ExternalVendorCode/openwrt
1
0
Fork 0
mirror of https://github.com/openwrt/openwrt.git synced 2024-12-22 15:02:32 +00:00
Code Issues Actions 2 Packages Projects Releases Wiki Activity
1d45ed1477
openwrt/target/linux/brcm2708/patches-4.19/950-0198-media-bcm2835-unicam-Driver-for-CCP2-CSI2-camera-int.patch
Álvaro Fernández Rojas 4295485719 brcm2708: add linux 4.19 support 
Boot tested on Raspberry Pi B+ (BCM2708) and Raspberry Pi 2 (BCM2709)

Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
2019-07-14 12:44:14 +02:00

2438 lines
68 KiB
Diff
Raw Blame History

From f37e8a66e3cd8eafc8b233ae250e2ac159b6870b Mon Sep 17 00:00:00 2001
From: Dave Stevenson <dave.stevenson@raspberrypi.org>
Date: Wed, 31 Oct 2018 14:59:22 +0000
Subject: [PATCH 198/703] media: bcm2835-unicam: Driver for CCP2/CSI2 camera
interface
Add driver for the Unicam camera receiver block on
BCM283x processors.
Signed-off-by: Dave Stevenson <dave.stevenson@raspberrypi.org>
---
drivers/media/platform/Kconfig | 1 +
drivers/media/platform/Makefile | 2 +
drivers/media/platform/bcm2835/Kconfig | 14 +
drivers/media/platform/bcm2835/Makefile | 3 +
.../media/platform/bcm2835/bcm2835-unicam.c | 2101 +++++++++++++++++
.../media/platform/bcm2835/vc4-regs-unicam.h | 266 +++
6 files changed, 2387 insertions(+)
create mode 100644 drivers/media/platform/bcm2835/Kconfig
create mode 100644 drivers/media/platform/bcm2835/Makefile
create mode 100644 drivers/media/platform/bcm2835/bcm2835-unicam.c
create mode 100644 drivers/media/platform/bcm2835/vc4-regs-unicam.h
--- a/drivers/media/platform/Kconfig
+++ b/drivers/media/platform/Kconfig
@@ -137,6 +137,7 @@ source "drivers/media/platform/am437x/Kc
source "drivers/media/platform/xilinx/Kconfig"
source "drivers/media/platform/rcar-vin/Kconfig"
source "drivers/media/platform/atmel/Kconfig"
+source "drivers/media/platform/bcm2835/Kconfig"
config VIDEO_TI_CAL
tristate "TI CAL (Camera Adaptation Layer) driver"
--- a/drivers/media/platform/Makefile
+++ b/drivers/media/platform/Makefile
@@ -96,3 +96,5 @@ obj-$(CONFIG_VIDEO_QCOM_VENUS) += qcom/
obj-y += meson/
obj-y += cros-ec-cec/
+
+obj-y += bcm2835/
--- /dev/null
+++ b/drivers/media/platform/bcm2835/Kconfig
@@ -0,0 +1,14 @@
+# Broadcom VideoCore4 V4L2 camera support
+
+config VIDEO_BCM2835_UNICAM
+ tristate "Broadcom BCM2835 Unicam video capture driver"
+ depends on VIDEO_V4L2 && VIDEO_V4L2_SUBDEV_API
+ depends on ARCH_BCM2835 || COMPILE_TEST
+ select VIDEOBUF2_DMA_CONTIG
+ select V4L2_FWNODE
+ help
+ Say Y here to enable V4L2 subdevice for CSI2 receiver.
+ This is a V4L2 subdevice that interfaces directly to the VC4 peripheral.
+
+ To compile this driver as a module, choose M here. The module
+ will be called bcm2835-unicam.
--- /dev/null
+++ b/drivers/media/platform/bcm2835/Makefile
@@ -0,0 +1,3 @@
+# Makefile for BCM2835 Unicam driver
+
+obj-$(CONFIG_VIDEO_BCM2835_UNICAM) += bcm2835-unicam.o
--- /dev/null
+++ b/drivers/media/platform/bcm2835/bcm2835-unicam.c
@@ -0,0 +1,2101 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * BCM2835 Unicam capture Driver
+ *
+ * Copyright (C) 2017 - Raspberry Pi (Trading) Ltd.
+ *
+ * Dave Stevenson <dave.stevenson@raspberrypi.org>
+ *
+ * Based on TI am437x driver by Benoit Parrot and Lad, Prabhakar and
+ * TI CAL camera interface driver by Benoit Parrot.
+ *
+ *
+ * There are two camera drivers in the kernel for BCM283x - this one
+ * and bcm2835-camera (currently in staging).
+ *
+ * This driver directly controls the Unicam peripheral - there is no
+ * involvement with the VideoCore firmware. Unicam receives CSI-2 or
+ * CCP2 data and writes it into SDRAM. The only potential processing options are
+ * to repack Bayer data into an alternate format, and applying windowing.
+ * The repacking does not shift the data, so could repack V4L2_PIX_FMT_Sxxxx10P
+ * to V4L2_PIX_FMT_Sxxxx10, or V4L2_PIX_FMT_Sxxxx12P to V4L2_PIX_FMT_Sxxxx12,
+ * but not generically up to V4L2_PIX_FMT_Sxxxx16.
+ * Adding support for repacking and windowing may be added later.
+ *
+ * It should be possible to connect this driver to any sensor with a
+ * suitable output interface and V4L2 subdevice driver.
+ *
+ * bcm2835-camera uses the VideoCore firmware to control the sensor,
+ * Unicam, ISP, and all tuner control loops. Fully processed frames are
+ * delivered to the driver by the firmware. It only has sensor drivers
+ * for Omnivision OV5647, and Sony IMX219 sensors.
+ *
+ * The two drivers are mutually exclusive for the same Unicam instance.
+ * The VideoCore firmware checks the device tree configuration during boot.
+ * If it finds device tree nodes called csi0 or csi1 it will block the
+ * firmware from accessing the peripheral, and bcm2835-camera will
+ * not be able to stream data.
+ *
+ *
+ * This program is free software; you may redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS
+ * BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN
+ * ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN
+ * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
+ * SOFTWARE.
+ */
+
+#include <linux/clk.h>
+#include <linux/delay.h>
+#include <linux/device.h>
+#include <linux/err.h>
+#include <linux/init.h>
+#include <linux/interrupt.h>
+#include <linux/io.h>
+#include <linux/module.h>
+#include <linux/of_device.h>
+#include <linux/of_graph.h>
+#include <linux/pinctrl/consumer.h>
+#include <linux/platform_device.h>
+#include <linux/pm_runtime.h>
+#include <linux/slab.h>
+#include <linux/uaccess.h>
+#include <linux/videodev2.h>
+
+#include <media/v4l2-common.h>
+#include <media/v4l2-ctrls.h>
+#include <media/v4l2-dev.h>
+#include <media/v4l2-device.h>
+#include <media/v4l2-dv-timings.h>
+#include <media/v4l2-event.h>
+#include <media/v4l2-ioctl.h>
+#include <media/v4l2-fwnode.h>
+#include <media/videobuf2-dma-contig.h>
+
+#include "vc4-regs-unicam.h"
+
+#define UNICAM_MODULE_NAME "unicam"
+#define UNICAM_VERSION "0.1.0"
+
+static int debug;
+module_param(debug, int, 0644);
+MODULE_PARM_DESC(debug, "Debug level 0-3");
+
+#define unicam_dbg(level, dev, fmt, arg...) \
+ v4l2_dbg(level, debug, &(dev)->v4l2_dev, fmt, ##arg)
+#define unicam_info(dev, fmt, arg...) \
+ v4l2_info(&(dev)->v4l2_dev, fmt, ##arg)
+#define unicam_err(dev, fmt, arg...) \
+ v4l2_err(&(dev)->v4l2_dev, fmt, ##arg)
+
+/*
+ * Stride is a 16 bit register, but also has to be a multiple of 16.
+ */
+#define BPL_ALIGNMENT 16
+#define MAX_BYTESPERLINE ((1 << 16) - BPL_ALIGNMENT)
+/*
+ * Max width is therefore determined by the max stride divided by
+ * the number of bits per pixel. Take 32bpp as a
+ * worst case.
+ * No imposed limit on the height, so adopt a square image for want
+ * of anything better.
+ */
+#define MAX_WIDTH (MAX_BYTESPERLINE / 4)
+#define MAX_HEIGHT MAX_WIDTH
+/* Define a nominal minimum image size */
+#define MIN_WIDTH 16
+#define MIN_HEIGHT 16
+/*
+ * Whilst Unicam doesn't require any additional padding on the image
+ * height, various other parts of the BCM283x frameworks require a multiple
+ * of 16.
+ * Seeing as image buffers are significantly larger than this extra
+ * padding, add it in order to simplify integration.
+ */
+#define HEIGHT_ALIGNMENT 16
+
+/*
+ * struct unicam_fmt - Unicam media bus format information
+ * @pixelformat: V4L2 pixel format FCC identifier.
