Jackson Lim 209b368254 ath79: add support for D-Link DIR-842 C2 ... Hardware spec of DIR-842 C2: SoC: QCA9563 DRAM: 128MB DDR2 Flash: 16MB SPI-NOR Switch: QCA8337N WiFi 5.8GHz: QCA9888 WiFi 2.4Ghz: QCA9563 USB: 2.0 Flash instructions: 1. Upgrade the factory.bin through the factory web interface or the u-boot failsafe interface. The firmware will boot up correctly for the first time. Do not power off the device after OpenWrt has booted. Otherwise the u-boot will enter failsafe mode as the checksum of the firmware has been changed. 2. Upgrade the sysupgrade.bin in OpenWrt. After upgrading completes the u-boot won't complain about the firmware checksum and it's OK to use now. 3. If you powered off the device before upgrading the sysupgrade.bin, just upgrade the factory.bin through the u-boot failsafe interface and then goto step 2. Signed-off-by: Jackson Lim <jackcolentern@gmail.com> [Reword reset-hog comment, fix formatting] Signed-off-by: David Bauer <mail@david-bauer.net>		2019-07-24 11:36:02 +02:00
..
board.d	ath79: add support for D-Link DIR-842 C2	2019-07-24 11:36:02 +02:00
hotplug.d	ath79: add support for D-Link DIR-842 C2	2019-07-24 11:36:02 +02:00
init.d	ath79: add support for Qihoo C301	2019-07-16 09:51:03 +08:00
uci-defaults	ath79: add support for TP-Link RE355 v1 and RE450 v1	2019-07-17 23:14:23 +02:00