mirror of
https://github.com/openwrt/openwrt.git
synced 2024-12-20 22:23:27 +00:00
584d7c53bd
This commit introduces new subtarget for Marvell EBU Armada Cortex A53
processor based devices.
The first device is Globalscale ESPRESSObin. Some hardware specs:
SoC: Marvell Armada 3700LP (88F3720) dual core ARM Cortex A53
processor up to 1.2GHz
RAM: 512MB, 1GB or 2GB DDR3
Storage: SATA interface
µSD card slot with footprint for an optional 4GB EMMC
4MB SPI NOR flash for bootloader
Ethernet: Topaz Networking Switch (88E6341) with 3x GbE ports
Connectors: USB 3.0
USB 2.0
µUSB port connected to PL2303SA (USB to serial bridge
controller) for UART access
Expansion: 2x 46-pin GPIO headers for accessories and shields with
I2C, GPIOs, PWM, UART, SPI, MMC, etc
MiniPCIe slot
Misc: Reset button, JTAG interface
Currently booting only from µSD card is supported.
The boards depending on date of dispatch can come with various U-Boot
versions. For the newest version 2017.03-armada-17.10 no manual
intervention should be needed to boot OpenWrt image. For the older ones
it's necessary to modify default U-Boot environment:
1. Interrupt boot process to run U-Boot command line,
2. Run following commands:
(for version 2017.03-armada-17.06 and 2017.03-armada-17.08)
setenv bootcmd "load mmc 0:1 0x4d00000 boot.scr; source 0x4d00000"
saveenv
(for version 2015.01-armada-17.02 and 2015.01-armada-17.04)
setenv bootargs "console=ttyMV0,115200 root=/dev/mmcblk0p2 rw rootwait"
setenv bootcmd "ext4load mmc 0:1 ${fdt_addr} armada-3720-espressobin.dtb; ext4load mmc 0:1 ${kernel_addr} Image; booti ${kernel_addr} - ${fdt_addr}"
saveenv
3. Poweroff, insert SD card with OpenWrt image, boot and enjoy.
Signed-off-by: Tomasz Maciej Nowak <tomek_n@o2.pl>
30 lines
542 B
Diff
30 lines
542 B
Diff
--- a/arch/arm64/boot/dts/marvell/armada-3720-espressobin.dts
|
|
+++ b/arch/arm64/boot/dts/marvell/armada-3720-espressobin.dts
|
|
@@ -111,6 +111,26 @@
|
|
status = "okay";
|
|
};
|
|
|
|
+&spi0 {
|
|
+ status = "okay";
|
|
+
|
|
+ w25q32dw@0 {
|
|
+ #address-cells = <1>;
|
|
+ #size-cells = <1>;
|
|
+ compatible = "jedec,spi-nor";
|
|
+ reg = <0>;
|
|
+ spi-max-frequency = <104000000>;
|
|
+ m25,fast-read;
|
|
+
|
|
+ pinctrl-names = "default";
|
|
+ pinctrl-0 = <&spi_quad_pins>;
|
|
+ };
|
|
+};
|
|
+
|
|
+&i2c0 {
|
|
+ status = "okay";
|
|
+};
|
|
+
|
|
&mdio {
|
|
switch0: switch0@1 {
|
|
compatible = "marvell,mv88e6085";
|