+ * @code: V4L2 media bus format code.
+ * @depth: Bits per pixel (when stored in memory).
+ * @csi_dt: CSI data type.
+ */
+struct unicam_fmt {
+ u32 fourcc;
+ u32 code;
+ u8 depth;
+ u8 csi_dt;
+};
+
+static const struct unicam_fmt formats[] = {
+ /* YUV Formats */
+ {
+ .fourcc = V4L2_PIX_FMT_YUYV,
+ .code = MEDIA_BUS_FMT_YUYV8_2X8,
+ .depth = 16,
+ .csi_dt = 0x1e,
+ }, {
+ .fourcc = V4L2_PIX_FMT_UYVY,
+ .code = MEDIA_BUS_FMT_UYVY8_2X8,
+ .depth = 16,
+ .csi_dt = 0x1e,
+ }, {
+ .fourcc = V4L2_PIX_FMT_YVYU,
+ .code = MEDIA_BUS_FMT_YVYU8_2X8,
+ .depth = 16,
+ .csi_dt = 0x1e,
+ }, {
+ .fourcc = V4L2_PIX_FMT_VYUY,
+ .code = MEDIA_BUS_FMT_VYUY8_2X8,
+ .depth = 16,
+ .csi_dt = 0x1e,
+ }, {
+ .fourcc = V4L2_PIX_FMT_YUYV,
+ .code = MEDIA_BUS_FMT_YUYV8_1X16,
+ .depth = 16,
+ .csi_dt = 0x1e,
+ }, {
+ .fourcc = V4L2_PIX_FMT_UYVY,
+ .code = MEDIA_BUS_FMT_UYVY8_1X16,
+ .depth = 16,
+ .csi_dt = 0x1e,
+ }, {
+ .fourcc = V4L2_PIX_FMT_YVYU,
+ .code = MEDIA_BUS_FMT_YVYU8_1X16,
+ .depth = 16,
+ .csi_dt = 0x1e,
+ }, {
+ .fourcc = V4L2_PIX_FMT_VYUY,
+ .code = MEDIA_BUS_FMT_VYUY8_1X16,
+ .depth = 16,
+ .csi_dt = 0x1e,
+ }, {
+ /* RGB Formats */
+ .fourcc = V4L2_PIX_FMT_RGB565, /* gggbbbbb rrrrrggg */
+ .code = MEDIA_BUS_FMT_RGB565_2X8_LE,
+ .depth = 16,
+ .csi_dt = 0x22,
+ }, {
+ .fourcc = V4L2_PIX_FMT_RGB565X, /* rrrrrggg gggbbbbb */
+ .code = MEDIA_BUS_FMT_RGB565_2X8_BE,
+ .depth = 16,
+ .csi_dt = 0x22
+ }, {
+ .fourcc = V4L2_PIX_FMT_RGB555, /* gggbbbbb arrrrrgg */
+ .code = MEDIA_BUS_FMT_RGB555_2X8_PADHI_LE,
+ .depth = 16,
+ .csi_dt = 0x21,
+ }, {
+ .fourcc = V4L2_PIX_FMT_RGB555X, /* arrrrrgg gggbbbbb */
+ .code = MEDIA_BUS_FMT_RGB555_2X8_PADHI_BE,
+ .depth = 16,
+ .csi_dt = 0x21,
+ }, {
+ .fourcc = V4L2_PIX_FMT_RGB24, /* rgb */
+ .code = MEDIA_BUS_FMT_RGB888_1X24,
+ .depth = 24,
+ .csi_dt = 0x24,
+ }, {
+ .fourcc = V4L2_PIX_FMT_BGR24, /* bgr */
+ .code = MEDIA_BUS_FMT_BGR888_1X24,
+ .depth = 24,
+ .csi_dt = 0x24,
+ }, {
+ .fourcc = V4L2_PIX_FMT_RGB32, /* argb */
+ .code = MEDIA_BUS_FMT_ARGB8888_1X32,
+ .depth = 32,
+ .csi_dt = 0x0,
+ }, {
+ /* Bayer Formats */
+ .fourcc = V4L2_PIX_FMT_SBGGR8,
+ .code = MEDIA_BUS_FMT_SBGGR8_1X8,
+ .depth = 8,
+ .csi_dt = 0x2a,
+ }, {
+ .fourcc = V4L2_PIX_FMT_SGBRG8,
+ .code = MEDIA_BUS_FMT_SGBRG8_1X8,
+ .depth = 8,
+ .csi_dt = 0x2a,
+ }, {
+ .fourcc = V4L2_PIX_FMT_SGRBG8,
+ .code = MEDIA_BUS_FMT_SGRBG8_1X8,
+ .depth = 8,
+ .csi_dt = 0x2a,
+ }, {
+ .fourcc = V4L2_PIX_FMT_SRGGB8,
+ .code = MEDIA_BUS_FMT_SRGGB8_1X8,
+ .depth = 8,
+ .csi_dt = 0x2a,
+ }, {
+ .fourcc = V4L2_PIX_FMT_SBGGR10P,
+ .code = MEDIA_BUS_FMT_SBGGR10_1X10,
+ .depth = 10,
+ .csi_dt = 0x2b,
+ }, {
+ .fourcc = V4L2_PIX_FMT_SGBRG10P,
+ .code = MEDIA_BUS_FMT_SGBRG10_1X10,
+ .depth = 10,
+ .csi_dt = 0x2b,
+ }, {
+ .fourcc = V4L2_PIX_FMT_SGRBG10P,
+ .code = MEDIA_BUS_FMT_SGRBG10_1X10,
+ .depth = 10,
+ .csi_dt = 0x2b,
+ }, {
+ .fourcc = V4L2_PIX_FMT_SRGGB10P,
+ .code = MEDIA_BUS_FMT_SRGGB10_1X10,
+ .depth = 10,
+ .csi_dt = 0x2b,
+ }, {
+ .fourcc = V4L2_PIX_FMT_SBGGR12P,
+ .code = MEDIA_BUS_FMT_SBGGR12_1X12,
+ .depth = 12,
+ .csi_dt = 0x2c,
+ }, {
+ .fourcc = V4L2_PIX_FMT_SGBRG12P,
+ .code = MEDIA_BUS_FMT_SGBRG12_1X12,
+ .depth = 12,
+ .csi_dt = 0x2c,
+ }, {
+ .fourcc = V4L2_PIX_FMT_SGRBG12P,
+ .code = MEDIA_BUS_FMT_SGRBG12_1X12,
+ .depth = 12,
+ .csi_dt = 0x2c,
+ }, {
+ .fourcc = V4L2_PIX_FMT_SRGGB12P,
+ .code = MEDIA_BUS_FMT_SRGGB12_1X12,
+ .depth = 12,
+ .csi_dt = 0x2c,
+ },
+ /*
+ * 14 and 16 bit Bayer formats could be supported, but there are no V4L2
+ * defines for 14bit packed Bayer, and no CSI2 data_type for raw 16.
+ */
+};
+
+struct unicam_dmaqueue {
+ struct list_head active;
+};
+
+struct unicam_buffer {
+ struct vb2_v4l2_buffer vb;
+ struct list_head list;
+};
+
+struct unicam_cfg {
+ /* peripheral base address */
+ void __iomem *base;
+ /* clock gating base address */
+ void __iomem *clk_gate_base;
+};
+
+#define MAX_POSSIBLE_PIX_FMTS (ARRAY_SIZE(formats))
+
+struct unicam_device {
+ /* V4l2 specific parameters */
+ /* Identifies video device for this channel */
+ struct video_device video_dev;
+ struct v4l2_ctrl_handler ctrl_handler;
+
+ struct v4l2_fwnode_endpoint endpoint;
+
+ struct v4l2_async_subdev asd;
+
+ /* unicam cfg */
+ struct unicam_cfg cfg;
+ /* clock handle */
+ struct clk *clock;
+ /* V4l2 device */
+ struct v4l2_device v4l2_dev;
+ /* parent device */
+ struct platform_device *pdev;
+ /* subdevice async Notifier */
+ struct v4l2_async_notifier notifier;
+ unsigned int sequence;
+
+ /* ptr to sub device */
+ struct v4l2_subdev *sensor;
+ /* Pad config for the sensor */
+ struct v4l2_subdev_pad_config *sensor_config;
+ /* current input at the sub device */
+ int current_input;
+
+ /* Pointer pointing to current v4l2_buffer */
+ struct unicam_buffer *cur_frm;
+ /* Pointer pointing to next v4l2_buffer */
+ struct unicam_buffer *next_frm;
+
+ /* video capture */
+ const struct unicam_fmt *fmt;
+ /* Used to store current pixel format */
+ struct v4l2_format v_fmt;
+ /* Used to store current mbus frame format */
+ struct v4l2_mbus_framefmt m_fmt;
+
+ struct unicam_fmt active_fmts[MAX_POSSIBLE_PIX_FMTS];
+ int num_active_fmt;
+ unsigned int virtual_channel;
+ enum v4l2_mbus_type bus_type;
+ /*
+ * Stores bus.mipi_csi2.flags for CSI2 sensors, or
+ * bus.mipi_csi1.strobe for CCP2.
