openwrt/target/linux/ramips/image
Jan-Niklas Burfeind 6cd1035d8d ramips: add support for Wavlink WS-WN572HP3 4G
Wavlink WS-WN572HP3 4G is an 802.11ac
dual-band outdoor router with LTE support.

Specifications;
* Soc: MT7621DAT
* RAM: 128MiB
* Flash: NOR 16MiB GD-25Q128ESIG3
* Wi-Fi:
  * MT7613BEN: 5GHz
  * MT7603EN: 2.4GHz
* Ethernet: 2x 1GbE
* USB: None - only used internally
* LTE Modem: Quectel EC200T-EU
* UART: 115200 baud
* LEDs:
  * 7 blue at the front
    * 1 Power
    * 2 LAN / WAN
    * 1 Status
    * 3 RSSI (annotated 4G)
  * 1 green at the bottom (4G LED)
* Buttons: 1 reset button

Installation:
* press and hold the reset button while powering on the device
* keep it pressed for ten seconds
* connect to 192.168.10.1 via webbrowser (chromium/chrome works, at
  least Firefox 106.0.3 does not)
* upload the sysupgrade image, confirm the checksum, wait 2 minutes
  until the device reboots

Revert to stock firmware:
* same as installation but use the recovery image for WL-WN572HP3

Signed-off-by: Jan-Niklas Burfeind <git@aiyionpri.me>
Acked-by: Arınç ÜNAL <arinc.unal@arinc9.com>
(cherry picked from commit dce66899bf)
2022-12-09 00:19:44 +01:00
..
lzma-loader ramips: lzma-loader: make FLASH_START configurable 2020-09-03 14:15:30 +02:00
common-tp-link.mk treewide: call check-size before append-metadata 2021-07-10 19:40:10 +02:00
Makefile ramips: define lzma-loader recipe for SEAMA devices 2022-11-12 21:55:11 +01:00
mt76x8.mk ramips: Add Xiaomi Mi Router 4A 100M International 2022-08-09 21:22:41 +02:00
mt7620.mk ramips: improve compatibility for Youku YK-L2 and YK-L1 series 2022-11-12 21:55:11 +01:00
mt7621.mk ramips: add support for Wavlink WS-WN572HP3 4G 2022-12-09 00:19:44 +01:00
rt288x.mk ramips: tidy up image subtarget Makefiles 2020-05-08 18:58:39 +02:00
rt305x.mk ramips: fix booting on ZyXEL NBG-419N v2 2022-06-20 11:08:36 +02:00
rt3883.mk ramips: rt3883: use seama-lzma-loader for D-Link DIR-645 2022-11-12 21:55:11 +01:00