mirror of
https://github.com/openwrt/openwrt.git
synced 2024-12-27 17:18:59 +00:00
d41d9befb9
Add u-boot bootloader based on 2023.01 to support D1-based boards, currently: - Dongshan Nezha STU - LicheePi RV Dock - MangoPi MQ-Pro - Nezha D1 Signed-off-by: Zoltan HERPAI <wigyori@uid0.hu>
376 lines
11 KiB
Diff
376 lines
11 KiB
Diff
From 697eb56ed8c9b3814ddbd87ae0c6e749ccafc9e3 Mon Sep 17 00:00:00 2001
|
|
From: Samuel Holland <samuel@sholland.org>
|
|
Date: Sat, 28 Aug 2021 00:27:19 -0500
|
|
Subject: [PATCH 50/90] gpio: axp: Select variant from compatible at runtime
|
|
|
|
There are three major variants of the AXP PMIC GPIO functionality (plus
|
|
PMICs with no GPIOs at all). Except for GPIO3 on the AXP209, which uses
|
|
a different register layout, it is straightforward to support all three
|
|
variants with a single driver. Do this, and in the process remove the
|
|
GPIO-related definitions from the PMIC-specific headers, and therefore
|
|
the dependency on AXP_PMIC_BUS.
|
|
|
|
Signed-off-by: Samuel Holland <samuel@sholland.org>
|
|
---
|
|
drivers/gpio/Kconfig | 1 -
|
|
drivers/gpio/axp_gpio.c | 137 +++++++++++++++++++++-------------------
|
|
drivers/power/axp209.c | 6 +-
|
|
drivers/power/axp221.c | 4 +-
|
|
include/axp152.h | 10 ---
|
|
include/axp209.h | 16 ++---
|
|
include/axp221.h | 13 ++--
|
|
include/axp809.h | 8 ---
|
|
include/axp818.h | 8 ---
|
|
9 files changed, 89 insertions(+), 114 deletions(-)
|
|
|
|
--- a/drivers/gpio/Kconfig
|
|
+++ b/drivers/gpio/Kconfig
|
|
@@ -107,7 +107,6 @@ config ALTERA_PIO
|
|
config AXP_GPIO
|
|
bool "X-Powers AXP PMICs GPIO driver"
|
|
depends on DM_GPIO && PMIC_AXP
|
|
- depends on AXP_PMIC_BUS
|
|
help
|
|
This driver supports the GPIO pins on
|
|
X-Powers AXP152, AXP2xx, and AXP8xx PMICs.
|
|
--- a/drivers/gpio/axp_gpio.c
|
|
+++ b/drivers/gpio/axp_gpio.c
|
|
@@ -7,110 +7,117 @@
|
|
|
|
#include <common.h>
|
|
#include <asm/gpio.h>
|
|
-#include <axp_pmic.h>
|
|
#include <dm.h>
|
|
+#include <dm/device-internal.h>
|
|
#include <errno.h>
|
|
#include <power/pmic.h>
|
|
|
|
#define AXP_GPIO_PREFIX "AXP0-"
|
|
#define AXP_GPIO_COUNT 4
|
|
|
|
-static int axp_gpio_set_value(struct udevice *dev, unsigned pin, int val);
|
|
-
|
|
-static u8 axp_get_gpio_ctrl_reg(unsigned pin)
|
|
-{
|
|
- switch (pin) {
|
|
- case 0: return AXP_GPIO0_CTRL;
|
|
- case 1: return AXP_GPIO1_CTRL;
|
|
-#ifdef AXP_GPIO2_CTRL
|
|
- case 2: return AXP_GPIO2_CTRL;
|
|
-#endif
|
|
-#ifdef AXP_GPIO3_CTRL
|
|
- case 3: return AXP_GPIO3_CTRL;
|
|
-#endif
|
|
- }
|
|
- return 0;
|
|
-}
|
|
-
|
|
-static int axp_gpio_direction_input(struct udevice *dev, unsigned pin)
|
|
-{
|
|
- u8 reg;
|
|
-
|
|
