openwrt/target/linux/ramips/dts/mt7628an_wavlink_wl-wn576a2.dts
Thomas Aldrian b28443f82e ramips: add support for Wavlink WL-WN576A2
This commit adds support for the Wavlink WL-WN576A2 wall-plug wireles
repeater / router. It is also sold under the name SilverCrest SWV 733 B1.

Device specs:

- CPU: MediaTek MT7628AN
- Flash: 8MB
- RAM: 64MB
- Bootloader: U-Boot
- Ethernet: 1x 10/100 Mbps
- 2.4 GHz: b/g/n SoC
- 5 GHz: a/n/ac MT7610EN
- Buttons: WPS, reset, sliding switch (ap/repeater)
- LEDs: 5x wifi status, 1x LAN/WAN, 1x WPS

Flashing:

U-Boot launches a TFTP client if WPS button is held during boot.

- Server IP: 192.168.10.100
- Firmware file name: firmware.bin

Device will reboot automatically. First boot takes about 90s.

Coelner (waenger@gmail.com) is the original author, but I have made some
fixes. He does not wish to sign off using his real name.

Signed-off-by: Thomas Aldrian <dev.aldrian@gmail.com>
2021-11-20 21:08:25 +01:00

185 lines
2.9 KiB
Plaintext

// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
#include "mt7628an.dtsi"
#include <dt-bindings/input/input.h>
#include <dt-bindings/gpio/gpio.h>
/ {
compatible = "wavlink,wl-wn576a2", "mediatek,mt7628an-soc";
model = "Wavlink WL-WN576A2";
aliases {
led-boot = &led_wps;
led-failsafe = &led_wps;
led-running = &led_wps;
led-upgrade = &led_wps;
};
keys {
compatible = "gpio-keys";
reset {
label = "reset";
gpios = <&gpio 43 GPIO_ACTIVE_LOW>;
linux,code = <KEY_RESTART>;
};
wps {
label = "wps";
gpios = <&gpio 38 GPIO_ACTIVE_LOW>;
linux,code = <KEY_WPS_BUTTON>;
};
ap {
label = "ap";
gpios = <&gpio 41 GPIO_ACTIVE_LOW>;
linux,code = <BTN_0>;
linux,input-type = <EV_SW>;
};
repeater {
label = "repeater";
gpios = <&gpio 42 GPIO_ACTIVE_LOW>;
linux,code = <BTN_1>;
linux,input-type = <EV_SW>;
};
};
leds {
compatible = "gpio-leds";
wifi-high {
label = "blue:wifi-high";
gpios = <&gpio 37 GPIO_ACTIVE_LOW>;
};
wifi-mediumhigh {
label = "blue:wifi-mediumhigh";
gpios = <&gpio 11 GPIO_ACTIVE_LOW>;
};
wifi-medium {
label = "blue:wifi-medium";
gpios = <&gpio 44 GPIO_ACTIVE_LOW>;
};
wifi-mediumlow {
label = "blue:wifi-mediumlow";
gpios = <&gpio 39 GPIO_ACTIVE_LOW>;
};
wifi-low {
label = "blue:wifi-low";
gpios = <&gpio 40 GPIO_ACTIVE_LOW>;
};
lan {
label = "blue:lan";
gpios = <&gpio 2 GPIO_ACTIVE_LOW>;
};
led_wps: wps {
label = "blue:wps";
gpios = <&gpio 4 GPIO_ACTIVE_LOW>;
};
};
};
&state_default {
gpio {
groups = "i2c", "i2s", "wdt", "wled_an", "p0led_an", "p1led_an",
"p2led_an", "p3led_an", "p4led_an", "refclk", "gpio";
function = "gpio";
};
};
&pcie {
status = "okay";
};
&pcie0 {
wifi@0,0 {
reg = <0x0000 0 0 0 0>;
mediatek,mtd-eeprom = <&factory 0x8000>;
ieee80211-freq-limit = <5000000 6000000>;
};
};
&spi0 {
status = "okay";
flash@0 {
compatible = "jedec,spi-nor";
reg = <0>;
spi-max-frequency = <40000000>;
partitions {
compatible = "fixed-partitions";
#address-cells = <1>;
#size-cells = <1>;
partition@0 {
label = "u-boot";
reg = <0x0 0x30000>;
read-only;
};
partition@30000 {
label = "u-boot-env";
reg = <0x30000 0x10000>;
read-only;
};
factory: partition@40000 {
label = "factory";
reg = <0x40000 0x10000>;
read-only;
};
partition@50000 {
compatible = "denx,uimage";
label = "firmware";
reg = <0x50000 0x7b0000>;
};
};
};
};
&wmac {
status = "okay";
mediatek,mtd-eeprom = <&factory 0x0>;
};
&ethernet {
nvmem-cells = <&macaddr_factory_28>;
nvmem-cells-names = "max-address";
};
&esw {
mediatek,portmap = <0x3f>;
};
&usbphy {
status = "disabled";
};
&ehci {
status = "disabled";
};
&ohci {
status = "disabled";
};
&factory {
compatible = "nvmem-cells";
#address-cells = <1>;
#size-cells = <1>;
macaddr_factory_28: macaddr@28 {
reg = <0x28 0x6>;
};
};