openwrt/package/boot/uboot-mediatek/patches/101-29-board-mediatek-add-MT7988-reference-boards.patch
Daniel Golle 1d5778e18d uboot-mediatek: build fully-featured U-Boot for MT7988 RFB
Select many potentially useful options for the MT7988 RFB U-Boot builds.
The resulting loader is intended as a development tool and intends to be
generic. It does *not* have a default bootcmd set, but allows to boot
pretty much everything, including EFI executables.

To install this U-Boot build to the eMMC:
  opkg install mmc-utils partx-utils
  mmc bootpart enable 1 1 /dev/mmcblk0
  echo 0 > /sys/block/mmcblk0boot0/force_ro
  dd if=*mediatek_mt7988a-rfb-nand-emmc-preloader.bin of=/dev/mmcblk0boot0
  dd if=*mediatek_mt7988a-rfb-nand-emmc-gpt.bin of=/dev/mmcblk0
  partx -a /dev/mmcblk0
  dd if=*mediatek_mt7988a-rfb-nand-emmc-bl31-uboot.fip of=/dev/mmcblk0p3

Signed-off-by: Daniel Golle <daniel@makrotopia.org>
2023-08-28 16:35:22 +01:00

576 lines
12 KiB
Diff

From fd7d9124ffa6761f27747daeea599e0ab874c1fa Mon Sep 17 00:00:00 2001
From: Weijie Gao <weijie.gao@mediatek.com>
Date: Wed, 19 Jul 2023 17:17:54 +0800
Subject: [PATCH 29/29] board: mediatek: add MT7988 reference boards
This patch adds general board files based on MT7988 SoCs.
MT7988 uses one mmc controller for booting from both SD and eMMC,
and the pins of mmc controller booting from SD are also shared with
one of spi controllers.
So two configs are need for these boot types:
1. mt7988_rfb_defconfig - SPI-NOR, SPI-NAND and eMMC
2. mt7988_sd_rfb_defconfig - SPI-NAND and SD
Signed-off-by: Weijie Gao <weijie.gao@mediatek.com>
---
arch/arm/dts/Makefile | 2 +
arch/arm/dts/mt7988-rfb.dts | 182 +++++++++++++++++++++++++++++
arch/arm/dts/mt7988-sd-rfb.dts | 134 +++++++++++++++++++++
board/mediatek/mt7988/MAINTAINERS | 7 ++
board/mediatek/mt7988/Makefile | 3 +
board/mediatek/mt7988/mt7988_rfb.c | 10 ++
configs/mt7988_rfb_defconfig | 83 +++++++++++++
configs/mt7988_sd_rfb_defconfig | 71 +++++++++++
include/configs/mt7988.h | 14 +++
9 files changed, 506 insertions(+)
create mode 100644 arch/arm/dts/mt7988-rfb.dts
create mode 100644 arch/arm/dts/mt7988-sd-rfb.dts
create mode 100644 board/mediatek/mt7988/MAINTAINERS
create mode 100644 board/mediatek/mt7988/Makefile
create mode 100644 board/mediatek/mt7988/mt7988_rfb.c
create mode 100644 configs/mt7988_rfb_defconfig
create mode 100644 configs/mt7988_sd_rfb_defconfig
create mode 100644 include/configs/mt7988.h
--- a/arch/arm/dts/Makefile
+++ b/arch/arm/dts/Makefile
@@ -1319,6 +1319,8 @@ dtb-$(CONFIG_ARCH_MEDIATEK) += \
mt7986b-sd-rfb.dtb \
mt7986a-emmc-rfb.dtb \
mt7986b-emmc-rfb.dtb \
+ mt7988-rfb.dtb \
+ mt7988-sd-rfb.dtb \
mt8183-pumpkin.dtb \
mt8512-bm1-emmc.dtb \
mt8516-pumpkin.dtb \
--- /dev/null
+++ b/arch/arm/dts/mt7988-rfb.dts
@@ -0,0 +1,182 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (c) 2022 MediaTek Inc.
