openwrt/target/linux/generic/backport-5.4/310-v5.6-mips-vdso-fix-jalr-t9-crash-in-vdso-code.patch
John Audia da98603597 kernel: bump 5.4 to 5.4.58
This PR is a blend of several kernel bumps authored by ldir taken from his
staging tree w/ some further adjustments made by me and update_kernel.sh

Summary:
Deleted upstreamed patches:
  generic:
    742-v5.5-net-sfp-add-support-for-module-quirks.patch
    743-v5.5-net-sfp-add-some-quirks-for-GPON-modules.patch
  bcm63xx:
    022-v5.8-mtd-rawnand-brcmnand-correctly-verify-erased-pages.patch
    024-v5.8-mtd-rawnand-brcmnand-fix-CS0-layout.patch
  mediatek:
    0402-net-ethernet-mtk_eth_soc-Always-call-mtk_gmac0_rgmii.patch

Deleted patches applied differently upstream:
  generic:
    641-sch_cake-fix-IP-protocol-handling-in-the-presence-of.patch

Manually merged patches:
  generic:
    395-v5.8-net-sch_cake-Take-advantage-of-skb-hash-where-appropriate.patch
  bcm27xx:
    950-0132-lan78xx-Debounce-link-events-to-minimize-poll-storm.patch
  layerscape:
    701-net-0231-enetc-Use-DT-protocol-information-to-set-up-the-port.patch

Build system: x86_64
Build-tested: ath79/generic, bcm27xx/bcm2708, bcm27xx/bcm2711,
  imx6, mvebu/cortexa9, sunxi/a53
Run-tested: Netgear R7800 (ipq806x)

No dmesg regressions, everything functional

Signed-off-by: John Audia <graysky@archlinux.us>
Tested-By: Lucian Cristian <Lucian.cristian@gmail.com> [mvebu]
Tested-By: Curtis Deptuck <curtdept@me.com> [x86/64]
[do not remove 395-v5.8-net-sch_cake-Take-advantage-... patch,
adjust and refresh patches, adjust commit message]
Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
Tested-By: John Audia <graysky@archlinux.us> [ipq806x]
2020-08-18 18:14:54 +02:00

55 lines
2.5 KiB
Diff

From d3f703c4359ff06619b2322b91f69710453e6b6d Mon Sep 17 00:00:00 2001
From: Victor Kamensky <kamensky@cisco.com>
Date: Tue, 11 Feb 2020 11:24:33 -0800
Subject: [PATCH] mips: vdso: fix 'jalr t9' crash in vdso code
Observed that when kernel is built with Yocto mips64-poky-linux-gcc,
and mips64-poky-linux-gnun32-gcc toolchain, resulting vdso contains
'jalr t9' instructions in its code and since in vdso case nobody
sets GOT table code crashes when instruction reached. On other hand
observed that when kernel is built mips-poky-linux-gcc toolchain, the
same 'jalr t9' instruction are replaced with PC relative function
calls using 'bal' instructions.
The difference boils down to -mrelax-pic-calls and -mexplicit-relocs
gcc options that gets different default values depending on gcc
target triplets and corresponding binutils. -mrelax-pic-calls got
enabled by default only in mips-poky-linux-gcc case. MIPS binutils
ld relies on R_MIPS_JALR relocation to convert 'jalr t9' into 'bal'
and such relocation is generated only if -mrelax-pic-calls option
is on.
Please note 'jalr t9' conversion to 'bal' can happen only to static
functions. These static PIC calls use mips local GOT entries that
are supposed to be filled with start of DSO value by run-time linker
(missing in VDSO case) and they do not have dynamic relocations.
Global mips GOT entries must have dynamic relocations and they should
be prevented by cmd_vdso_check Makefile rule.
Solution call out -mrelax-pic-calls and -mexplicit-relocs options
explicitly while compiling MIPS vdso code. That would get correct
and consistent between different toolchains behaviour.
Reported-by: Bruce Ashfield <bruce.ashfield@gmail.com>
Signed-off-by: Victor Kamensky <kamensky@cisco.com>
Signed-off-by: Paul Burton <paulburton@kernel.org>
Cc: linux-mips@vger.kernel.org
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: James Hogan <jhogan@kernel.org>
Cc: Vincenzo Frascino <vincenzo.frascino@arm.com>
Cc: richard.purdie@linuxfoundation.org
---
arch/mips/vdso/Makefile | 1 +
1 file changed, 1 insertion(+)
--- a/arch/mips/vdso/Makefile
+++ b/arch/mips/vdso/Makefile
@@ -29,6 +29,7 @@ endif
cflags-vdso := $(ccflags-vdso) \
$(filter -W%,$(filter-out -Wa$(comma)%,$(KBUILD_CFLAGS))) \
-O3 -g -fPIC -fno-strict-aliasing -fno-common -fno-builtin -G 0 \
+ -mrelax-pic-calls -mexplicit-relocs \
-fno-stack-protector -fno-jump-tables -DDISABLE_BRANCH_PROFILING \
$(call cc-option, -fno-asynchronous-unwind-tables) \
$(call cc-option, -fno-stack-protector)