+ */
+ unsigned int bus_flags;
+ unsigned int max_data_lanes;
+ unsigned int active_data_lanes;
+
+ struct v4l2_rect crop;
+
+ /* Currently selected input on subdev */
+ int input;
+
+ /* Buffer queue used in video-buf */
+ struct vb2_queue buffer_queue;
+ /* Queue of filled frames */
+ struct unicam_dmaqueue dma_queue;
+ /* IRQ lock for DMA queue */
+ spinlock_t dma_queue_lock;
+ /* lock used to access this structure */
+ struct mutex lock;
+ /* Flag to denote that we are processing buffers */
+ int streaming;
+};
+
+/* Hardware access */
+#define clk_write(dev, val) writel((val) | 0x5a000000, (dev)->clk_gate_base)
+#define clk_read(dev) readl((dev)->clk_gate_base)
+
+#define reg_read(dev, offset) readl((dev)->base + (offset))
+#define reg_write(dev, offset, val) writel(val, (dev)->base + (offset))
+
+#define reg_read_field(dev, offset, mask) get_field(reg_read((dev), (offset), \
+ mask))
+
+static inline int get_field(u32 value, u32 mask)
+{
+ return (value & mask) >> __ffs(mask);
+}
+
+static inline void set_field(u32 *valp, u32 field, u32 mask)
+{
+ u32 val = *valp;
+
+ val &= ~mask;
+ val |= (field << __ffs(mask)) & mask;
+ *valp = val;
+}
+
+static inline void reg_write_field(struct unicam_cfg *dev, u32 offset,
+ u32 field, u32 mask)
+{
+ u32 val = reg_read((dev), (offset));
+
+ set_field(&val, field, mask);
+ reg_write((dev), (offset), val);
+}
+
+/* Power management functions */
+static inline int unicam_runtime_get(struct unicam_device *dev)
+{
+ int r;
+
+ r = pm_runtime_get_sync(&dev->pdev->dev);
+
+ return r;
+}
+
+static inline void unicam_runtime_put(struct unicam_device *dev)
+{
+ pm_runtime_put_sync(&dev->pdev->dev);
+}
+
+/* Format setup functions */
+static int find_mbus_depth_by_code(u32 code)
+{
+ const struct unicam_fmt *fmt;
+ unsigned int k;
+
+ for (k = 0; k < ARRAY_SIZE(formats); k++) {
+ fmt = &formats[k];
+ if (fmt->code == code)
+ return fmt->depth;
+ }
+
+ return 0;
+}
+
+static const struct unicam_fmt *find_format_by_code(struct unicam_device *dev,
+ u32 code)
+{
+ const struct unicam_fmt *fmt;
+ unsigned int k;
+
+ for (k = 0; k < dev->num_active_fmt; k++) {
+ fmt = &dev->active_fmts[k];
+ if (fmt->code == code)
+ return fmt;
+ }
+
+ return NULL;
+}
+
+static const struct unicam_fmt *find_format_by_pix(struct unicam_device *dev,
+ u32 pixelformat)
+{
+ const struct unicam_fmt *fmt;
+ unsigned int k;
+
+ for (k = 0; k < dev->num_active_fmt; k++) {
+ fmt = &dev->active_fmts[k];
+ if (fmt->fourcc == pixelformat)
+ return fmt;
+ }
+
+ return NULL;
+}
+
+static void dump_active_formats(struct unicam_device *dev)
+{
+ int i;
+
+ for (i = 0; i < dev->num_active_fmt; i++) {
+ unicam_dbg(3, dev, "active_fmt[%d] (%p) is code %04x, fourcc " V4L2_FOURCC_CONV ", depth %d\n",
+ i, &dev->active_fmts[i], dev->active_fmts[i].code,
+ V4L2_FOURCC_CONV_ARGS(dev->active_fmts[i].fourcc),
+ dev->active_fmts[i].depth);
+ }
+}
+
+static inline unsigned int bytes_per_line(u32 width,
+ const struct unicam_fmt *fmt)
+{
+ return ALIGN((width * fmt->depth) >> 3, BPL_ALIGNMENT);
+}
+
+static int __subdev_get_format(struct unicam_device *dev,
+ struct v4l2_mbus_framefmt *fmt)
+{
+ struct v4l2_subdev_format sd_fmt = {0};
+ struct v4l2_mbus_framefmt *mbus_fmt = &sd_fmt.format;
+ int ret;
+
+ sd_fmt.which = V4L2_SUBDEV_FORMAT_ACTIVE;
+ sd_fmt.pad = 0;
+
+ ret = v4l2_subdev_call(dev->sensor, pad, get_fmt, dev->sensor_config,
+ &sd_fmt);
+ if (ret < 0)
+ return ret;
+
+ *fmt = *mbus_fmt;
+
+ unicam_dbg(1, dev, "%s %dx%d code:%04x\n", __func__,
+ fmt->width, fmt->height, fmt->code);
+
+ return 0;
+}
+
+static int __subdev_set_format(struct unicam_device *dev,
+ struct v4l2_mbus_framefmt *fmt)
+{
+ struct v4l2_subdev_format sd_fmt = {
+ .which = V4L2_SUBDEV_FORMAT_ACTIVE,
+ };
+ struct v4l2_mbus_framefmt *mbus_fmt = &sd_fmt.format;
+ int ret;
+
+ *mbus_fmt = *fmt;
+
+ ret = v4l2_subdev_call(dev->sensor, pad, set_fmt, dev->sensor_config,
+ &sd_fmt);
+ if (ret < 0)
+ return ret;
+
+ unicam_dbg(1, dev, "%s %dx%d code:%04x\n", __func__,
+ fmt->width, fmt->height, fmt->code);
+
+ return 0;
+}
+
+static int unicam_calc_format_size_bpl(struct unicam_device *dev,
+ const struct unicam_fmt *fmt,
+ struct v4l2_format *f)
+{
+ unsigned int min_bytesperline;
+
+ v4l_bound_align_image(&f->fmt.pix.width, MIN_WIDTH, MAX_WIDTH, 2,
+ &f->fmt.pix.height, MIN_HEIGHT, MAX_HEIGHT, 0,
+ 0);
+
+ min_bytesperline = bytes_per_line(f->fmt.pix.width, fmt);
+
+ if (f->fmt.pix.bytesperline > min_bytesperline &&
+ f->fmt.pix.bytesperline <= MAX_BYTESPERLINE)
+ f->fmt.pix.bytesperline = ALIGN(f->fmt.pix.bytesperline,
+ BPL_ALIGNMENT);
+ else
+ f->fmt.pix.bytesperline = min_bytesperline;
+
+ /* Align height up for compatibility with other hardware blocks */
+ f->fmt.pix.sizeimage = ALIGN(f->fmt.pix.height, HEIGHT_ALIGNMENT) *
+ f->fmt.pix.bytesperline;
+
+ unicam_dbg(3, dev, "%s: fourcc: " V4L2_FOURCC_CONV " size: %dx%d bpl:%d img_size:%d\n",
+ __func__,
+ V4L2_FOURCC_CONV_ARGS(f->fmt.pix.pixelformat),
+ f->fmt.pix.width, f->fmt.pix.height,
+ f->fmt.pix.bytesperline, f->fmt.pix.sizeimage);
+
+ return 0;
+}
+
+static int unicam_reset_format(struct unicam_device *dev)
+{
+ struct v4l2_mbus_framefmt mbus_fmt;
+ int ret;
+
+ ret = __subdev_get_format(dev, &mbus_fmt);
+ if (ret) {
+ unicam_err(dev, "Failed to get_format - ret %d\n", ret);
+ return ret;
+ }
+
+ if (mbus_fmt.code != dev->fmt->code) {
+ unicam_err(dev, "code mismatch - fmt->code %08x, mbus_fmt.code %08x\n",
+ dev->fmt->code, mbus_fmt.code);
+ return ret;
+ }
+
+ v4l2_fill_pix_format(&dev->v_fmt.fmt.pix, &mbus_fmt);
+ dev->v_fmt.type = V4L2_BUF_TYPE_VIDEO_CAPTURE;
+
+ unicam_calc_format_size_bpl(dev, dev->fmt, &dev->v_fmt);
+
+ dev->m_fmt = mbus_fmt;
+
+ return 0;
+}
+
+static void unicam_wr_dma_addr(struct unicam_device *dev, unsigned int dmaaddr)
+{
+ unicam_dbg(1, dev, "wr_dma_addr %08x-%08x\n",
+ dmaaddr, dmaaddr + dev->v_fmt.fmt.pix.sizeimage);
+ reg_write(&dev->cfg, UNICAM_IBSA0, dmaaddr);
+ reg_write(&dev->cfg, UNICAM_IBEA0,
+ dmaaddr + dev->v_fmt.fmt.pix.sizeimage);
+}
+
+static inline void unicam_schedule_next_buffer(struct unicam_device *dev)
+{
+ struct unicam_dmaqueue *dma_q = &dev->dma_queue;
+ struct unicam_buffer *buf;
+ dma_addr_t addr;
+
+ buf = list_entry(dma_q->active.next, struct unicam_buffer, list);
+ dev->next_frm = buf;
+ list_del(&buf->list);
+
+ addr = vb2_dma_contig_plane_dma_addr(&buf->vb.vb2_buf, 0);
+ unicam_wr_dma_addr(dev, addr);
+}
+
+static inline void unicam_process_buffer_complete(struct unicam_device *dev)
+{
+ dev->cur_frm->vb.field = dev->m_fmt.field;
+ dev->cur_frm->vb.sequence = dev->sequence++;
+
+ vb2_buffer_done(&dev->cur_frm->vb.vb2_buf, VB2_BUF_STATE_DONE);
+ dev->cur_frm = dev->next_frm;
+}
+
+/*
+ * unicam_isr : ISR handler for unicam capture
+ * @irq: irq number
+ * @dev_id: dev_id ptr
+ *
+ * It changes status of the captured buffer, takes next buffer from the queue
+ * and sets its address in unicam registers
+ */
+static irqreturn_t unicam_isr(int irq, void *dev)
+{
+ struct unicam_device *unicam = (struct unicam_device *)dev;
+ struct unicam_cfg *cfg = &unicam->cfg;
+ struct unicam_dmaqueue *dma_q = &unicam->dma_queue;
+ int ista, sta;
+
+ /*
+ * Don't service interrupts if not streaming.