+ * Author: Sam Shih <sam.shih@mediatek.com>
+ */
+
+/dts-v1/;
+#include "mt7988.dtsi"
+#include <dt-bindings/gpio/gpio.h>
+
+/ {
+ model = "mt7988-rfb";
+ compatible = "mediatek,mt7988-rfb";
+
+ chosen {
+ stdout-path = &uart0;
+ };
+
+ memory@40000000 {
+ device_type = "memory";
+ reg = <0 0x40000000 0 0x10000000>;
+ };
+
+ reg_3p3v: regulator-3p3v {
+ compatible = "regulator-fixed";
+ regulator-name = "fixed-3.3V";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ reg_1p8v: regulator-1p8v {
+ compatible = "regulator-fixed";
+ regulator-name = "fixed-1.8V";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+};
+
+&uart0 {
+ status = "okay";
+};
+
+&i2c1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&i2c1_pins>;
+ status = "okay";
+};
+
+&eth {
+ status = "okay";
+ mediatek,gmac-id = <0>;
+ phy-mode = "usxgmii";
+ mediatek,switch = "mt7988";
+
+ fixed-link {
+ speed = <1000>;
+ full-duplex;
+ pause;
+ };
+};
+
+&pinctrl {
+ i2c1_pins: i2c1-pins {
+ mux {
+ function = "i2c";
+ groups = "i2c1_0";
+ };
+ };
+
+ pwm_pins: pwm-pins {
+ mux {
+ function = "pwm";
+ groups = "pwm0", "pwm1", "pwm2", "pwm3", "pwm4",
+ "pwm5", "pwm6", "pwm7";
+ };
+ };
+
+ spi0_pins: spi0-pins {
+ mux {
+ function = "spi";
+ groups = "spi0", "spi0_wp_hold";
+ };
+ };
+
+ spi2_pins: spi2-pins {
+ mux {
+ function = "spi";
+ groups = "spi2", "spi2_wp_hold";
+ };
+ };
+
+ mmc0_pins_default: mmc0default {
+ mux {
+ function = "flash";
+ groups = "emmc_51";
+ };
+
+ conf-cmd-dat {
+ pins = "EMMC_DATA_0", "EMMC_DATA_1", "EMMC_DATA_2",
+ "EMMC_DATA_3", "EMMC_DATA_4", "EMMC_DATA_5",
+ "EMMC_DATA_6", "EMMC_DATA_7", "EMMC_CMD";
+ input-enable;
+ };
+
+ conf-clk {
+ pins = "EMMC_CK";
+ };
+
+ conf-dsl {
+ pins = "EMMC_DSL";
+ };
+
+ conf-rst {
+ pins = "EMMC_RSTB";
+ };
+ };
+};
+
+&pwm {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pwm_pins>;
+ status = "okay";
+};
+
+&spi0 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&spi0_pins>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "okay";
+ must_tx;
+ enhance_timing;
+ dma_ext;
+ ipm_design;
+ support_quad;
+ tick_dly = <2>;
+ sample_sel = <0>;
+
+ spi_nand@0 {
+ compatible = "spi-nand";
+ reg = <0>;
+ spi-max-frequency = <52000000>;
+ };
+};
+
+&spi2 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&spi2_pins>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "okay";
+ must_tx;
+ enhance_timing;
+ dma_ext;
+ ipm_design;
+ support_quad;
+ tick_dly = <2>;
+ sample_sel = <0>;
+
+ spi_nor@0 {
+ compatible = "jedec,spi-nor";
+ reg = <0>;
+ spi-max-frequency = <52000000>;
+ };
+};
+
+&mmc0 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&mmc0_pins_default>;
+ max-frequency = <52000000>;
+ bus-width = <8>;
+ cap-mmc-highspeed;
+ cap-mmc-hw-reset;
+ vmmc-supply = <&reg_3p3v>;
+ vqmmc-supply = <&reg_1p8v>;
+ non-removable;
+ status = "okay";
+};
--- /dev/null
+++ b/arch/arm/dts/mt7988-sd-rfb.dts
@@ -0,0 +1,134 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (c) 2022 MediaTek Inc.
