mirror of
https://github.com/openwrt/openwrt.git
synced 2024-12-20 14:13:16 +00:00
f5984e0a0c
This board has: - mt7621 SoC - 8MB SPI flash - 128MB RAM - 5x ethernet ports from internal (SoC) switch - 1x ethernet port sitting on gmac2 and IC+ phy (not yet supported) - 3x PCIe slots - 1x USB 2.0 and 1x USB 3.0 - sound based on wm8960 - SDXC card slot (full size) First fw write from interactive u-boot menu, interrupt with 2. After that sysupgrade. Tested both with 4.9 and 4.14 Signed-off-by: Roman Yeryomin <roman@advem.lv>
128 lines
2.1 KiB
Plaintext
128 lines
2.1 KiB
Plaintext
/dts-v1/;
|
|
|
|
#include "mt7621.dtsi"
|
|
|
|
/ {
|
|
compatible = "mediatek,ap-mt7621a-v60", "mediatek,mt7621-soc";
|
|
model = "Mediatek AP-MT7621A-V60 EVB";
|
|
|
|
memory@0 {
|
|
device_type = "memory";
|
|
reg = <0x0 0x8000000>;
|
|
};
|
|
|
|
chosen {
|
|
bootargs = "console=ttyS0,57600";
|
|
};
|
|
|
|
sound {
|
|
compatible = "simple-audio-card";
|
|
simple-audio-card,name = "Audio-I2S";
|
|
simple-audio-card,format = "i2s";
|
|
simple-audio-card,bitclock-master = <&dailink0_master>;
|
|
simple-audio-card,frame-master = <&dailink0_master>;
|
|
simple-audio-card,widgets =
|
|
"Microphone", "Microphone Jack",
|
|
"Headphone", "Headphone Jack";
|
|
simple-audio-card,routing =
|
|
"LINPUT1", "Microphone Jack",
|
|
"RINPUT1", "Microphone Jack",
|
|
"Headphone Jack", "HP_L",
|
|
"Headphone Jack", "HP_R";
|
|
simple-audio-card,mclk-fs = <256>;
|
|
|
|
simple-audio-card,cpu {
|
|
sound-dai = <&i2s>;
|
|
};
|
|
|
|
dailink0_master: simple-audio-card,codec {
|
|
sound-dai = <&codec>;
|
|
};
|
|
};
|
|
};
|
|
|
|
&pinctrl {
|
|
state_default: pinctrl0 {
|
|
gpio {
|
|
ralink,group = "uart2", "rgmii2";
|
|
ralink,function = "gpio";
|
|
};
|
|
};
|
|
i2s_pins: i2s {
|
|
i2s {
|
|
ralink,group = "uart3";
|
|
ralink,function = "i2s";
|
|
};
|
|
};
|
|
};
|
|
|
|
&i2c {
|
|
status = "okay";
|
|
|
|
codec: wm8960@1a {
|
|
#sound-dai-cells = <0>;
|
|
compatible = "wlf,wm8960";
|
|
reg = <0x1a>;
|
|
wlf,shared-lrclk;
|
|
};
|
|
};
|
|
|
|
&gdma {
|
|
status = "okay";
|
|
};
|
|
|
|
&i2s {
|
|
#sound-dai-cells = <0>;
|
|
status = "okay";
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&i2s_pins>;
|
|
};
|
|
|
|
&spi0 {
|
|
status = "okay";
|
|
|
|
mx25l6405d@0 {
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
compatible = "mx25l6405d","jedec,spi-nor";
|
|
reg = <0 0>;
|
|
spi-max-frequency = <10000000>;
|
|
m25p,chunked-io = <32>;
|
|
|
|
partition@0 {
|
|
label = "u-boot";
|
|
reg = <0x0 0x30000>;
|
|
read-only;
|
|
};
|
|
|
|
partition@30000 {
|
|
label = "u-boot-env";
|
|
reg = <0x30000 0x10000>;
|
|
read-only;
|
|
};
|
|
|
|
factory: partition@40000 {
|
|
label = "factory";
|
|
reg = <0x40000 0x10000>;
|
|
read-only;
|
|
};
|
|
|
|
partition@50000 {
|
|
label = "firmware";
|
|
reg = <0x50000 0x7b0000>;
|
|
};
|
|
};
|
|
};
|
|
|
|
&sdhci {
|
|
status = "okay";
|
|
};
|
|
|
|
ðernet {
|
|
mtd-mac-address = <&factory 0x5>;
|
|
};
|
|
|
|
&pcie {
|
|
status = "okay";
|
|
};
|