- reg = axp_get_gpio_ctrl_reg(pin);
|
|
- if (reg == 0)
|
|
- return -EINVAL;
|
|
-
|
|
- return pmic_reg_write(dev->parent, reg, AXP_GPIO_CTRL_INPUT);
|
|
-}
|
|
-
|
|
-static int axp_gpio_direction_output(struct udevice *dev, unsigned pin,
|
|
- int val)
|
|
-{
|
|
- u8 reg;
|
|
-
|
|
- reg = axp_get_gpio_ctrl_reg(pin);
|
|
- if (reg == 0)
|
|
- return -EINVAL;
|
|
-
|
|
- return pmic_reg_write(dev->parent, reg,
|
|
- val ? AXP_GPIO_CTRL_OUTPUT_HIGH :
|
|
- AXP_GPIO_CTRL_OUTPUT_LOW);
|
|
-}
|
|
+#define AXP_GPIO_CTRL_MASK 0x7
|
|
+#define AXP_GPIO_CTRL_OUTPUT_LOW 0
|
|
+#define AXP_GPIO_CTRL_OUTPUT_HIGH 1
|
|
+
|
|
+struct axp_gpio_desc {
|
|
+ const u8 *pins;
|
|
+ u8 npins;
|
|
+ u8 status_reg;
|
|
+ u8 status_offset;
|
|
+ u8 input_mux;
|
|
+};
|
|
|
|
static int axp_gpio_get_value(struct udevice *dev, unsigned pin)
|
|
{
|
|
- u8 reg, mask;
|
|
+ const struct axp_gpio_desc *desc = dev_get_priv(dev);
|
|
int ret;
|
|
|
|
- reg = axp_get_gpio_ctrl_reg(pin);
|
|
- if (reg == 0)
|
|
- return -EINVAL;
|
|
-
|
|
- ret = pmic_reg_read(dev->parent, AXP_GPIO_STATE);
|
|
+ ret = pmic_reg_read(dev->parent, desc->status_reg);
|
|
if (ret < 0)
|
|
return ret;
|
|
|
|
- mask = 1 << (pin + AXP_GPIO_STATE_OFFSET);
|
|
-
|
|
- return (ret & mask) ? 1 : 0;
|
|
+ return !!(ret & BIT(desc->status_offset + pin));
|
|
}
|
|
|
|
-static int axp_gpio_set_value(struct udevice *dev, unsigned pin, int val)
|
|
+static int axp_gpio_set_flags(struct udevice *dev, unsigned pin, ulong flags)
|
|
{
|
|
- u8 reg;
|
|
+ const struct axp_gpio_desc *desc = dev_get_priv(dev);
|
|
+ u8 mux;
|
|
|
|
- reg = axp_get_gpio_ctrl_reg(pin);
|
|
- if (reg == 0)
|
|
+ if (flags & (GPIOD_MASK_DSTYPE | GPIOD_MASK_PULL))
|
|
return -EINVAL;
|
|
|
|
- return pmic_reg_write(dev->parent, reg,
|
|
- val ? AXP_GPIO_CTRL_OUTPUT_HIGH :
|
|
- AXP_GPIO_CTRL_OUTPUT_LOW);
|
|
+ if (flags & GPIOD_IS_IN)
|
|
+ mux = desc->input_mux;
|
|
+ else if (flags & GPIOD_IS_OUT_ACTIVE)
|
|
+ mux = AXP_GPIO_CTRL_OUTPUT_HIGH;
|
|
+ else
|
|
+ mux = AXP_GPIO_CTRL_OUTPUT_LOW;
|
|
+
|
|
+ return pmic_clrsetbits(dev->parent, desc->pins[pin],
|
|
+ AXP_GPIO_CTRL_MASK, mux);
|
|
}
|
|
|
|
static const struct dm_gpio_ops axp_gpio_ops = {
|
|
- .direction_input = axp_gpio_direction_input,
|
|
- .direction_output = axp_gpio_direction_output,
|
|
.get_value = axp_gpio_get_value,
|
|
- .set_value = axp_gpio_set_value,
|
|
+ .xlate = gpio_xlate_offs_flags,
|
|
+ .set_flags = axp_gpio_set_flags,
|
|
};
|
|
|
|
static int axp_gpio_probe(struct udevice *dev)
|
|
{
|
|
+ struct axp_gpio_desc *desc = (void *)dev_get_driver_data(dev);
|
|
struct gpio_dev_priv *uc_priv = dev_get_uclass_priv(dev);
|
|
|
|