+ * Author: Sam Shih <sam.shih@mediatek.com>
+ */
+
+/dts-v1/;
+#include "mt7988.dtsi"
+#include <dt-bindings/gpio/gpio.h>
+
+/ {
+ model = "mt7988-rfb";
+ compatible = "mediatek,mt7988-rfb", "mediatek,mt7988-sd-rfb";
+
+ chosen {
+ stdout-path = &uart0;
+ };
+
+ memory@40000000 {
+ device_type = "memory";
+ reg = <0 0x40000000 0 0x10000000>;
+ };
+
+ reg_3p3v: regulator-3p3v {
+ compatible = "regulator-fixed";
+ regulator-name = "fixed-3.3V";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+};
+
+&uart0 {
+ status = "okay";
+};
+
+&i2c1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&i2c1_pins>;
+ status = "okay";
+};
+
+&eth {
+ status = "okay";
+ mediatek,gmac-id = <0>;
+ phy-mode = "usxgmii";
+ mediatek,switch = "mt7988";
+
+ fixed-link {
+ speed = <1000>;
+ full-duplex;
+ pause;
+ };
+};
+
+&pinctrl {
+ i2c1_pins: i2c1-pins {
+ mux {
+ function = "i2c";
+ groups = "i2c1_0";
+ };
+ };
+
+ pwm_pins: pwm-pins {
+ mux {
+ function = "pwm";
+ groups = "pwm0", "pwm1", "pwm2", "pwm3", "pwm4",
+ "pwm5", "pwm6", "pwm7";
+ };
+ };
+
+ spi0_pins: spi0-pins {
+ mux {
+ function = "spi";
+ groups = "spi0", "spi0_wp_hold";
+ };
+ };
+
+ mmc1_pins_default: mmc1default {
+ mux {
+ function = "flash";
+ groups = "emmc_45";
+ };
+
+ conf-cmd-dat {
+ pins = "SPI2_CSB", "SPI2_MISO", "SPI2_MOSI",
+ "SPI2_CLK", "SPI2_HOLD";
+ input-enable;
+ };
+
+ conf-clk {
+ pins = "SPI2_WP";
+ };
+ };
+};
+
+&pwm {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pwm_pins>;
+ status = "okay";
+};
+
+&spi0 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&spi0_pins>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "okay";
+ must_tx;
+ enhance_timing;
+ dma_ext;
+ ipm_design;
+ support_quad;
+ tick_dly = <2>;
+ sample_sel = <0>;
+
+ spi_nand@0 {
+ compatible = "spi-nand";
+ reg = <0>;
+ spi-max-frequency = <52000000>;
+ };
+};
+
+&mmc0 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&mmc1_pins_default>;
+ max-frequency = <52000000>;
+ bus-width = <4>;
+ cap-sd-highspeed;
+ vmmc-supply = <&reg_3p3v>;
+ vqmmc-supply = <&reg_3p3v>;
+ status = "okay";
+};
--- /dev/null
+++ b/board/mediatek/mt7988/MAINTAINERS
@@ -0,0 +1,7 @@
+MT7988
+M: Sam Shih <sam.shih@mediatek.com>
+S: Maintained
+F: board/mediatek/mt7988
+F: include/configs/mt7988.h
+F: configs/mt7988_rfb_defconfig
+F: configs/mt7988_sd_rfb_defconfig
--- /dev/null
+++ b/board/mediatek/mt7988/Makefile
@@ -0,0 +1,3 @@
+# SPDX-License-Identifier: GPL-2.0
+
+obj-y += mt7988_rfb.o
--- /dev/null
+++ b/board/mediatek/mt7988/mt7988_rfb.c
@@ -0,0 +1,10 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (C) 2022 MediaTek Inc.
