mirror of
https://github.com/openwrt/openwrt.git
synced 2024-12-29 10:08:59 +00:00
e1bca7c77d
This fixes the usage of the RTL8231 GPIO extender chip when used with the RTL839X SoCs. Specifically, the PHY addresses may be different from 0. Signed-off-by: Birger Koblitz <git@birger-koblitz.de>
338 lines
7.8 KiB
C
338 lines
7.8 KiB
C
// SPDX-License-Identifier: GPL-2.0-only
|
|
|
|
#include <linux/gpio/driver.h>
|
|
#include <linux/module.h>
|
|
#include <linux/platform_device.h>
|
|
#include <linux/delay.h>
|
|
#include <asm/mach-rtl838x/mach-rtl83xx.h>
|
|
|
|
/* RTL8231 registers for LED control */
|
|
#define RTL8231_LED_FUNC0 0x0000
|
|
#define RTL8231_GPIO_PIN_SEL(gpio) ((0x0002) + ((gpio) >> 4))
|
|
#define RTL8231_GPIO_DIR(gpio) ((0x0005) + ((gpio) >> 4))
|
|
#define RTL8231_GPIO_DATA(gpio) ((0x001C) + ((gpio) >> 4))
|
|
|
|
#define USEC_TIMEOUT 5000
|
|
|
|
struct rtl8231_gpios {
|
|
struct gpio_chip gc;
|
|
struct device *dev;
|
|
u32 id;
|
|
int smi_bus_id;
|
|
u16 reg_shadow[0x20];
|
|
u32 reg_cached;
|
|
int ext_gpio_indrt_access;
|
|
};
|
|
|
|
extern struct mutex smi_lock;
|
|
extern struct rtl83xx_soc_info soc_info;
|
|
|
|
static u32 rtl8231_read(struct rtl8231_gpios *gpios, u32 reg)
|
|
{
|
|
u32 t = 0, n = 0;
|
|
u8 bus_id = gpios->smi_bus_id;
|
|
|
|
reg &= 0x1f;
|
|
bus_id &= 0x1f;
|
|
|
|
/* Calculate read register address */
|
|
t = (bus_id << 2) | (reg << 7);
|
|
|
|
/* Set execution bit: cleared when operation completed */
|
|
t |= 1;
|
|
|
|
// Start execution
|
|
sw_w32(t, gpios->ext_gpio_indrt_access);
|
|
do {
|
|
udelay(1);
|
|
t = sw_r32(gpios->ext_gpio_indrt_access);
|
|
n++;
|
|
} while ((t & 1) && (n < USEC_TIMEOUT));
|
|
|
|
if (n >= USEC_TIMEOUT)
|
|
return 0x80000000;
|
|
|
|
pr_debug("%s: %x, %x, %x\n", __func__, bus_id, reg, (t & 0xffff0000) >> 16);
|
|
|
|
return (t & 0xffff0000) >> 16;
|
|
}
|
|
|
|
static int rtl8231_write(struct rtl8231_gpios *gpios, u32 reg, u32 data)
|
|
{
|
|
u32 t = 0, n = 0;
|
|
u8 bus_id = gpios->smi_bus_id;
|
|
|
|
pr_debug("%s: %x, %x, %x\n", __func__, bus_id, reg, data);
|
|
reg &= 0x1f;
|
|
bus_id &= 0x1f;
|
|
|
|
t = (bus_id << 2) | (reg << 7) | (data << 16);
|
|
/* Set write bit */
|
|
t |= 2;
|
|
|
|
/* Set execution bit: cleared when operation completed */
|
|
t |= 1;
|
|
|
|
// Start execution
|
|
sw_w32(t, gpios->ext_gpio_indrt_access);
|
|
do {
|
|
udelay(1);
|
|
t = sw_r32(gpios->ext_gpio_indrt_access);
|
|
} while ((t & 1) && (n < USEC_TIMEOUT));
|
|
|
|
if (n >= USEC_TIMEOUT)
|
|
return -1;
|
|
|
|
return 0;
|
|
}
|
|
|
|
static u32 rtl8231_read_cached(struct rtl8231_gpios *gpios, u32 reg)
|
|
{
|
|
if (reg > 0x1f)
|
|
return 0;
|
|
|
|
if (gpios->reg_cached & (1 << reg))
|
|
return gpios->reg_shadow[reg];
|
|
|
|
return rtl8231_read(gpios, reg);
|
|
}
|
|
|
|
/* Set Direction of the RTL8231 pin:
|
|
* dir 1: input
|
|
* dir 0: output
|
|
*/
|
|
static int rtl8231_pin_dir(struct rtl8231_gpios *gpios, u32 gpio, u32 dir)
|
|
{
|
|
u32 v;
|
|
int pin_sel_addr = RTL8231_GPIO_PIN_SEL(gpio);
|
|
int pin_dir_addr = RTL8231_GPIO_DIR(gpio);
|
|
int pin = gpio % 16;
|
|
int dpin = pin;
|
|
|
|