+ dev_set_priv(dev, desc);
|
|
+
|
|
/* Tell the uclass how many GPIOs we have */
|
|
uc_priv->bank_name = AXP_GPIO_PREFIX;
|
|
- uc_priv->gpio_count = AXP_GPIO_COUNT;
|
|
+ uc_priv->gpio_count = desc->npins;
|
|
|
|
return 0;
|
|
}
|
|
|
|
+static const u8 axp152_gpio_pins[] = {
|
|
+ 0x90, 0x91, 0x92, 0x93,
|
|
+};
|
|
+
|
|
+static const struct axp_gpio_desc axp152_gpio_desc = {
|
|
+ .pins = axp152_gpio_pins,
|
|
+ .npins = ARRAY_SIZE(axp152_gpio_pins),
|
|
+ .status_reg = 0x97,
|
|
+ .status_offset = 4,
|
|
+ .input_mux = 3,
|
|
+};
|
|
+
|
|
+static const u8 axp209_gpio_pins[] = {
|
|
+ 0x90, 0x92, 0x93,
|
|
+};
|
|
+
|
|
+static const struct axp_gpio_desc axp209_gpio_desc = {
|
|
+ .pins = axp209_gpio_pins,
|
|
+ .npins = ARRAY_SIZE(axp209_gpio_pins),
|
|
+ .status_reg = 0x94,
|
|
+ .status_offset = 4,
|
|
+ .input_mux = 2,
|
|
+};
|
|
+
|
|
+static const u8 axp221_gpio_pins[] = {
|
|
+ 0x90, 0x92,
|
|
+};
|
|
+
|
|
+static const struct axp_gpio_desc axp221_gpio_desc = {
|
|
+ .pins = axp221_gpio_pins,
|
|
+ .npins = ARRAY_SIZE(axp221_gpio_pins),
|
|
+ .status_reg = 0x94,
|
|
+ .input_mux = 2,
|
|
+};
|
|
+
|
|
static const struct udevice_id axp_gpio_ids[] = {
|
|
- { .compatible = "x-powers,axp152-gpio" },
|
|
- { .compatible = "x-powers,axp209-gpio" },
|
|
- { .compatible = "x-powers,axp221-gpio" },
|
|
- { .compatible = "x-powers,axp813-gpio" },
|
|
+ { .compatible = "x-powers,axp152-gpio", .data = (ulong)&axp152_gpio_desc },
|
|
+ { .compatible = "x-powers,axp209-gpio", .data = (ulong)&axp209_gpio_desc },
|
|
+ { .compatible = "x-powers,axp221-gpio", .data = (ulong)&axp221_gpio_desc },
|
|
+ { .compatible = "x-powers,axp813-gpio", .data = (ulong)&axp221_gpio_desc },
|
|
{ }
|
|
};
|
|
|
|
--- a/drivers/power/axp209.c
|
|
+++ b/drivers/power/axp209.c
|
|
@@ -215,15 +215,15 @@ int axp_init(void)
|
|
* Turn off LDOIO regulators / tri-state GPIO pins, when rebooting
|
|
* from android these are sometimes on.
|
|
*/
|
|
- rc = pmic_bus_write(AXP_GPIO0_CTRL, AXP_GPIO_CTRL_INPUT);
|
|
+ rc = pmic_bus_write(AXP209_GPIO0_CTRL, AXP209_GPIO_CTRL_INPUT);
|
|
if (rc)
|
|
return rc;
|
|
|
|
- rc = pmic_bus_write(AXP_GPIO1_CTRL, AXP_GPIO_CTRL_INPUT);
|
|
+ rc = pmic_bus_write(AXP209_GPIO1_CTRL, AXP209_GPIO_CTRL_INPUT);
|
|
if (rc)
|
|
return rc;
|
|
|
|
- rc = pmic_bus_write(AXP_GPIO2_CTRL, AXP_GPIO_CTRL_INPUT);
|
|
+ rc = pmic_bus_write(AXP209_GPIO2_CTRL, AXP209_GPIO_CTRL_INPUT);
|
|
if (rc)
|
|
return rc;
|
|
|
|
--- a/drivers/power/axp221.c
|
|
+++ b/drivers/power/axp221.c
|
|
@@ -226,11 +226,11 @@ int axp_init(void)
|
|
* Turn off LDOIO regulators / tri-state GPIO pins, when rebooting
|
|
* from android these are sometimes on.
