openwrt/target/linux/realtek/dts-5.10
INAGAKI Hiroshi 5163bb5e54 realtek: add support for APRESIA ApresiaLightGS120GT-SS
APRESIA ApresiaLightGS120GT-SS (APLGS120GTSS) is a 16 + 4 ports gigabit
switch, based on RTL8382M.

Specifications:

- SoC          : Realtek RTL8382M
- RAM          : DDR3 256 MiB (Nanya NT5CC256M8JQ-EK)
- Flash        : SPI-NOR 32 MiB (Macronix MX25L25635FMI-10G)
- Ethernet     : 10/100/1000 Mbps x16 + 4
  - port  1-8  : RTL8218B
  - port  9-16 : RTL8382M, TP (SoC, RTL8218B)
  - port 17-20 : RTL8214FC, TP/SFP (Combo)
- LEDs/Keys    : 3x/1x
- UART         : through-hole on PCB
  - J6: 3.3V, TX, RX, GND from tri-angle marking side
  - 115200n8
- Power        : 100-120/200-240 VAC, 50/60 Hz
                 Max. 16 W, Avg 14 W (100 VAC)
  - Plug       : IEC 60320-C13

Flash instruction using factory image:

1. Boot ApresiaLightGS120GT-SS normally
2. Login to WebUI and open firmware page ("ファームウェア")
3. If the device is booted from image1, set active image for next
   booting ("起動イメージ選択") to image2("イメージ2"), press apply
   ("適用") button and reboot the device to make booting from image2
4. On the WebUI, set active image to image1
5. Select the OpenWrt factory image and press update button ("更新")
6. Open reboot page ("再起動") and press reboot button ("再起動実行")

Notes:

- "ApresiaLightGS120GT-SS" is a model name and "APLGS120GTSS" is a model
  number

- this device has 3x GPIO-controlled LEDs on PCB, but 1x LED
  ("green:unused") has no hole on the case