+ * Avoids issues if the VPU should enable the
+ * peripheral without the kernel knowing (that
+ * shouldn't happen, but causes issues if it does).
+ */
+ if (!unicam->streaming)
+ return IRQ_HANDLED;
+
+ sta = reg_read(cfg, UNICAM_STA);
+ /* Write value back to clear the interrupts */
+ reg_write(cfg, UNICAM_STA, sta);
+
+ ista = reg_read(cfg, UNICAM_ISTA);
+ /* Write value back to clear the interrupts */
+ reg_write(cfg, UNICAM_ISTA, ista);
+
+ if (!(sta && (UNICAM_IS | UNICAM_PI0)))
+ return IRQ_HANDLED;
+
+ if (ista & UNICAM_FSI) {
+ /*
+ * Timestamp is to be when the first data byte was captured,
+ * aka frame start.
+ */
+ if (unicam->cur_frm)
+ unicam->cur_frm->vb.vb2_buf.timestamp = ktime_get_ns();
+ }
+ if (ista & UNICAM_FEI || sta & UNICAM_PI0) {
+ /*
+ * Ensure we have swapped buffers already as we can't
+ * stop the peripheral. Overwrite the frame we've just
+ * captured instead.
+ */
+ if (unicam->cur_frm && unicam->cur_frm != unicam->next_frm)
+ unicam_process_buffer_complete(unicam);
+ }
+
+ if (ista & (UNICAM_FSI | UNICAM_LCI)) {
+ spin_lock(&unicam->dma_queue_lock);
+ if (!list_empty(&dma_q->active) &&
+ unicam->cur_frm == unicam->next_frm)
+ unicam_schedule_next_buffer(unicam);
+ spin_unlock(&unicam->dma_queue_lock);
+ }
+
+ if (reg_read(&unicam->cfg, UNICAM_ICTL) & UNICAM_FCM) {
+ /* Switch out of trigger mode if selected */
+ reg_write_field(&unicam->cfg, UNICAM_ICTL, 1, UNICAM_TFC);
+ reg_write_field(&unicam->cfg, UNICAM_ICTL, 0, UNICAM_FCM);
+ }
+ return IRQ_HANDLED;
+}
+
+static int unicam_querycap(struct file *file, void *priv,
+ struct v4l2_capability *cap)
+{
+ struct unicam_device *dev = video_drvdata(file);
+
+ strlcpy(cap->driver, UNICAM_MODULE_NAME, sizeof(cap->driver));
+ strlcpy(cap->card, UNICAM_MODULE_NAME, sizeof(cap->card));
+
+ snprintf(cap->bus_info, sizeof(cap->bus_info),
+ "platform:%s", dev->v4l2_dev.name);
+
+ return 0;
+}
+
+static int unicam_enum_fmt_vid_cap(struct file *file, void *priv,
+ struct v4l2_fmtdesc *f)
+{
+ struct unicam_device *dev = video_drvdata(file);
+ const struct unicam_fmt *fmt = NULL;
+
+ if (f->index >= dev->num_active_fmt)
+ return -EINVAL;
+
+ fmt = &dev->active_fmts[f->index];
+
+ f->pixelformat = fmt->fourcc;
+
+ return 0;
+}
+
+static int unicam_g_fmt_vid_cap(struct file *file, void *priv,
+ struct v4l2_format *f)
+{
+ struct unicam_device *dev = video_drvdata(file);
+
+ *f = dev->v_fmt;
+
+ return 0;
+}
+
+static int unicam_try_fmt_vid_cap(struct file *file, void *priv,
+ struct v4l2_format *f)
+{
+ struct unicam_device *dev = video_drvdata(file);
+ const struct unicam_fmt *fmt;
+ struct v4l2_subdev_format sd_fmt = {
+ .which = V4L2_SUBDEV_FORMAT_TRY,
+ };
+ struct v4l2_mbus_framefmt *mbus_fmt = &sd_fmt.format;
+ int ret;
+
+ fmt = find_format_by_pix(dev, f->fmt.pix.pixelformat);
+ if (!fmt) {
+ unicam_dbg(3, dev, "Fourcc format (0x%08x) not found. Use default of %08X\n",
+ f->fmt.pix.pixelformat, dev->active_fmts[0].fourcc);
+
+ /* Just get the first one enumerated */
+ fmt = &dev->active_fmts[0];
+ f->fmt.pix.pixelformat = fmt->fourcc;
+ }
+
+ v4l2_fill_mbus_format(mbus_fmt, &f->fmt.pix, fmt->code);
+ /*
+ * No support for receiving interlaced video, so never
+ * request it from the sensor subdev.
+ */
+ mbus_fmt->field = V4L2_FIELD_NONE;
+
+ ret = v4l2_subdev_call(dev->sensor, pad, set_fmt, dev->sensor_config,
+ &sd_fmt);
+ if (ret && ret != -ENOIOCTLCMD && ret != -ENODEV)
+ return ret;
+
+ if (mbus_fmt->field != V4L2_FIELD_NONE)
+ unicam_info(dev, "Sensor trying to send interlaced video - results may be unpredictable\n");
+
+ v4l2_fill_pix_format(&f->fmt.pix, &sd_fmt.format);
+ /*
+ * Use current colorspace for now, it will get
+ * updated properly during s_fmt
+ */
+ f->fmt.pix.colorspace = dev->v_fmt.fmt.pix.colorspace;
+ return unicam_calc_format_size_bpl(dev, fmt, f);
+}
+
+static int unicam_s_fmt_vid_cap(struct file *file, void *priv,
+ struct v4l2_format *f)
+{
+ struct unicam_device *dev = video_drvdata(file);
+ struct vb2_queue *q = &dev->buffer_queue;
+ const struct unicam_fmt *fmt;
+ struct v4l2_mbus_framefmt mbus_fmt = {0};
+ int ret;
+
+ if (vb2_is_busy(q))
+ return -EBUSY;
+
+ ret = unicam_try_fmt_vid_cap(file, priv, f);
+ if (ret < 0)
+ return ret;
+
+ fmt = find_format_by_pix(dev, f->fmt.pix.pixelformat);
+ if (!fmt) {
+ /* Unknown pixel format - adopt a default */
+ fmt = &dev->active_fmts[0];
+ f->fmt.pix.pixelformat = fmt->fourcc;
+ return -EINVAL;
+ }
+
+ v4l2_fill_mbus_format(&mbus_fmt, &f->fmt.pix, fmt->code);
+
+ ret = __subdev_set_format(dev, &mbus_fmt);
+ if (ret) {
+ unicam_dbg(3, dev, "%s __subdev_set_format failed %d\n",
+ __func__, ret);
+ return ret;
+ }
+
+ /* Just double check nothing has gone wrong */
+ if (mbus_fmt.code != fmt->code) {
+ unicam_dbg(3, dev,
+ "%s subdev changed format on us, this should not happen\n",
+ __func__);
+ return -EINVAL;
+ }
+
+ dev->fmt = fmt;
+ dev->v_fmt.fmt.pix.pixelformat = f->fmt.pix.pixelformat;
+ dev->v_fmt.fmt.pix.bytesperline = f->fmt.pix.bytesperline;
+ unicam_reset_format(dev);
+
+ unicam_dbg(3, dev, "%s %dx%d, mbus_fmt %08X, V4L2 pix " V4L2_FOURCC_CONV ".\n",
+ __func__, dev->v_fmt.fmt.pix.width,
+ dev->v_fmt.fmt.pix.height, mbus_fmt.code,
+ V4L2_FOURCC_CONV_ARGS(dev->v_fmt.fmt.pix.pixelformat));
+
+ *f = dev->v_fmt;
+
+ return 0;
+}
+
+static int unicam_queue_setup(struct vb2_queue *vq,
+ unsigned int *nbuffers,
+ unsigned int *nplanes,
+ unsigned int sizes[],
+ struct device *alloc_devs[])
+{
+ struct unicam_device *dev = vb2_get_drv_priv(vq);
+ unsigned int size = dev->v_fmt.fmt.pix.sizeimage;
+
+ if (vq->num_buffers + *nbuffers < 3)
+ *nbuffers = 3 - vq->num_buffers;
+
+ if (*nplanes) {
+ if (sizes[0] < size) {
+ unicam_err(dev, "sizes[0] %i < size %u\n", sizes[0],
+ size);
+ return -EINVAL;
+ }
+ size = sizes[0];
+ }
+
+ *nplanes = 1;
+ sizes[0] = size;
+
+ return 0;
+}
+
+static int unicam_buffer_prepare(struct vb2_buffer *vb)
+{
+ struct unicam_device *dev = vb2_get_drv_priv(vb->vb2_queue);