+ * Author: Sam Shih <sam.shih@mediatek.com>
+ */
+
+int board_init(void)
+{
+ return 0;
+}
--- /dev/null
+++ b/configs/mt7988_rfb_defconfig
@@ -0,0 +1,83 @@
+CONFIG_ARM=y
+CONFIG_SYS_HAS_NONCACHED_MEMORY=y
+CONFIG_POSITION_INDEPENDENT=y
+CONFIG_ARCH_MEDIATEK=y
+CONFIG_TEXT_BASE=0x41e00000
+CONFIG_SYS_MALLOC_F_LEN=0x4000
+CONFIG_NR_DRAM_BANKS=1
+CONFIG_DEFAULT_DEVICE_TREE="mt7988-rfb"
+CONFIG_SYS_PROMPT="MT7988> "
+CONFIG_TARGET_MT7988=y
+CONFIG_DEBUG_UART_BASE=0x11000000
+CONFIG_DEBUG_UART_CLOCK=40000000
+CONFIG_SYS_LOAD_ADDR=0x50000000
+CONFIG_DEBUG_UART=y
+# CONFIG_AUTOBOOT is not set
+CONFIG_DEFAULT_FDT_FILE="mt7988-rfb"
+CONFIG_LOGLEVEL=7
+CONFIG_LOG=y
+CONFIG_SYS_CBSIZE=512
+CONFIG_SYS_PBSIZE=1049
+# CONFIG_BOOTM_NETBSD is not set
+# CONFIG_BOOTM_PLAN9 is not set
+# CONFIG_BOOTM_RTEMS is not set
+# CONFIG_BOOTM_VXWORKS is not set
+# CONFIG_CMD_ELF is not set
+CONFIG_CMD_CLK=y
+CONFIG_CMD_DM=y
+CONFIG_CMD_GPIO=y
+CONFIG_CMD_PWM=y
+CONFIG_CMD_MMC=y
+CONFIG_CMD_MTD=y
+CONFIG_CMD_PING=y
+CONFIG_CMD_SMC=y
+CONFIG_DOS_PARTITION=y
+CONFIG_EFI_PARTITION=y
+CONFIG_PARTITION_TYPE_GUID=y
+CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG=y
+CONFIG_NET_RANDOM_ETHADDR=y
+CONFIG_USE_IPADDR=y
+CONFIG_IPADDR="192.168.1.1"
+CONFIG_USE_NETMASK=y
+CONFIG_NETMASK="255.255.255.0"
+CONFIG_USE_SERVERIP=y
+CONFIG_SERVERIP="192.168.1.2"
+CONFIG_PROT_TCP=y
+CONFIG_REGMAP=y
+CONFIG_SYSCON=y
+CONFIG_CLK=y
+CONFIG_MMC_HS200_SUPPORT=y
+CONFIG_MMC_MTK=y
+CONFIG_MTD=y
+CONFIG_DM_MTD=y
+CONFIG_MTD_SPI_NAND=y
+CONFIG_DM_SPI_FLASH=y
+CONFIG_SPI_FLASH_SFDP_SUPPORT=y
+CONFIG_SPI_FLASH_EON=y
+CONFIG_SPI_FLASH_GIGADEVICE=y
+CONFIG_SPI_FLASH_ISSI=y
+CONFIG_SPI_FLASH_MACRONIX=y
+CONFIG_SPI_FLASH_SPANSION=y
+CONFIG_SPI_FLASH_STMICRO=y
+CONFIG_SPI_FLASH_WINBOND=y
+CONFIG_SPI_FLASH_XMC=y
+CONFIG_SPI_FLASH_XTX=y
+CONFIG_SPI_FLASH_MTD=y
+CONFIG_PHY_FIXED=y
+CONFIG_MEDIATEK_ETH=y
+CONFIG_PINCTRL=y
+CONFIG_PINCONF=y
+CONFIG_PINCTRL_MT7988=y
+CONFIG_POWER_DOMAIN=y
+CONFIG_MTK_POWER_DOMAIN=y
+CONFIG_DM_PWM=y
+CONFIG_PWM_MTK=y
+CONFIG_RAM=y
+CONFIG_DM_SERIAL=y
+CONFIG_MTK_SERIAL=y
+CONFIG_SPI=y
+CONFIG_DM_SPI=y
+CONFIG_MTK_SPIM=y
+CONFIG_LZO=y
+CONFIG_HEXDUMP=y
