mirror of
https://github.com/openwrt/openwrt.git
synced 2024-12-20 14:13:16 +00:00
e2aa0c3f8b
Refreshed all patches Dropped upstreamed patches: 522-PCI-aardvark-fix-logic-in-PCI-configuration-read-write-functions.patch 523-PCI-aardvark-set-PIO_ADDR_LS-correctly-in-advk_pcie_rd_conf.patch 525-PCI-aardvark-use-isr1-instead-of-isr0-interrupt-in-legacy-irq-mode.patch 527-PCI-aardvark-fix-PCIe-max-read-request-size-setting.patch updated patches: 524-PCI-aardvark-set-host-and-device-to-the-same-MAX-payload-size.patch 030-USB-serial-option-fix-dwm-158-3g-modem-interface.patch Added new ARM64 symbol: CONFIG_ARM64_ERRATUM_1024718 Compile-tested on: cns3xxx, imx6, mvebu (arm64), x86_64 Runtime-tested on: cns3xxx, imx6, x86_64 Signed-off-by: Koen Vandeputte <koen.vandeputte@ncentric.com>
39 lines
1.1 KiB
Diff
39 lines
1.1 KiB
Diff
From 5813b729eb9fe91fcf895a5c2f30bf34fbd46379 Mon Sep 17 00:00:00 2001
|
|
From: Linus Walleij <linus.walleij@linaro.org>
|
|
Date: Wed, 2 May 2018 09:17:25 +0200
|
|
Subject: [PATCH] ARM: dts: Fix bootargs for Gemini D-Link devices
|
|
|
|
These machines need to be booted from very specific harddisk
|
|
partitions (as the D-Link DNS-313 boots specifically from
|
|
partition 4). Add the proper bootargs so that everything works
|
|
smoothly.
|
|
|
|
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
|
|
---
|
|
arch/arm/boot/dts/gemini-dlink-dir-685.dts | 3 ++-
|
|
arch/arm/boot/dts/gemini-dlink-dns-313.dts | 1 +
|
|
2 files changed, 3 insertions(+), 1 deletion(-)
|
|
|
|
--- a/arch/arm/boot/dts/gemini-dlink-dir-685.dts
|
|
+++ b/arch/arm/boot/dts/gemini-dlink-dir-685.dts
|
|
@@ -20,7 +20,8 @@
|
|
};
|
|
|
|
chosen {
|
|
- stdout-path = "uart0:115200n8";
|
|
+ bootargs = "console=ttyS0,19200n8 root=/dev/sda1 rw rootwait";
|
|
+ stdout-path = "uart0:19200n8";
|
|
};
|
|
|
|
gpio_keys {
|
|
--- a/arch/arm/boot/dts/gemini-dlink-dns-313.dts
|
|
+++ b/arch/arm/boot/dts/gemini-dlink-dns-313.dts
|
|
@@ -26,6 +26,7 @@
|
|
};
|
|
|
|
chosen {
|
|
+ bootargs = "console=ttyS0,19200n8 root=/dev/sda4 rw rootwait";
|
|
stdout-path = "uart0:19200n8";
|
|
};
|
|
|