWare USB3 QCOM PHY driver");
|