mirror of
https://github.com/openwrt/openwrt.git
synced 2024-12-26 08:51:13 +00:00
c6ddf8d502
Many changes were done in drivers/pinctrl/bcm/pinctrl-bcm2835.c between
5.4.171 and 5.4.179.
The following 3 patches do not apply any more:
* target/linux/bcm27xx/patches-5.4/950-0316-pinctrl-bcm2835-Add-support-for-BCM2711-pull-up-func.patch
This was already integrated in kernel v5.4-rc1, it was never needed.
* target/linux/bcm27xx/patches-5.4/950-0328-Revert-pinctrl-bcm2835-Pass-irqchip-when-adding-gpio.patch
* target/linux/bcm27xx/patches-5.4/950-0362-pinctrl-bcm2835-Change-init-order-for-gpio-hogs.patch
I think these were done to fix the problem which was really fixed in
commit 75278f1aff5e ("pinctrl: bcm2835: Change init order for gpio
hogs") from v5.4.175
target/linux/generic/backport-5.4/716-v5.5-net-sfp-move-fwnode-parsing-into-sfp-bus-layer.patch
Move fwnode_device_is_available to the same position as in kernel 5.10.
target/linux/layerscape/patches-5.4/302-dts-0083-arm64-ls1028a-qds-correct-bus-of-rtc.patch
Applied in commit 65816c1034769e714edb70f59a33bc5472d9e55f ("arm64: dts:
ls1028a-qds: move rtc node to the correct i2c bus")
Compile-tested: lantiq/xrx200, bcm27xx/bcm2710
Run-tested: lantiq/xrx200
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
50 lines
1.3 KiB
Diff
50 lines
1.3 KiB
Diff
From 4de1f70135fa4b44eb5016e36ba08ffd0bc62414 Mon Sep 17 00:00:00 2001
|
|
From: Wen He <wen.he_1@nxp.com>
|
|
Date: Wed, 27 Nov 2019 17:48:17 +0800
|
|
Subject: [PATCH] arm64: dts: ls1028a: Add DP DT nodes
|
|
|
|
Add DP DT nodes for configure and enable the HD Display
|
|
controller on LS1028ARDB and LS1028AQDS boards.
|
|
|
|
Signed-off-by: Wen He <wen.he_1@nxp.com>
|
|
---
|
|
arch/arm64/boot/dts/freescale/fsl-ls1028a-qds.dts | 9 +--------
|
|
arch/arm64/boot/dts/freescale/fsl-ls1028a-rdb.dts | 9 +--------
|
|
2 files changed, 2 insertions(+), 16 deletions(-)
|
|
|
|
--- a/arch/arm64/boot/dts/freescale/fsl-ls1028a-qds.dts
|
|
+++ b/arch/arm64/boot/dts/freescale/fsl-ls1028a-qds.dts
|
|
@@ -274,14 +274,7 @@
|
|
};
|
|
|
|
&hdptx0 {
|
|
- fsl,no_edid;
|
|
- resolution = "3840x2160@60",
|
|
- "1920x1080@60",
|
|
- "1280x720@60",
|
|
- "720x480@60";
|
|
- lane_mapping = <0x4e>;
|
|
- edp_link_rate = <0x6>;
|
|
- edp_num_lanes = <0x4>;
|
|
+ lane-mapping = <0x4e>;
|
|
status = "okay";
|
|
};
|
|
|
|
--- a/arch/arm64/boot/dts/freescale/fsl-ls1028a-rdb.dts
|
|
+++ b/arch/arm64/boot/dts/freescale/fsl-ls1028a-rdb.dts
|
|
@@ -262,13 +262,6 @@
|
|
};
|
|
|
|
&hdptx0 {
|
|
- fsl,no_edid;
|
|
- resolution = "3840x2160@60",
|
|
- "1920x1080@60",
|
|
- "1280x720@60",
|
|
- "720x480@60";
|
|
- lane_mapping = <0x4e>;
|
|
- edp_link_rate = <0x6>;
|
|
- edp_num_lanes = <0x4>;
|
|
+ lane-mapping = <0x4e>;
|
|
status = "okay";
|
|
};
|