mirror of
https://github.com/openwrt/openwrt.git
synced 2024-12-24 07:46:48 +00:00
b5c93edd74
This adds driver for the Qualcomm QCA8072 and QCA8075 PHY-s. They are 2 or 5 port IEEE 802.3 clause 22 compliant 10BASE-Te, 100BASE-TX and 1000BASE-T PHY-s. They feature 2 SerDes, one for PSGMII or QSGMII connection with MAC, while second one is SGMII for connection to MAC or fiber. Both models have a combo port that supports 1000BASE-X and 100BASE-FX fiber. Each PHY inside of QCA807x series has 2 digitally controlled output only pins that natively drive LED-s. But some vendors used these to driver generic LED-s controlled by user space, so lets enable registering each PHY as GPIO controller and add driver for it. This also adds the ability to specify DT properties so that 1000 Base-T LED will also be lit up for 100 and 10 Base connections. This is usually done by U-boot, but boards running mainline U-boot are not configuring this yet. These PHY-s are commonly used in Qualcomm IPQ40xx, IPQ60xx and IPQ807x boards. Signed-off-by: Robert Marko <robert.marko@sartura.hr>
51 lines
1.8 KiB
Diff
51 lines
1.8 KiB
Diff
From f825cdc8bfde7616a14e2163f16303a8973031d2 Mon Sep 17 00:00:00 2001
|
|
From: Robert Marko <robert.marko@sartura.hr>
|
|
Date: Wed, 7 Oct 2020 17:38:48 +0200
|
|
Subject: [PATCH] net: phy: Add Qualcom QCA807x driver
|
|
|
|
This adds driver for the Qualcomm QCA8072 and QCA8075 PHY-s.
|
|
|
|
They are 2 or 5 port IEEE 802.3 clause 22 compliant 10BASE-Te, 100BASE-TX and 1000BASE-T PHY-s.
|
|
|
|
They feature 2 SerDes, one for PSGMII or QSGMII connection with MAC, while second one is SGMII for connection to MAC or fiber.
|
|
|
|
Both models have a combo port that supports 1000BASE-X and 100BASE-FX fiber.
|
|
|
|
Each PHY inside of QCA807x series has 4 digitally controlled output only pins that natively drive LED-s.
|
|
But some vendors used these to driver generic LED-s controlled by userspace,
|
|
so lets enable registering each PHY as GPIO controller and add driver for it.
|
|
|
|
These are commonly used in Qualcomm IPQ40xx, IPQ60xx and IPQ807x boards.
|
|
|
|
Signed-off-by: Robert Marko <robert.marko@sartura.hr>
|
|
---
|
|
drivers/net/phy/Kconfig | 6 ++++++
|
|
drivers/net/phy/Makefile | 1 +
|
|
2 files changed, 7 insertions(+)
|
|
|
|
--- a/drivers/net/phy/Kconfig
|
|
+++ b/drivers/net/phy/Kconfig
|
|
@@ -537,6 +537,12 @@ config NXP_TJA11XX_PHY
|
|
---help---
|
|
Currently supports the NXP TJA1100 and TJA1101 PHY.
|
|
|
|
+config QCA807X_PHY
|
|
+ tristate "Qualcomm QCA807X PHYs"
|
|
+ depends on OF_MDIO
|
|
+ help
|
|
+ Currently supports the QCA8072 and QCA8075 models.
|
|
+
|
|
config QSEMI_PHY
|
|
tristate "Quality Semiconductor PHYs"
|
|
---help---
|
|
--- a/drivers/net/phy/Makefile
|
|
+++ b/drivers/net/phy/Makefile
|
|
@@ -103,6 +103,7 @@ obj-$(CONFIG_MICROSEMI_PHY) += mscc.o
|
|
obj-$(CONFIG_NATIONAL_PHY) += national.o
|
|
obj-$(CONFIG_NXP_TJA11XX_PHY) += nxp-tja11xx.o
|
|
obj-$(CONFIG_QSEMI_PHY) += qsemi.o
|
|
+obj-$(CONFIG_QCA807X_PHY) += qca807x.o
|
|
obj-$(CONFIG_REALTEK_PHY) += realtek.o
|
|
obj-$(CONFIG_RENESAS_PHY) += uPD60620.o
|
|
obj-$(CONFIG_ROCKCHIP_PHY) += rockchip.o
|