+ struct unicam_buffer *buf = container_of(vb, struct unicam_buffer,
+ vb.vb2_buf);
+ unsigned long size;
+
+ if (WARN_ON(!dev->fmt))
+ return -EINVAL;
+
+ size = dev->v_fmt.fmt.pix.sizeimage;
+ if (vb2_plane_size(vb, 0) < size) {
+ unicam_err(dev, "data will not fit into plane (%lu < %lu)\n",
+ vb2_plane_size(vb, 0), size);
+ return -EINVAL;
+ }
+
+ vb2_set_plane_payload(&buf->vb.vb2_buf, 0, size);
+ return 0;
+}
+
+static void unicam_buffer_queue(struct vb2_buffer *vb)
+{
+ struct unicam_device *dev = vb2_get_drv_priv(vb->vb2_queue);
+ struct unicam_buffer *buf = container_of(vb, struct unicam_buffer,
+ vb.vb2_buf);
+ struct unicam_dmaqueue *dma_queue = &dev->dma_queue;
+ unsigned long flags = 0;
+
+ /* recheck locking */
+ spin_lock_irqsave(&dev->dma_queue_lock, flags);
+ list_add_tail(&buf->list, &dma_queue->active);
+ spin_unlock_irqrestore(&dev->dma_queue_lock, flags);
+}
+
+static void unicam_wr_dma_config(struct unicam_device *dev,
+ unsigned int stride)
+{
+ reg_write(&dev->cfg, UNICAM_IBLS, stride);
+}
+
+static void unicam_set_packing_config(struct unicam_device *dev)
+{
+ int mbus_depth = find_mbus_depth_by_code(dev->fmt->code);
+ int v4l2_depth = dev->fmt->depth;
+ int pack, unpack;
+ u32 val;
+
+ if (mbus_depth == v4l2_depth) {
+ unpack = UNICAM_PUM_NONE;
+ pack = UNICAM_PPM_NONE;
+ } else {
+ switch (mbus_depth) {
+ case 8:
+ unpack = UNICAM_PUM_UNPACK8;
+ break;
+ case 10:
+ unpack = UNICAM_PUM_UNPACK10;
+ break;
+ case 12:
+ unpack = UNICAM_PUM_UNPACK12;
+ break;
+ case 14:
+ unpack = UNICAM_PUM_UNPACK14;
+ break;
+ case 16:
+ unpack = UNICAM_PUM_UNPACK16;
+ break;
+ default:
+ unpack = UNICAM_PUM_NONE;
+ break;
+ }
+ switch (v4l2_depth) {
+ case 8:
+ pack = UNICAM_PPM_PACK8;
+ break;
+ case 10:
+ pack = UNICAM_PPM_PACK10;
+ break;
+ case 12:
+ pack = UNICAM_PPM_PACK12;
+ break;
+ case 14:
+ pack = UNICAM_PPM_PACK14;
+ break;
+ case 16:
+ pack = UNICAM_PPM_PACK16;
+ break;
+ default:
+ pack = UNICAM_PPM_NONE;
+ break;
+ }
+ }
+
+ val = 0;
+ set_field(&val, 2, UNICAM_DEBL_MASK);
+ set_field(&val, unpack, UNICAM_PUM_MASK);
+ set_field(&val, pack, UNICAM_PPM_MASK);
+ reg_write(&dev->cfg, UNICAM_IPIPE, val);
+}
+
+static void unicam_cfg_image_id(struct unicam_device *dev)
+{
+ struct unicam_cfg *cfg = &dev->cfg;
+
+ if (dev->bus_type == V4L2_MBUS_CSI2) {
+ /* CSI2 mode */
+ reg_write(cfg, UNICAM_IDI0,
+ (dev->virtual_channel << 6) | dev->fmt->csi_dt);
+ } else {
+ /* CCP2 mode */
+ reg_write(cfg, UNICAM_IDI0, (0x80 | dev->fmt->csi_dt));
+ }
+}
+
+void unicam_start_rx(struct unicam_device *dev, unsigned long addr)
+{
+ struct unicam_cfg *cfg = &dev->cfg;
+ int line_int_freq = dev->v_fmt.fmt.pix.height >> 2;
+ unsigned int i;
+ u32 val;
+
+ if (line_int_freq < 128)
+ line_int_freq = 128;
+
+ /* Enable lane clocks */
+ val = 1;
+ for (i = 0; i < dev->active_data_lanes; i++)
+ val = val << 2 | 1;
+ clk_write(cfg, val);
+
+ /* Basic init */
+ reg_write(cfg, UNICAM_CTRL, UNICAM_MEM);
+
+ /* Enable analogue control, and leave in reset. */
+ val = UNICAM_AR;
+ set_field(&val, 7, UNICAM_CTATADJ_MASK);
+ set_field(&val, 7, UNICAM_PTATADJ_MASK);
+ reg_write(cfg, UNICAM_ANA, val);
+ usleep_range(1000, 2000);
+
+ /* Come out of reset */
+ reg_write_field(cfg, UNICAM_ANA, 0, UNICAM_AR);
+
+ /* Peripheral reset */
+ reg_write_field(cfg, UNICAM_CTRL, 1, UNICAM_CPR);
+ reg_write_field(cfg, UNICAM_CTRL, 0, UNICAM_CPR);
+
+ reg_write_field(cfg, UNICAM_CTRL, 0, UNICAM_CPE);
+
+ /* Enable Rx control. */
+ val = reg_read(cfg, UNICAM_CTRL);
+ if (dev->bus_type == V4L2_MBUS_CSI2) {
+ set_field(&val, UNICAM_CPM_CSI2, UNICAM_CPM_MASK);
+ set_field(&val, UNICAM_DCM_STROBE, UNICAM_DCM_MASK);
+ } else {
+ set_field(&val, UNICAM_CPM_CCP2, UNICAM_CPM_MASK);
+ set_field(&val, dev->bus_flags, UNICAM_DCM_MASK);
+ }
+ /* Packet framer timeout */
+ set_field(&val, 0xf, UNICAM_PFT_MASK);
+ set_field(&val, 128, UNICAM_OET_MASK);
+ reg_write(cfg, UNICAM_CTRL, val);
+
+ reg_write(cfg, UNICAM_IHWIN, 0);
+ reg_write(cfg, UNICAM_IVWIN, 0);
+
+ /* AXI bus access QoS setup */
+ val = reg_read(&dev->cfg, UNICAM_PRI);
+ set_field(&val, 0, UNICAM_BL_MASK);
+ set_field(&val, 0, UNICAM_BS_MASK);
+ set_field(&val, 0xe, UNICAM_PP_MASK);
+ set_field(&val, 8, UNICAM_NP_MASK);
+ set_field(&val, 2, UNICAM_PT_MASK);
+ set_field(&val, 1, UNICAM_PE);
+ reg_write(cfg, UNICAM_PRI, val);
+
+ reg_write_field(cfg, UNICAM_ANA, 0, UNICAM_DDL);
+
+ /* Always start in trigger frame capture mode (UNICAM_FCM set) */
+ val = UNICAM_FSIE | UNICAM_FEIE | UNICAM_FCM;
+ set_field(&val, line_int_freq, UNICAM_LCIE_MASK);
+ reg_write(cfg, UNICAM_ICTL, val);
+ reg_write(cfg, UNICAM_STA, UNICAM_STA_MASK_ALL);
+ reg_write(cfg, UNICAM_ISTA, UNICAM_ISTA_MASK_ALL);
+
+ /* tclk_term_en */
+ reg_write_field(cfg, UNICAM_CLT, 2, UNICAM_CLT1_MASK);
+ /* tclk_settle */
+ reg_write_field(cfg, UNICAM_CLT, 6, UNICAM_CLT2_MASK);
+ /* td_term_en */
+ reg_write_field(cfg, UNICAM_DLT, 2, UNICAM_DLT1_MASK);
+ /* ths_settle */
+ reg_write_field(cfg, UNICAM_DLT, 6, UNICAM_DLT2_MASK);
+ /* trx_enable */
+ reg_write_field(cfg, UNICAM_DLT, 0, UNICAM_DLT3_MASK);
+
+ reg_write_field(cfg, UNICAM_CTRL, 0, UNICAM_SOE);
+
+ /* Packet compare setup - required to avoid missing frame ends */
+ val = 0;
+ set_field(&val, 1, UNICAM_PCE);
+ set_field(&val, 1, UNICAM_GI);
+ set_field(&val, 1, UNICAM_CPH);
+ set_field(&val, 0, UNICAM_PCVC_MASK);
+ set_field(&val, 1, UNICAM_PCDT_MASK);
+ reg_write(cfg, UNICAM_CMP0, val);
+
+ /* Enable clock lane and set up terminations */
+ val = 0;
+ if (dev->bus_type == V4L2_MBUS_CSI2) {
+ /* CSI2 */
+ set_field(&val, 1, UNICAM_CLE);
+ set_field(&val, 1, UNICAM_CLLPE);
+ if (dev->bus_flags & V4L2_MBUS_CSI2_CONTINUOUS_CLOCK) {
+ set_field(&val, 1, UNICAM_CLTRE);
+ set_field(&val, 1, UNICAM_CLHSE);
+ }
+ } else {
+ /* CCP2 */
+ set_field(&val, 1, UNICAM_CLE);
+ set_field(&val, 1, UNICAM_CLHSE);
+ set_field(&val, 1, UNICAM_CLTRE);
+ }
+ reg_write(cfg, UNICAM_CLK, val);
+
+ /*
+ * Enable required data lanes with appropriate terminations.