if (gpio > 31) {
|
|
pr_debug("WARNING: HIGH pin\n");
|
|
dpin = pin << 5;
|
|
pin_dir_addr = pin_sel_addr;
|
|
}
|
|
|
|
v = rtl8231_read_cached(gpios, pin_dir_addr);
|
|
if (v & 0x80000000) {
|
|
pr_err("Error reading RTL8231\n");
|
|
return -1;
|
|
}
|
|
|
|
v = (v & ~(1 << dpin)) | (dir << dpin);
|
|
rtl8231_write(gpios, pin_dir_addr, v);
|
|
gpios->reg_shadow[pin_dir_addr] = v;
|
|
gpios->reg_cached |= 1 << pin_dir_addr;
|
|
return 0;
|
|
}
|
|
|
|
static int rtl8231_pin_dir_get(struct rtl8231_gpios *gpios, u32 gpio, u32 *dir)
|
|
{
|
|
/* dir 1: input
|
|
* dir 0: output
|
|
*/
|
|
|
|
u32 v;
|
|
int pin_dir_addr = RTL8231_GPIO_DIR(gpio);
|
|
int pin = gpio % 16;
|
|
|
|
if (gpio > 31) {
|
|
pin_dir_addr = RTL8231_GPIO_PIN_SEL(gpio);
|
|
pin = pin << 5;
|
|
}
|
|
|
|
v = rtl8231_read(gpios, pin_dir_addr);
|
|
if (v & (1 << pin))
|
|
*dir = 1;
|
|
else
|
|
*dir = 0;
|
|
return 0;
|
|
}
|
|
|
|
static int rtl8231_pin_set(struct rtl8231_gpios *gpios, u32 gpio, u32 data)
|
|
{
|
|
u32 v = rtl8231_read(gpios, RTL8231_GPIO_DATA(gpio));
|
|
|
|
pr_debug("%s: %d to %d\n", __func__, gpio, data);
|
|
if (v & 0x80000000) {
|
|
pr_err("Error reading RTL8231\n");
|
|
return -1;
|
|
}
|
|
v = (v & ~(1 << (gpio % 16))) | (data << (gpio % 16));
|
|
rtl8231_write(gpios, RTL8231_GPIO_DATA(gpio), v);
|
|
gpios->reg_shadow[RTL8231_GPIO_DATA(gpio)] = v;
|
|
gpios->reg_cached |= 1 << RTL8231_GPIO_DATA(gpio);
|
|
return 0;
|
|
}
|
|
|
|
static int rtl8231_pin_get(struct rtl8231_gpios *gpios, u32 gpio, u16 *state)
|
|
{
|
|
u32 v = rtl8231_read(gpios, RTL8231_GPIO_DATA(gpio));
|
|
|
|
if (v & 0x80000000) {
|
|
pr_err("Error reading RTL8231\n");
|
|
return -1;
|
|
}
|
|
|
|
*state = v & 0xffff;
|
|
return 0;
|
|
}
|
|
|
|
static int rtl8231_direction_input(struct gpio_chip *gc, unsigned int offset)
|
|
{
|
|
int err;
|
|
struct rtl8231_gpios *gpios = gpiochip_get_data(gc);
|
|
|
|
pr_debug("%s: %d\n", __func__, offset);
|
|
mutex_lock(&smi_lock);
|
|
err = rtl8231_pin_dir(gpios, offset, 1);
|
|
mutex_unlock(&smi_lock);
|
|
return err;
|
|
}
|
|
|
|
static int rtl8231_direction_output(struct gpio_chip *gc, unsigned int offset, int value)
|
|
{
|
|
int err;
|
|
struct rtl8231_gpios *gpios = gpiochip_get_data(gc);
|
|
|
|
pr_debug("%s: %d\n", __func__, offset);
|
|
mutex_lock(&smi_lock);
|
|
err = rtl8231_pin_dir(gpios, offset, 0);
|
|
mutex_unlock(&smi_lock);
|
|
if (!err)
|
|
err = rtl8231_pin_set(gpios, offset, value);
|
|
return err;
|
|
}
|
|
|
|
static int rtl8231_get_direction(struct gpio_chip *gc, unsigned int offset)
|
|
{
|
|
u32 v = 0;
|
|
struct rtl8231_gpios *gpios = gpiochip_get_data(gc);
|
|
|
|
pr_debug("%s: %d\n", __func__, offset);
|
|
mutex_lock(&smi_lock);
|
|
rtl8231_pin_dir_get(gpios, offset, &v);
|
|
mutex_unlock(&smi_lock);
|
|
return v;
|
|
}
|
|
|
|
static int rtl8231_gpio_get(struct gpio_chip *gc, unsigned int offset)
|
|
{
|
|
u16 state = 0;
|
|
struct rtl8231_gpios *gpios = gpiochip_get_data(gc);
|
|
|
|
mutex_lock(&smi_lock);
|
|
rtl8231_pin_get(gpios, offset, &state);
|
|
mutex_unlock(&smi_lock);
|
|
if (state & (1 << (offset % 16)))
|
|
return 1;
|
|
return 0;
|
