openwrt/target/linux/bcm53xx/patches-5.10/035-v5.18-0001-ARM-dts-BCM5301X-define-RTL8365MB-switch-on-Asus-RT-.patch
Rafał Miłecki a79a21b509 bcm53xx: backport DT changes from 5.17 & 5.18
Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
(cherry picked from commit a721fb9f83)
2022-09-01 12:46:37 +02:00

104 lines
2.2 KiB
Diff
Raw Blame History

This file contains ambiguous Unicode characters

This file contains Unicode characters that might be confused with other characters. If you think that this is intentional, you can safely ignore this warning. Use the Escape button to reveal them.

From 441d531ec9b766f49e01c107a3043235daa4493f Mon Sep 17 00:00:00 2001
From: =?UTF-8?q?Ar=C4=B1n=C3=A7=20=C3=9CNAL?= <arinc.unal@arinc9.com>
Date: Sun, 2 Jan 2022 23:33:04 +0300
Subject: [PATCH] ARM: dts: BCM5301X: define RTL8365MB switch on Asus RT-AC88U
MIME-Version: 1.0
Content-Type: text/plain; charset=UTF-8
Content-Transfer-Encoding: 8bit
Define the Realtek RTL8365MB switch without interrupt support on the device
tree of Asus RT-AC88U.
Signed-off-by: Arınç ÜNAL <arinc.unal@arinc9.com>
Acked-by: Alvin Šipraga <alsi@bang-olufsen.dk>
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
---
arch/arm/boot/dts/bcm47094-asus-rt-ac88u.dts | 76 ++++++++++++++++++++
1 file changed, 76 insertions(+)
--- a/arch/arm/boot/dts/bcm47094-asus-rt-ac88u.dts
+++ b/arch/arm/boot/dts/bcm47094-asus-rt-ac88u.dts
@@ -93,6 +93,82 @@
gpios = <&chipcommon 4 GPIO_ACTIVE_LOW>;
};
};
+
+ switch {
+ compatible = "realtek,rtl8365mb";
+ /* 7 = MDIO (has input reads), 6 = MDC (clock, output only) */
+ mdc-gpios = <&chipcommon 6 GPIO_ACTIVE_HIGH>;
+ mdio-gpios = <&chipcommon 7 GPIO_ACTIVE_HIGH>;
+ reset-gpios = <&chipcommon 10 GPIO_ACTIVE_LOW>;
+ realtek,disable-leds;
+ dsa,member = <1 0>;
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
+ reg = <0>;
+ label = "lan5";
+ phy-handle = <&ethphy0>;
+ };
+
+ port@1 {
+ reg = <1>;
+ label = "lan6";
+ phy-handle = <&ethphy1>;
+ };
+
+ port@2 {
+ reg = <2>;
+ label = "lan7";
+ phy-handle = <&ethphy2>;
+ };
+
+ port@3 {
+ reg = <3>;
+ label = "lan8";
+ phy-handle = <&ethphy3>;
+ };
+
+ port@6 {
+ reg = <6>;
+ label = "cpu";
+ ethernet = <&sw0_p5>;
+ phy-mode = "rgmii";
+ tx-internal-delay-ps = <2000>;
+ rx-internal-delay-ps = <2100>;
+
+ fixed-link {
+ speed = <1000>;
+ full-duplex;
+ pause;
+ };
+ };
+ };
+
+ mdio {
+ compatible = "realtek,smi-mdio";
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ ethphy0: ethernet-phy@0 {
+ reg = <0>;
+ };
+
+ ethphy1: ethernet-phy@1 {
+ reg = <1>;
+ };
+
+ ethphy2: ethernet-phy@2 {
+ reg = <2>;
+ };
+
+ ethphy3: ethernet-phy@3 {
+ reg = <3>;
+ };
+ };
+ };
};
&srab {