+ * The same value needs to be written to UNICAM_DATn registers for
+ * the active lanes, and 0 for inactive ones.
+ */
+ val = 0;
+ if (dev->bus_type == V4L2_MBUS_CSI2) {
+ /* CSI2 */
+ set_field(&val, 1, UNICAM_DLE);
+ set_field(&val, 1, UNICAM_DLLPE);
+ if (dev->bus_flags & V4L2_MBUS_CSI2_CONTINUOUS_CLOCK) {
+ set_field(&val, 1, UNICAM_DLTRE);
+ set_field(&val, 1, UNICAM_DLHSE);
+ }
+ } else {
+ /* CCP2 */
+ set_field(&val, 1, UNICAM_DLE);
+ set_field(&val, 1, UNICAM_DLHSE);
+ set_field(&val, 1, UNICAM_DLTRE);
+ }
+ reg_write(cfg, UNICAM_DAT0, val);
+
+ if (dev->active_data_lanes == 1)
+ val = 0;
+ reg_write(cfg, UNICAM_DAT1, val);
+
+ if (dev->max_data_lanes > 2) {
+ /*
+ * Registers UNICAM_DAT2 and UNICAM_DAT3 only valid if the
+ * instance supports more than 2 data lanes.
+ */
+ if (dev->active_data_lanes == 2)
+ val = 0;
+ reg_write(cfg, UNICAM_DAT2, val);
+
+ if (dev->active_data_lanes == 3)
+ val = 0;
+ reg_write(cfg, UNICAM_DAT3, val);
+ }
+
+ unicam_wr_dma_config(dev, dev->v_fmt.fmt.pix.bytesperline);
+ unicam_wr_dma_addr(dev, addr);
+ unicam_set_packing_config(dev);
+ unicam_cfg_image_id(dev);
+
+ /* Disabled embedded data */
+ val = 0;
+ set_field(&val, 0, UNICAM_EDL_MASK);
+ reg_write(cfg, UNICAM_DCS, val);
+
+ val = reg_read(cfg, UNICAM_MISC);
+ set_field(&val, 1, UNICAM_FL0);
+ set_field(&val, 1, UNICAM_FL1);
+ reg_write(cfg, UNICAM_MISC, val);
+
+ /* Enable peripheral */
+ reg_write_field(cfg, UNICAM_CTRL, 1, UNICAM_CPE);
+
+ /* Load image pointers */
+ reg_write_field(cfg, UNICAM_ICTL, 1, UNICAM_LIP_MASK);
+
+ /*
+ * Enable trigger only for the first frame to
+ * sync correctly to the FS from the source.
+ */
+ reg_write_field(cfg, UNICAM_ICTL, 1, UNICAM_TFC);
+}
+
+static void unicam_disable(struct unicam_device *dev)
+{
+ struct unicam_cfg *cfg = &dev->cfg;
+
+ /* Analogue lane control disable */
+ reg_write_field(cfg, UNICAM_ANA, 1, UNICAM_DDL);
+
+ /* Stop the output engine */
+ reg_write_field(cfg, UNICAM_CTRL, 1, UNICAM_SOE);
+
+ /* Disable the data lanes. */
+ reg_write(cfg, UNICAM_DAT0, 0);
+ reg_write(cfg, UNICAM_DAT1, 0);
+
+ if (dev->max_data_lanes > 2) {
+ reg_write(cfg, UNICAM_DAT2, 0);
+ reg_write(cfg, UNICAM_DAT3, 0);
+ }
+
+ /* Peripheral reset */
+ reg_write_field(cfg, UNICAM_CTRL, 1, UNICAM_CPR);
+ usleep_range(50, 100);
+ reg_write_field(cfg, UNICAM_CTRL, 0, UNICAM_CPR);
+
+ /* Disable peripheral */
+ reg_write_field(cfg, UNICAM_CTRL, 0, UNICAM_CPE);
+
+ /* Disable all lane clocks */
+ clk_write(cfg, 0);
+}
+
+static int unicam_start_streaming(struct vb2_queue *vq, unsigned int count)
+{
+ struct unicam_device *dev = vb2_get_drv_priv(vq);
+ struct unicam_dmaqueue *dma_q = &dev->dma_queue;
+ struct unicam_buffer *buf, *tmp;
+ unsigned long addr = 0;
+ unsigned long flags;
+ int ret;
+
+ spin_lock_irqsave(&dev->dma_queue_lock, flags);
+ buf = list_entry(dma_q->active.next, struct unicam_buffer, list);
+ dev->cur_frm = buf;
+ dev->next_frm = buf;
+ list_del(&buf->list);
+ spin_unlock_irqrestore(&dev->dma_queue_lock, flags);
+
+ addr = vb2_dma_contig_plane_dma_addr(&dev->cur_frm->vb.vb2_buf, 0);
+ dev->sequence = 0;
+
+ ret = unicam_runtime_get(dev);
+ if (ret < 0) {
+ unicam_dbg(3, dev, "unicam_runtime_get failed\n");
+ goto err_release_buffers;
+ }
+
+ dev->active_data_lanes = dev->max_data_lanes;
+ if (dev->bus_type == V4L2_MBUS_CSI2 &&
+ v4l2_subdev_has_op(dev->sensor, video, g_mbus_config)) {
+ struct v4l2_mbus_config mbus_config;
+
+ ret = v4l2_subdev_call(dev->sensor, video, g_mbus_config,
+ &mbus_config);
+ if (ret < 0) {
+ unicam_dbg(3, dev, "g_mbus_config failed\n");
+ goto err_pm_put;
+ }
+
+ dev->active_data_lanes =
+ (mbus_config.flags & V4L2_MBUS_CSI2_LANE_MASK) >>
+ __ffs(V4L2_MBUS_CSI2_LANE_MASK);
+ if (!dev->active_data_lanes)
+ dev->active_data_lanes = dev->max_data_lanes;
+ }
+ if (dev->active_data_lanes > dev->max_data_lanes) {
+ unicam_err(dev, "Device has requested %u data lanes, which is >%u configured in DT\n",
+ dev->active_data_lanes, dev->max_data_lanes);
+ ret = -EINVAL;
+ goto err_pm_put;
+ }
+
+ unicam_dbg(1, dev, "Running with %u data lanes\n",
+ dev->active_data_lanes);
+
+ ret = clk_set_rate(dev->clock, 100 * 1000 * 1000);
+ if (ret) {
+ unicam_err(dev, "failed to set up clock\n");
+ goto err_pm_put;
+ }
+
+ ret = clk_prepare_enable(dev->clock);
+ if (ret) {
+ unicam_err(dev, "Failed to enable CSI clock: %d\n", ret);
+ goto err_pm_put;
+ }
+ ret = v4l2_subdev_call(dev->sensor, core, s_power, 1);
+ if (ret < 0 && ret != -ENOIOCTLCMD) {
+ unicam_err(dev, "power on failed in subdev\n");
+ goto err_clock_unprepare;
+ }
+ dev->streaming = 1;
+
+ unicam_start_rx(dev, addr);
+
+ ret = v4l2_subdev_call(dev->sensor, video, s_stream, 1);
+ if (ret < 0) {
+ unicam_err(dev, "stream on failed in subdev\n");
+ goto err_disable_unicam;
+ }
+
+ return 0;
+
+err_disable_unicam:
+ unicam_disable(dev);
+ v4l2_subdev_call(dev->sensor, core, s_power, 0);
+err_clock_unprepare:
+ clk_disable_unprepare(dev->clock);
+err_pm_put:
+ unicam_runtime_put(dev);
+err_release_buffers:
+ list_for_each_entry_safe(buf, tmp, &dma_q->active, list) {
+ list_del(&buf->list);
+ vb2_buffer_done(&buf->vb.vb2_buf, VB2_BUF_STATE_QUEUED);
+ }
+ if (dev->cur_frm != dev->next_frm)
+ vb2_buffer_done(&dev->next_frm->vb.vb2_buf,
+ VB2_BUF_STATE_QUEUED);
+ vb2_buffer_done(&dev->cur_frm->vb.vb2_buf, VB2_BUF_STATE_QUEUED);
+ dev->next_frm = NULL;
+ dev->cur_frm = NULL;
+
+ return ret;
+}
+
+static void unicam_stop_streaming(struct vb2_queue *vq)
+{
+ struct unicam_device *dev = vb2_get_drv_priv(vq);
+ struct unicam_dmaqueue *dma_q = &dev->dma_queue;
+ struct unicam_buffer *buf, *tmp;
+ unsigned long flags;
+
+ if (v4l2_subdev_call(dev->sensor, video, s_stream, 0) < 0)
+ unicam_err(dev, "stream off failed in subdev\n");
+
+ unicam_disable(dev);