Signed-off-by: INAGAKI Hiroshi <musashino.open@gmail.com>
2023-02-13 12:22:17 +01:00
..
rtl83xx_d-link_dgs-1210_common.dtsi realtek: D-Link make common DT include generic 2022-09-17 21:28:21 +02:00
rtl83xx_d-link_dgs-1210_gpio.dtsi realtek: d-link: dgs-1210 remake of the device tree 2022-08-20 09:02:44 +02:00
rtl83xx_panasonic_mxxeg-pn28xx0k.dtsi realtek: add support for Panasonic Switch-M16eG PN28160K 2022-08-06 14:39:57 +02:00
rtl838x_hpe_1920.dtsi Revert "realtek: remove support for HPE 1920 series" 2022-07-28 16:45:19 +02:00
rtl838x.dtsi realtek: timer driver: activate for RTL838X devices 2022-10-23 22:33:08 +02:00
rtl839x_d-link_dgs-1210_gpio.dtsi realtek: add support for DGS-1210-52 2022-09-17 21:28:21 +02:00
rtl839x.dtsi realtek: timer driver: activate for RTL839X devices 2022-10-23 22:33:08 +02:00
rtl930x.dtsi realtek: add sys-led disable pinctrl for rtl930x 2022-07-10 09:54:35 +02:00
rtl931x.dtsi realtek: fix dts whitespace 2023-02-09 03:03:52 +01:00
rtl8380_d-link_dgs-1210-10mp-f.dts realtek: dgs-1210-10mp: update sfp phy-handle 2023-01-28 21:01:29 +01:00
rtl8380_engenius_ews2910p.dts realtek: EnGenius EWS2910P: use the mtd3 partition for root overlay 2022-08-13 19:19:38 +02:00
rtl8380_hpe_1920-8g.dts Revert "realtek: remove support for HPE 1920 series" 2022-07-28 16:45:19 +02:00
rtl8380_netgear_gigabit_1xx.dtsi realtek: make Netgear GS1xx u-boot env partition writable 2022-06-22 17:51:02 +02:00
rtl8380_netgear_gigabit_3xx.dtsi realtek: make "u-boot-env" partition writable for Netgear 3xx series 2022-06-22 17:52:30 +02:00
rtl8380_netgear_gigabit.dtsi realtek: add missing gpio0 pinctrl properties 2022-07-10 09:54:35 +02:00
rtl8380_netgear_gs108t-v3.dts realtek: add support for power LED on Netgear GS108Tv3 2022-06-19 10:58:40 +02:00
rtl8380_netgear_gs110tpp-v1.dts realtek: Netgear GS110TPP v1: add lan9 and lan10 2022-08-13 19:15:46 +02:00
rtl8380_netgear_gs308t-v1.dts realtek: add support for power LED on Netgear GS308Tv1 2022-06-18 09:21:50 +02:00
rtl8380_netgear_gs310tp-v1.dts realtek: enable uart1 on the devices with PoE support in 5.10 2021-09-26 00:32:18 +02:00
rtl8380_panasonic_m8eg-pn28080k.dts realtek: add support for Panasonic Switch-M8eG PN28080K 2022-03-13 19:54:57 +01:00
rtl8380_tplink_sg2xxx.dtsi realtek: add support for TP-Link SG2210P 2022-09-13 09:22:26 +02:00
rtl8380_tplink_sg2008p-v1.dts realtek: add support for TP-Link SG2210P 2022-09-13 09:22:26 +02:00
rtl8380_tplink_sg2210p-v3.dts realtek: add support for TP-Link SG2210P 2022-09-13 09:22:26 +02:00
rtl8380_zyxel_gs1900-8.dts
rtl8380_zyxel_gs1900-8hp-v1.dts realtek: enable uart1 on the devices with PoE support in 5.10 2021-09-26 00:32:18 +02:00
rtl8380_zyxel_gs1900-8hp-v2.dts realtek: enable uart1 on the devices with PoE support in 5.10 2021-09-26 00:32:18 +02:00
rtl8380_zyxel_gs1900-10hp.dts realtek: enable uart1 on the devices with PoE support in 5.10 2021-09-26 00:32:18 +02:00
rtl8380_zyxel_gs1900.dtsi realtek: move RTL8231 definitions to board files 2022-02-20 16:23:55 +00:00
rtl8382_allnet_all-sg8208m.dts realtek: Consolidate bootargs 2021-11-24 21:42:44 +02:00
rtl8382_apresia_aplgs120gtss.dts realtek: add support for APRESIA ApresiaLightGS120GT-SS 2023-02-13 12:22:17 +01:00
rtl8382_d-link_dgs-1210-10p.dts realtek: update GPIO bindings for DGS-1210-10P 2022-12-09 00:13:51 +01:00
rtl8382_d-link_dgs-1210-16.dts realtek: D-Link make common DT include generic 2022-09-17 21:28:21 +02:00
rtl8382_d-link_dgs-1210-20.dts realtek: D-Link make common DT include generic 2022-09-17 21:28:21 +02:00
rtl8382_d-link_dgs-1210-28_common.dtsi realtek: d-link: add support for dgs-1210-28mp-f 2022-12-08 21:51:43 +01:00
rtl8382_d-link_dgs-1210-28.dts realtek: d-link: add support for dgs-1210-28mp-f 2022-12-08 21:51:43 +01:00
rtl8382_d-link_dgs-1210-28mp-f.dts realtek: d-link: add support for dgs-1210-28mp-f 2022-12-08 21:51:43 +01:00
rtl8382_hpe_1920-16g.dts Revert "realtek: remove support for HPE 1920 series" 2022-07-28 16:45:19 +02:00
rtl8382_hpe_1920-24g.dts Revert "realtek: remove support for HPE 1920 series" 2022-07-28 16:45:19 +02:00
rtl8382_hpe_1920.dtsi Revert "realtek: remove support for HPE 1920 series" 2022-07-28 16:45:19 +02:00
rtl8382_inaba_aml2-17gp.dts realtek: add missing gpio0 pinctrl properties 2022-07-10 09:54:35 +02:00
rtl8382_iodata_bsh-g24mb.dts realtek: add support for I-O DATA BSH-G24MB 2022-03-07 21:44:53 +01:00
rtl8382_panasonic_m16eg-pn28160k.dts realtek: add support for Panasonic Switch-M16eG PN28160K 2022-08-06 14:39:57 +02:00
rtl8382_panasonic_m24eg-pn28240k.dts realtek: add support for Panasonic Switch-M24eG PN28240K 2022-08-06 14:39:57 +02:00
rtl8382_zyxel_gs1900-16.dts realtek: add support for ZyXEL GS1900-16 2022-05-07 17:23:45 +02:00
rtl8382_zyxel_gs1900-24-v1.dts realtek: add ZyXEL GS1900-24 v1 support 2022-03-13 19:24:13 +01:00
rtl8382_zyxel_gs1900-24e.dts realtek: add support for ZyXEL GS1900-24E 2022-06-06 10:30:50 +02:00
rtl8382_zyxel_gs1900-24hp-v1.dts realtek: add ZyXEL GS1900-24HP v1 support 2022-04-16 17:26:56 +02:00
rtl8382_zyxel_gs1900-24hp-v2.dts realtek: enable uart1 on the devices with PoE support in 5.10 2021-09-26 00:32:18 +02:00
rtl8393_d-link_dgs-1210-52.dts realtek: add support for DGS-1210-52 2022-09-17 21:28:21 +02:00
rtl8393_netgear_gs750e.dts realtek: add support for Netgear GS750E 2023-01-13 22:28:36 +01:00
rtl8393_panasonic_m48eg-pn28480k.dts realtek: add support for Panasonic Switch-M48eG PN28480K 2022-08-06 14:39:57 +02:00
rtl8393_tplink_sg2452p-v4.dts realtek: tl-sg2xxx: read MAC address from nvmem-cells 2022-09-13 09:22:26 +02:00
rtl8393_zyxel_gs1900-48.dts realtek: fix dts whitespace 2023-02-09 03:03:52 +01:00
rtl9302_zyxel_xgs1250-12.dts realtek: add system LED for ZyXEL XGS1250-12 2022-07-10 09:54:35 +02:00