openwrt/target/linux/ramips/dts/mt7621_confiabits_mt7621-v1.dts
Luis Mita 3207fe6636
Some checks are pending
Build Kernel / Build all affected Kernels (push) Waiting to run
ramips: mt7621: add support for Confiabits MT7621 v1
Hardware:
 - SoC: MediaTek MT7621DAT
 - Flash: 16 MiB cFeon
 - RAM: 128 MiB MT7621DAT
 - WLAN: 2.4 GHz (MT7603EN), 5 GHz (MT7613BEN 802.11ac)
 - Ethernet: 1x 10/100/1000 Mbps WAN, 3x 10/100/1000 LAN (MT7621DAT)
 - Buttons: 1 Reset button, 1 WPS button
 - LEDs: 5x Green (POWER/WAN/2.4G/5G/WPS), 1x Red (WAN)
 - Serial console: unpopulated header, 57600 8n1
 - Power: 12 VDC, 1 A

MAC:
LAN MAC: label mac (eeprom@4)
WAN MAC: label mac (eeprom@4)
2.4G MAC: label mac (eeprom@4)
5G MAC: label mac + 1 (eeprom@8004)

Installation:
The stock firmware is OpenWrt-based. If you can reach LuCI or SSH, just use the sysupgrade image
with the 'Keep settings' option turned off.

Signed-off-by: Luis Mita <luis@luismita.com>
Link: https://github.com/openwrt/openwrt/pull/17534
(cherry picked from commit 1c5ca24da6cd727f4fcb8edbe00fa66543a6c678)
Link: https://github.com/openwrt/openwrt/pull/17653
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
2025-01-18 19:21:57 +01:00

216 lines
3.6 KiB
Plaintext

// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
#include "mt7621.dtsi"
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/input/input.h>
#include <dt-bindings/leds/common.h>
/ {
compatible = "confiabits,mt7621-v1", "mediatek,mt7621-soc";
model = "Confiabits MT7621 v1";
aliases {
led-boot = &led_power_green;
led-failsafe = &led_power_green;
led-running = &led_power_green;
led-upgrade = &led_power_green;
};
chosen {
bootargs = "console=ttyS0,57600";
};
keys {
compatible = "gpio-keys";
button-wps {
label = "wps";
gpios = <&gpio 13 GPIO_ACTIVE_LOW>;
debounce-interval = <60>;
linux,code = <KEY_WPS_BUTTON>;
};
button-reset {
label = "reset";
gpios = <&gpio 18 GPIO_ACTIVE_LOW>;
debounce-interval = <60>;
linux,code = <KEY_RESTART>;
};
};
leds {
compatible = "gpio-leds";
led_power_green: led-power-green {
color = <LED_COLOR_ID_GREEN>;
function = LED_FUNCTION_POWER;
gpios = <&gpio 3 GPIO_ACTIVE_LOW>;
};
led-wan-red {
color = <LED_COLOR_ID_RED>;
function = LED_FUNCTION_WAN;
gpios = <&gpio 4 GPIO_ACTIVE_LOW>;
};
led-wlan5 {
color = <LED_COLOR_ID_GREEN>;
function = LED_FUNCTION_WLAN_5GHZ;
gpios = <&gpio 14 GPIO_ACTIVE_LOW>;
linux,default-trigger = "phy1tpt";
};
led-wps {
color = <LED_COLOR_ID_GREEN>;
function = LED_FUNCTION_WPS;
gpios = <&gpio 15 GPIO_ACTIVE_LOW>;
};
led-wlan24 {
color = <LED_COLOR_ID_GREEN>;
function = LED_FUNCTION_WLAN_2GHZ;
gpios = <&gpio 16 GPIO_ACTIVE_LOW>;
linux,default-trigger = "phy0tpt";
};
led-wan-green {
color = <LED_COLOR_ID_GREEN>;
function = LED_FUNCTION_WAN;
gpios = <&gpio 17 GPIO_ACTIVE_LOW>;
};
};
};
&spi0 {
status = "okay";
flash@0 {
compatible = "jedec,spi-nor";
reg = <0>;
spi-max-frequency = <40000000>;
partitions {
compatible = "fixed-partitions";
#address-cells = <1>;
#size-cells = <1>;
partition@0 {
label = "u-boot";
reg = <0x0 0x30000>;
read-only;
};
partition@30000 {
label = "u-boot-env";
reg = <0x30000 0x10000>;
read-only;
};
partition@40000 {
label = "radio";
reg = <0x40000 0x10000>;
read-only;
nvmem-layout {
compatible = "fixed-layout";
#address-cells = <1>;
#size-cells = <1>;
eeprom_radio_0: eeprom@0 {
reg = <0x0 0x400>;
};
eeprom_radio_8000: eeprom@8000 {
reg = <0x8000 0x4da8>;
};
macaddr_radio_4: macaddr@4 {
reg = <0x4 0x6>;
};
macaddr_radio_8004: macaddr@8004 {
reg = <0x8004 0x6>;
};
};
};
partition@50000 {
label = "firmware";
compatible = "denx,uimage";
reg = <0x50000 0xfb0000>;
};
};
};
};
&gmac0 {
nvmem-cells = <&macaddr_radio_4>;
nvmem-cell-names = "mac-address";
};
&gmac1 {
status = "okay";
label = "wan";
phy-handle = <&ethphy4>;
nvmem-cells = <&macaddr_radio_4>;
nvmem-cell-names = "mac-address";
};
&ethphy4 {
/delete-property/ interrupts;
};
&pcie {
status = "okay";
};
&pcie0 {
wifi@0,0 {
compatible = "mediatek,mt76";
reg = <0x0000 0 0 0 0>;
ieee80211-freq-limit = <2400000 2500000>;
nvmem-cells = <&eeprom_radio_0>;
nvmem-cell-names = "eeprom";
};
};
&pcie1 {
wifi@0,0 {
compatible = "mediatek,mt76";
reg = <0x0000 0 0 0 0>;
ieee80211-freq-limit = <5000000 6000000>;
nvmem-cells = <&eeprom_radio_8000>;
nvmem-cell-names = "eeprom";
};
};
&state_default {
gpio {
groups = "i2c", "jtag", "wdt";
function = "gpio";
};
};
&switch0 {
ports {
port@0 {
status = "okay";
label = "lan1";
};
port@1 {
status = "okay";
label = "lan2";
};
port@2 {
status = "okay";
label = "lan3";
};
};
};