|
|
*/
|
|
- ret = pmic_bus_write(AXP_GPIO0_CTRL, AXP_GPIO_CTRL_INPUT);
|
|
+ ret = pmic_bus_write(AXP221_GPIO0_CTRL, AXP221_GPIO_CTRL_INPUT);
|
|
if (ret)
|
|
return ret;
|
|
|
|
- ret = pmic_bus_write(AXP_GPIO1_CTRL, AXP_GPIO_CTRL_INPUT);
|
|
+ ret = pmic_bus_write(AXP221_GPIO1_CTRL, AXP221_GPIO_CTRL_INPUT);
|
|
if (ret)
|
|
return ret;
|
|
|
|
--- a/include/axp152.h
|
|
+++ b/include/axp152.h
|
|
@@ -14,17 +14,7 @@ enum axp152_reg {
|
|
|
|
#define AXP152_POWEROFF (1 << 7)
|
|
|
|
-/* For axp_gpio.c */
|
|
#ifdef CONFIG_AXP152_POWER
|
|
#define AXP_POWER_STATUS 0x00
|
|
#define AXP_POWER_STATUS_ALDO_IN BIT(0)
|
|
-#define AXP_GPIO0_CTRL 0x90
|
|
-#define AXP_GPIO1_CTRL 0x91
|
|
-#define AXP_GPIO2_CTRL 0x92
|
|
-#define AXP_GPIO3_CTRL 0x93
|
|
-#define AXP_GPIO_CTRL_OUTPUT_LOW 0x00 /* Drive pin low */
|
|
-#define AXP_GPIO_CTRL_OUTPUT_HIGH 0x01 /* Drive pin high */
|
|
-#define AXP_GPIO_CTRL_INPUT 0x02 /* Input */
|
|
-#define AXP_GPIO_STATE 0x97
|
|
-#define AXP_GPIO_STATE_OFFSET 0
|
|
#endif
|
|
--- a/include/axp209.h
|
|
+++ b/include/axp209.h
|
|
@@ -21,6 +21,9 @@ enum axp209_reg {
|
|
AXP209_IRQ_ENABLE5 = 0x44,
|
|
AXP209_IRQ_STATUS5 = 0x4c,
|
|
AXP209_SHUTDOWN = 0x32,
|
|
+ AXP209_GPIO0_CTRL = 0x90,
|
|
+ AXP209_GPIO1_CTRL = 0x92,
|
|
+ AXP209_GPIO2_CTRL = 0x93,
|
|
};
|
|
|
|
#define AXP209_POWER_STATUS_ON_BY_DC BIT(0)
|
|
@@ -73,16 +76,11 @@ enum axp209_reg {
|
|
|
|
#define AXP209_POWEROFF BIT(7)
|
|
|
|
-/* For axp_gpio.c */
|
|
+#define AXP209_GPIO_CTRL_OUTPUT_LOW 0x00
|
|
+#define AXP209_GPIO_CTRL_OUTPUT_HIGH 0x01
|
|
+#define AXP209_GPIO_CTRL_INPUT 0x02
|
|
+
|
|
#ifdef CONFIG_AXP209_POWER
|
|
#define AXP_POWER_STATUS 0x00
|
|
#define AXP_POWER_STATUS_ALDO_IN BIT(0)
|
|
-#define AXP_GPIO0_CTRL 0x90
|
|
-#define AXP_GPIO1_CTRL 0x92
|
|
-#define AXP_GPIO2_CTRL 0x93
|
|
-#define AXP_GPIO_CTRL_OUTPUT_LOW 0x00 /* Drive pin low */
|
|
-#define AXP_GPIO_CTRL_OUTPUT_HIGH 0x01 /* Drive pin high */
|
|
-#define AXP_GPIO_CTRL_INPUT 0x02 /* Input */
|
|
-#define AXP_GPIO_STATE 0x94
|
|
-#define AXP_GPIO_STATE_OFFSET 4
|
|
#endif
|
|
--- a/include/axp221.h
|
|
+++ b/include/axp221.h
|
|
