openwrt/target/linux/ar71xx/image
Adrian Schmutzler 9aa8f87d27 ar71xx: Add "info" partition for TP-Link Archer C7 v5
This adds the "info" MTD partition, as it is specified in the
ath79 DTS:
https://github.com/openwrt/openwrt/blob/master/target/linux/ath79/dts/qca9563_tplink_archer-c7-v5.dts#L35

This is required to set the WAN MAC address, as it is build based
on the LAN MAC address, which in turn has to be read from the
"info" partition:
https://github.com/openwrt/openwrt/blob/master/target/linux/ath79/dts/qca9563_tplink_archer-c7-v5.dts#L35

Tested-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
2019-04-08 18:37:04 +02:00
..
lzma-loader ar71xx: lzma-loader: constify kernel argv array 2018-06-06 22:25:52 +02:00
common-tp-link.mk ar71xx: factor out safe loader image build code 2018-07-07 21:07:40 +02:00
generic-legacy-devices.mk mac80211: make ath10k-ct the default ath10k 2018-09-26 16:39:44 +02:00
generic-tp-link.mk ar71xx: Add "info" partition for TP-Link Archer C7 v5 2019-04-08 18:37:04 +02:00
generic-ubnt.mk ar71xx: Add support for Ubiquity Bullet M (XW) 2019-04-08 18:37:04 +02:00
generic.mk build: move seama commands to image-commands.mk 2018-12-30 20:08:13 +01:00
legacy.mk ar71xx: Move F9K1115v2 under ar71xx tiny target 2018-07-16 15:12:19 +02:00
Makefile ar71xx: Move some targets to tiny 2018-10-17 18:02:16 +02:00
mikrotik.mk ar71xx: add support for MikroTik RouterBOARD 922UAGS-5HPacD 2019-03-26 18:01:47 +01:00
nand.mk mac80211: make ath10k-ct the default ath10k 2018-09-26 16:39:44 +02:00
tiny-legacy-devices.mk mac80211: make ath10k-ct the default ath10k 2018-09-26 16:39:44 +02:00
tiny-senao.mk ar71xx: move OCEDO Koala to generic and use dynamic partitioning 2018-10-29 11:21:23 +01:00
tiny-tp-link.mk Add support for TL-WA801ND v4 2018-12-07 21:46:45 +01:00
tiny.mk ath79: modify mtd partitions for Buffalo BHR-4GRV2 2018-11-26 12:28:17 +01:00
ubinize-nbg6716.ini ar71xx: nbg6716: Enable procd nand sysupgrage 2014-06-26 11:43:38 +00:00
ubinize-wndr4300.ini ar71xx: remove old jffs2 marker from image generation on nand targets 2014-06-24 18:14:18 +00:00