+
+ /* Release all active buffers */
+ spin_lock_irqsave(&dev->dma_queue_lock, flags);
+ list_for_each_entry_safe(buf, tmp, &dma_q->active, list) {
+ list_del(&buf->list);
+ vb2_buffer_done(&buf->vb.vb2_buf, VB2_BUF_STATE_ERROR);
+ }
+
+ if (dev->cur_frm == dev->next_frm) {
+ vb2_buffer_done(&dev->cur_frm->vb.vb2_buf, VB2_BUF_STATE_ERROR);
+ } else {
+ vb2_buffer_done(&dev->cur_frm->vb.vb2_buf, VB2_BUF_STATE_ERROR);
+ vb2_buffer_done(&dev->next_frm->vb.vb2_buf,
+ VB2_BUF_STATE_ERROR);
+ }
+ dev->cur_frm = NULL;
+ dev->next_frm = NULL;
+ spin_unlock_irqrestore(&dev->dma_queue_lock, flags);
+
+ if (v4l2_subdev_has_op(dev->sensor, core, s_power)) {
+ if (v4l2_subdev_call(dev->sensor, core, s_power, 0) < 0)
+ unicam_err(dev, "power off failed in subdev\n");
+ }
+
+ clk_disable_unprepare(dev->clock);
+ unicam_runtime_put(dev);
+}
+
+static int unicam_enum_input(struct file *file, void *priv,
+ struct v4l2_input *inp)
+{
+ struct unicam_device *dev = video_drvdata(file);
+
+ if (inp->index != 0)
+ return -EINVAL;
+
+ inp->type = V4L2_INPUT_TYPE_CAMERA;
+ if (v4l2_subdev_has_op(dev->sensor, video, s_dv_timings)) {
+ inp->capabilities = V4L2_IN_CAP_DV_TIMINGS;
+ inp->std = 0;
+ } else if (v4l2_subdev_has_op(dev->sensor, video, s_std)) {
+ inp->capabilities = V4L2_IN_CAP_STD;
+ if (v4l2_subdev_call(dev->sensor, video, g_tvnorms, &inp->std)
+ < 0)
+ inp->std = V4L2_STD_ALL;
+ } else {
+ inp->capabilities = 0;
+ inp->std = 0;
+ }
+ sprintf(inp->name, "Camera 0");
+ return 0;
+}
+
+static int unicam_g_input(struct file *file, void *priv, unsigned int *i)
+{
+ *i = 0;
+
+ return 0;
+}
+
+static int unicam_s_input(struct file *file, void *priv, unsigned int i)
+{
+ /*
+ * FIXME: Ideally we would like to be able to query the source
+ * subdevice for information over the input connectors it supports,
+ * and map that through in to a call to video_ops->s_routing.
+ * There is no infrastructure support for defining that within
+ * devicetree at present. Until that is implemented we can't
+ * map a user physical connector number to s_routing input number.
+ */
+ if (i > 0)
+ return -EINVAL;
+
+ return 0;
+}
+
+static int unicam_querystd(struct file *file, void *priv,
+ v4l2_std_id *std)
+{
+ struct unicam_device *dev = video_drvdata(file);
+
+ return v4l2_subdev_call(dev->sensor, video, querystd, std);
+}
+
+static int unicam_g_std(struct file *file, void *priv, v4l2_std_id *std)
+{
+ struct unicam_device *dev = video_drvdata(file);
+
+ return v4l2_subdev_call(dev->sensor, video, g_std, std);
+}
+
+static int unicam_s_std(struct file *file, void *priv, v4l2_std_id std)
+{
+ struct unicam_device *dev = video_drvdata(file);
+ int ret;
+ v4l2_std_id current_std;
+
+ ret = v4l2_subdev_call(dev->sensor, video, g_std, &current_std);
+ if (ret)
+ return ret;
+
+ if (std == current_std)
+ return 0;
+
+ if (vb2_is_busy(&dev->buffer_queue))
+ return -EBUSY;
+
+ ret = v4l2_subdev_call(dev->sensor, video, s_std, std);
+
+ /* Force recomputation of bytesperline */
+ dev->v_fmt.fmt.pix.bytesperline = 0;
+
+ unicam_reset_format(dev);
+
+ return ret;
+}
+
+static int unicam_s_edid(struct file *file, void *priv, struct v4l2_edid *edid)
+{
+ struct unicam_device *dev = video_drvdata(file);
+
+ return v4l2_subdev_call(dev->sensor, pad, set_edid, edid);
+}
+
+static int unicam_g_edid(struct file *file, void *priv, struct v4l2_edid *edid)
+{
+ struct unicam_device *dev = video_drvdata(file);
+
+ return v4l2_subdev_call(dev->sensor, pad, get_edid, edid);
+}
+
+static int unicam_g_dv_timings(struct file *file, void *priv,
+ struct v4l2_dv_timings *timings)
+{
+ struct unicam_device *dev = video_drvdata(file);
+
+ return v4l2_subdev_call(dev->sensor, video, g_dv_timings, timings);
+}
+
+static int unicam_s_dv_timings(struct file *file, void *priv,
+ struct v4l2_dv_timings *timings)
+{
+ struct unicam_device *dev = video_drvdata(file);
+ struct v4l2_dv_timings current_timings;
+ int ret;
+
+ ret = v4l2_subdev_call(dev->sensor, video, g_dv_timings,
+ &current_timings);
+
+ if (v4l2_match_dv_timings(timings, &current_timings, 0, false))
+ return 0;
+
+ if (vb2_is_busy(&dev->buffer_queue))
+ return -EBUSY;
+
+ ret = v4l2_subdev_call(dev->sensor, video, s_dv_timings, timings);
+
+ /* Force recomputation of bytesperline */
+ dev->v_fmt.fmt.pix.bytesperline = 0;
+
+ unicam_reset_format(dev);
+
+ return ret;
+}
+
+static int unicam_query_dv_timings(struct file *file, void *priv,
+ struct v4l2_dv_timings *timings)
+{
+ struct unicam_device *dev = video_drvdata(file);
+
+ return v4l2_subdev_call(dev->sensor, video, query_dv_timings, timings);
+}
+
+static int unicam_enum_dv_timings(struct file *file, void *priv,
+ struct v4l2_enum_dv_timings *timings)
+{
+ struct unicam_device *dev = video_drvdata(file);
+
+ return v4l2_subdev_call(dev->sensor, pad, enum_dv_timings, timings);
+}
+
+static int unicam_dv_timings_cap(struct file *file, void *priv,
+ struct v4l2_dv_timings_cap *cap)
+{
+ struct unicam_device *dev = video_drvdata(file);
+
+ return v4l2_subdev_call(dev->sensor, pad, dv_timings_cap, cap);
+}
+
+static int unicam_subscribe_event(struct v4l2_fh *fh,
+ const struct v4l2_event_subscription *sub)
+{
+ switch (sub->type) {
+ case V4L2_EVENT_SOURCE_CHANGE:
+ return v4l2_event_subscribe(fh, sub, 4, NULL);
+ }
+
+ return v4l2_ctrl_subscribe_event(fh, sub);
+}
+
+static int unicam_log_status(struct file *file, void *fh)
+{
+ struct unicam_device *dev = video_drvdata(file);
+ struct unicam_cfg *cfg = &dev->cfg;
+ u32 reg;
+
+ /* status for sub devices */
+ v4l2_device_call_all(&dev->v4l2_dev, 0, core, log_status);
+
+ unicam_info(dev, "-----Receiver status-----\n");
+ unicam_info(dev, "V4L2 width/height: %ux%u\n",
+ dev->v_fmt.fmt.pix.width, dev->v_fmt.fmt.pix.height);