@@ -44,20 +44,17 @@
|
|
#define AXP221_ALDO3_CTRL 0x2a
|
|
#define AXP221_SHUTDOWN 0x32
|
|
#define AXP221_SHUTDOWN_POWEROFF (1 << 7)
|
|
+#define AXP221_GPIO0_CTRL 0x90
|
|
+#define AXP221_GPIO1_CTRL 0x92
|
|
+#define AXP221_GPIO_CTRL_OUTPUT_LOW 0x00
|
|
+#define AXP221_GPIO_CTRL_OUTPUT_HIGH 0x01
|
|
+#define AXP221_GPIO_CTRL_INPUT 0x02
|
|
#define AXP221_PAGE 0xff
|
|
|
|
/* Page 1 addresses */
|
|
#define AXP221_SID 0x20
|
|
|
|
-/* For axp_gpio.c */
|
|
#ifdef CONFIG_AXP221_POWER
|
|
#define AXP_POWER_STATUS 0x00
|
|
#define AXP_POWER_STATUS_ALDO_IN BIT(0)
|
|
-#define AXP_GPIO0_CTRL 0x90
|
|
-#define AXP_GPIO1_CTRL 0x92
|
|
-#define AXP_GPIO_CTRL_OUTPUT_LOW 0x00 /* Drive pin low */
|
|
-#define AXP_GPIO_CTRL_OUTPUT_HIGH 0x01 /* Drive pin high */
|
|
-#define AXP_GPIO_CTRL_INPUT 0x02 /* Input */
|
|
-#define AXP_GPIO_STATE 0x94
|
|
-#define AXP_GPIO_STATE_OFFSET 0
|
|
#endif
|
|
--- a/include/axp809.h
|
|
+++ b/include/axp809.h
|
|
@@ -43,15 +43,7 @@
|
|
#define AXP809_SHUTDOWN 0x32
|
|
#define AXP809_SHUTDOWN_POWEROFF (1 << 7)
|
|
|
|
-/* For axp_gpio.c */
|
|
#ifdef CONFIG_AXP809_POWER
|
|
#define AXP_POWER_STATUS 0x00
|
|
#define AXP_POWER_STATUS_ALDO_IN BIT(0)
|
|
-#define AXP_GPIO0_CTRL 0x90
|
|
-#define AXP_GPIO1_CTRL 0x92
|
|
-#define AXP_GPIO_CTRL_OUTPUT_LOW 0x00 /* Drive pin low */
|
|
-#define AXP_GPIO_CTRL_OUTPUT_HIGH 0x01 /* Drive pin high */
|
|
-#define AXP_GPIO_CTRL_INPUT 0x02 /* Input */
|
|
-#define AXP_GPIO_STATE 0x94
|
|
-#define AXP_GPIO_STATE_OFFSET 0
|
|
#endif
|
|
--- a/include/axp818.h
|
|
+++ b/include/axp818.h
|
|
@@ -57,15 +57,7 @@
|
|
#define AXP818_SHUTDOWN 0x32
|
|
#define AXP818_SHUTDOWN_POWEROFF (1 << 7)
|
|
|
|
-/* For axp_gpio.c */
|
|
#ifdef CONFIG_AXP818_POWER
|
|
#define AXP_POWER_STATUS 0x00
|
|
#define AXP_POWER_STATUS_ALDO_IN BIT(0)
|
|
-#define AXP_GPIO0_CTRL 0x90
|
|
-#define AXP_GPIO1_CTRL 0x92
|
|
-#define AXP_GPIO_CTRL_OUTPUT_LOW 0x00 /* Drive pin low */
|
|
-#define AXP_GPIO_CTRL_OUTPUT_HIGH 0x01 /* Drive pin high */
|
|
-#define AXP_GPIO_CTRL_INPUT 0x02 /* Input */
|
|
-#define AXP_GPIO_STATE 0x94
|
|
-#define AXP_GPIO_STATE_OFFSET 0
|
|
#endif
|