+# CONFIG_EFI_LOADER is not set
--- /dev/null
+++ b/configs/mt7988_sd_rfb_defconfig
@@ -0,0 +1,71 @@
+CONFIG_ARM=y
+CONFIG_SYS_HAS_NONCACHED_MEMORY=y
+CONFIG_POSITION_INDEPENDENT=y
+CONFIG_ARCH_MEDIATEK=y
+CONFIG_TEXT_BASE=0x41e00000
+CONFIG_SYS_MALLOC_F_LEN=0x4000
+CONFIG_NR_DRAM_BANKS=1
+CONFIG_DEFAULT_DEVICE_TREE="mt7988-sd-rfb"
+CONFIG_SYS_PROMPT="MT7988> "
+CONFIG_TARGET_MT7988=y
+CONFIG_DEBUG_UART_BASE=0x11000000
+CONFIG_DEBUG_UART_CLOCK=40000000
+CONFIG_SYS_LOAD_ADDR=0x50000000
+CONFIG_DEBUG_UART=y
+# CONFIG_AUTOBOOT is not set
+CONFIG_DEFAULT_FDT_FILE="mt7988-sd-rfb"
+CONFIG_LOGLEVEL=7
+CONFIG_LOG=y
+CONFIG_SYS_CBSIZE=512
+CONFIG_SYS_PBSIZE=1049
+# CONFIG_BOOTM_NETBSD is not set
+# CONFIG_BOOTM_PLAN9 is not set
+# CONFIG_BOOTM_RTEMS is not set
+# CONFIG_BOOTM_VXWORKS is not set
+# CONFIG_CMD_ELF is not set
+CONFIG_CMD_CLK=y
+CONFIG_CMD_DM=y
+CONFIG_CMD_GPIO=y
+CONFIG_CMD_PWM=y
+CONFIG_CMD_MMC=y
+CONFIG_CMD_MTD=y
+CONFIG_CMD_PING=y
+CONFIG_CMD_SMC=y
+CONFIG_DOS_PARTITION=y
+CONFIG_EFI_PARTITION=y
+CONFIG_PARTITION_TYPE_GUID=y
+CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG=y
+CONFIG_NET_RANDOM_ETHADDR=y
+CONFIG_USE_IPADDR=y
+CONFIG_IPADDR="192.168.1.1"
+CONFIG_USE_NETMASK=y
+CONFIG_NETMASK="255.255.255.0"
+CONFIG_USE_SERVERIP=y
+CONFIG_SERVERIP="192.168.1.2"
+CONFIG_PROT_TCP=y
+CONFIG_REGMAP=y
+CONFIG_SYSCON=y
+CONFIG_CLK=y
+CONFIG_MMC_HS200_SUPPORT=y
+CONFIG_MMC_MTK=y
+CONFIG_MTD=y
+CONFIG_DM_MTD=y
+CONFIG_MTD_SPI_NAND=y
+CONFIG_PHY_FIXED=y
+CONFIG_MEDIATEK_ETH=y
+CONFIG_PINCTRL=y
+CONFIG_PINCONF=y
+CONFIG_PINCTRL_MT7988=y
+CONFIG_POWER_DOMAIN=y
+CONFIG_MTK_POWER_DOMAIN=y
+CONFIG_DM_PWM=y
+CONFIG_PWM_MTK=y
+CONFIG_RAM=y
+CONFIG_DM_SERIAL=y
+CONFIG_MTK_SERIAL=y
+CONFIG_SPI=y
+CONFIG_DM_SPI=y
+CONFIG_MTK_SPIM=y
+CONFIG_LZO=y
+CONFIG_HEXDUMP=y
+# CONFIG_EFI_LOADER is not set
--- /dev/null
+++ b/include/configs/mt7988.h
@@ -0,0 +1,14 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * Configuration for MediaTek MT7988 SoC
+ *
+ * Copyright (C) 2022 MediaTek Inc.
+ * Author: Sam Shih <sam.shih@mediatek.com>
+ */
+
+#ifndef __MT7988_H
+#define __MT7988_H
+
+#define CFG_MAX_MEM_MAPPED 0xC0000000
+
+#endif