|
}
|
|
|
|
void rtl8231_gpio_set(struct gpio_chip *gc, unsigned int offset, int value)
|
|
{
|
|
struct rtl8231_gpios *gpios = gpiochip_get_data(gc);
|
|
|
|
rtl8231_pin_set(gpios, offset, value);
|
|
}
|
|
|
|
int rtl8231_init(struct rtl8231_gpios *gpios)
|
|
{
|
|
pr_info("%s called, MDIO bus ID: %d\n", __func__, gpios->smi_bus_id);
|
|
|
|
gpios->reg_cached = 0;
|
|
|
|
if (soc_info.family == RTL8390_FAMILY_ID) {
|
|
// RTL8390: Enable external gpio in global led control register
|
|
sw_w32_mask(0x7 << 18, 0x4 << 18, RTL839X_LED_GLB_CTRL);
|
|
} else if (soc_info.family == RTL8380_FAMILY_ID) {
|
|
// RTL8380: Enable RTL8231 indirect access mode
|
|
sw_w32_mask(0, 1, RTL838X_EXTRA_GPIO_CTRL);
|
|
sw_w32_mask(3, 1, RTL838X_DMY_REG5);
|
|
}
|
|
|
|
/*Select GPIO functionality for pins 0-15, 16-31 and 32-37 */
|
|
rtl8231_write(gpios, RTL8231_GPIO_PIN_SEL(0), 0xffff);
|
|
rtl8231_write(gpios, RTL8231_GPIO_PIN_SEL(16), 0xffff);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static const struct of_device_id rtl8231_gpio_of_match[] = {
|
|
{ .compatible = "realtek,rtl8231-gpio" },
|
|
{},
|
|
};
|
|
|
|
MODULE_DEVICE_TABLE(of, rtl8231_gpio_of_match);
|
|
|
|
static int rtl8231_gpio_probe(struct platform_device *pdev)
|
|
{
|
|
struct device *dev = &pdev->dev;
|
|
struct device_node *np = dev->of_node;
|
|
struct rtl8231_gpios *gpios;
|
|
int err;
|
|
u32 indirect_bus_id;
|
|
|
|
pr_info("Probing RTL8231 GPIOs\n");
|
|
|
|
if (!np) {
|
|
dev_err(&pdev->dev, "No DT found\n");
|
|
return -EINVAL;
|
|
}
|
|
|
|
gpios = devm_kzalloc(dev, sizeof(*gpios), GFP_KERNEL);
|
|
if (!gpios)
|
|
return -ENOMEM;
|
|
|
|
gpios->id = soc_info.id;
|
|
if (soc_info.family == RTL8380_FAMILY_ID) {
|
|
gpios->ext_gpio_indrt_access = RTL838X_EXT_GPIO_INDRT_ACCESS;
|
|
}
|
|
|
|
if (soc_info.family == RTL8390_FAMILY_ID) {
|
|
gpios->ext_gpio_indrt_access = RTL839X_EXT_GPIO_INDRT_ACCESS;
|
|
}
|
|
|
|
/*
|
|
* We use a default MDIO bus ID for the 8231 of 0, which can be overriden
|
|
* by the indirect-access-bus-id property in the dts.
|
|
*/
|
|
gpios->smi_bus_id = 0;
|
|
of_property_read_u32(np, "indirect-access-bus-id", &indirect_bus_id);
|
|
gpios->smi_bus_id = indirect_bus_id;
|
|
|
|
rtl8231_init(gpios);
|
|
|
|
gpios->dev = dev;
|
|
gpios->gc.base = 160;
|
|
gpios->gc.ngpio = 36;
|
|
gpios->gc.label = "rtl8231";
|
|
gpios->gc.parent = dev;
|
|
gpios->gc.owner = THIS_MODULE;
|
|
gpios->gc.can_sleep = true;
|
|
|
|
gpios->gc.direction_input = rtl8231_direction_input;
|
|
gpios->gc.direction_output = rtl8231_direction_output;
|
|
gpios->gc.set = rtl8231_gpio_set;
|
|
gpios->gc.get = rtl8231_gpio_get;
|
|
gpios->gc.get_direction = rtl8231_get_direction;
|
|
|
|
err = devm_gpiochip_add_data(dev, &gpios->gc, gpios);
|
|
return err;
|
|
}
|
|
|
|
static struct platform_driver rtl8231_gpio_driver = {
|
|
.driver = {
|
|
.name = "rtl8231-gpio",
|
|
.of_match_table = rtl8231_gpio_of_match,
|
|
},
|
|
.probe = rtl8231_gpio_probe,
|
|
};
|
|
|
|
module_platform_driver(rtl8231_gpio_driver);
|
|
|
|
MODULE_DESCRIPTION("Realtek RTL8231 GPIO expansion chip support");
|
|
MODULE_LICENSE("GPL v2");
|