+ unicam_info(dev, "Mediabus format: %08x\n", dev->fmt->code);
+ unicam_info(dev, "V4L2 format: " V4L2_FOURCC_CONV "\n",
+ V4L2_FOURCC_CONV_ARGS(dev->v_fmt.fmt.pix.pixelformat));
+ reg = reg_read(&dev->cfg, UNICAM_IPIPE);
+ unicam_info(dev, "Unpacking/packing: %u / %u\n",
+ get_field(reg, UNICAM_PUM_MASK),
+ get_field(reg, UNICAM_PPM_MASK));
+ unicam_info(dev, "----Live data----\n");
+ unicam_info(dev, "Programmed stride: %4u\n",
+ reg_read(cfg, UNICAM_IBLS));
+ unicam_info(dev, "Detected resolution: %ux%u\n",
+ reg_read(cfg, UNICAM_IHSTA),
+ reg_read(cfg, UNICAM_IVSTA));
+ unicam_info(dev, "Write pointer: %08x\n",
+ reg_read(cfg, UNICAM_IBWP));
+
+ return 0;
+}
+
+static void unicam_notify(struct v4l2_subdev *sd,
+ unsigned int notification, void *arg)
+{
+ struct unicam_device *dev =
+ container_of(sd->v4l2_dev, struct unicam_device, v4l2_dev);
+
+ switch (notification) {
+ case V4L2_DEVICE_NOTIFY_EVENT:
+ v4l2_event_queue(&dev->video_dev, arg);
+ break;
+ default:
+ break;
+ }
+}
+
+static const struct vb2_ops unicam_video_qops = {
+ .wait_prepare = vb2_ops_wait_prepare,
+ .wait_finish = vb2_ops_wait_finish,
+ .queue_setup = unicam_queue_setup,
+ .buf_prepare = unicam_buffer_prepare,
+ .buf_queue = unicam_buffer_queue,
+ .start_streaming = unicam_start_streaming,
+ .stop_streaming = unicam_stop_streaming,
+};
+
+/* unicam capture driver file operations */
+static const struct v4l2_file_operations unicam_fops = {
+ .owner = THIS_MODULE,
+ .open = v4l2_fh_open,
+ .release = vb2_fop_release,
+ .read = vb2_fop_read,
+ .poll = vb2_fop_poll,
+ .unlocked_ioctl = video_ioctl2,
+ .mmap = vb2_fop_mmap,
+};
+
+/* unicam capture ioctl operations */
+static const struct v4l2_ioctl_ops unicam_ioctl_ops = {
+ .vidioc_querycap = unicam_querycap,
+ .vidioc_enum_fmt_vid_cap = unicam_enum_fmt_vid_cap,
+ .vidioc_g_fmt_vid_cap = unicam_g_fmt_vid_cap,
+ .vidioc_s_fmt_vid_cap = unicam_s_fmt_vid_cap,
+ .vidioc_try_fmt_vid_cap = unicam_try_fmt_vid_cap,
+
+ .vidioc_enum_input = unicam_enum_input,
+ .vidioc_g_input = unicam_g_input,
+ .vidioc_s_input = unicam_s_input,
+
+ .vidioc_querystd = unicam_querystd,
+ .vidioc_s_std = unicam_s_std,
+ .vidioc_g_std = unicam_g_std,
+
+ .vidioc_g_edid = unicam_g_edid,
+ .vidioc_s_edid = unicam_s_edid,
+
+ .vidioc_s_dv_timings = unicam_s_dv_timings,
+ .vidioc_g_dv_timings = unicam_g_dv_timings,
+ .vidioc_query_dv_timings = unicam_query_dv_timings,
+ .vidioc_enum_dv_timings = unicam_enum_dv_timings,
+ .vidioc_dv_timings_cap = unicam_dv_timings_cap,
+
+ .vidioc_reqbufs = vb2_ioctl_reqbufs,
+ .vidioc_create_bufs = vb2_ioctl_create_bufs,
+ .vidioc_prepare_buf = vb2_ioctl_prepare_buf,
+ .vidioc_querybuf = vb2_ioctl_querybuf,
+ .vidioc_qbuf = vb2_ioctl_qbuf,
+ .vidioc_dqbuf = vb2_ioctl_dqbuf,
+ .vidioc_expbuf = vb2_ioctl_expbuf,
+ .vidioc_streamon = vb2_ioctl_streamon,
+ .vidioc_streamoff = vb2_ioctl_streamoff,
+
+ .vidioc_log_status = unicam_log_status,
+ .vidioc_subscribe_event = unicam_subscribe_event,
+ .vidioc_unsubscribe_event = v4l2_event_unsubscribe,
+};
+
+/*
+ * Adds an entry to the active_fmts array
+ * Returns non-zero if attempting to write off the end of the array.
+ */
+static int unicam_add_active_format(struct unicam_device *unicam,
+ const struct unicam_fmt *fmt)
+{
+ //Ensure we don't run off the end of the array.
+ if (unicam->num_active_fmt >= MAX_POSSIBLE_PIX_FMTS)
+ return 1;
+
+ unicam->active_fmts[unicam->num_active_fmt] = *fmt;
+ unicam_dbg(2, unicam,
+ "matched fourcc: " V4L2_FOURCC_CONV ": code: %04x idx: %d\n",
+ V4L2_FOURCC_CONV_ARGS(fmt->fourcc),
+ fmt->code, unicam->num_active_fmt);
+ unicam->num_active_fmt++;
+
+ return 0;
+}
+
+static int
+unicam_async_bound(struct v4l2_async_notifier *notifier,
+ struct v4l2_subdev *subdev,
+ struct v4l2_async_subdev *asd)
+{
+ struct unicam_device *unicam = container_of(notifier->v4l2_dev,
+ struct unicam_device, v4l2_dev);
+ struct v4l2_subdev_mbus_code_enum mbus_code;
+ int ret = 0;
+ int j;
+
+ if (unicam->sensor) {
+ unicam_info(unicam, "Rejecting subdev %s (Already set!!)",
+ subdev->name);
+ return 0;
+ }
+
+ unicam->sensor = subdev;
+ unicam_dbg(1, unicam, "Using sensor %s for capture\n", subdev->name);
+
+ /* Enumerate sub device formats and enable all matching local formats */
+ unicam->num_active_fmt = 0;
+ unicam_dbg(2, unicam, "Get supported formats...\n");
+ for (j = 0; ret != -EINVAL && ret != -ENOIOCTLCMD; ++j) {
+ const struct unicam_fmt *fmt = NULL;
+ int k;
+
+ memset(&mbus_code, 0, sizeof(mbus_code));
+ mbus_code.index = j;
+ ret = v4l2_subdev_call(subdev, pad, enum_mbus_code,
+ NULL, &mbus_code);
+ if (ret < 0) {
+ unicam_dbg(2, unicam,
+ "subdev->enum_mbus_code idx %d returned %d - continue\n",
+ j, ret);
+ continue;
+ }
+
+ unicam_dbg(2, unicam, "subdev %s: code: %04x idx: %d\n",
+ subdev->name, mbus_code.code, j);
+
+ for (k = 0; k < ARRAY_SIZE(formats); k++) {
+ if (mbus_code.code == formats[k].code) {
+ fmt = &formats[k];
+ break;
+ }
+ }
+ unicam_dbg(2, unicam, "fmt %04x returned as %p, V4L2 FOURCC %04x, csi_dt %02X\n",
+ mbus_code.code, fmt, fmt ? fmt->fourcc : 0,
+ fmt ? fmt->csi_dt : 0);
+ if (fmt) {
+ if (unicam_add_active_format(unicam, fmt)) {
+ unicam_dbg(1, unicam, "Active fmt list truncated\n");
+ break;
+ }
+ }
+ }
+ unicam_dbg(2, unicam,
+ "Done all formats\n");
+ dump_active_formats(unicam);
+
+ return 0;
+}
+
+static int unicam_probe_complete(struct unicam_device *unicam)
+{
+ struct video_device *vdev;
+ struct vb2_queue *q;
+ struct v4l2_mbus_framefmt mbus_fmt = {0};
+ const struct unicam_fmt *fmt;
+ int ret;
+
+ v4l2_set_subdev_hostdata(unicam->sensor, unicam);
+
+ unicam->v4l2_dev.notify = unicam_notify;
+
+ unicam->sensor_config = v4l2_subdev_alloc_pad_config(unicam->sensor);
+ if (!unicam->sensor_config)
+ return -ENOMEM;
+
+ ret = __subdev_get_format(unicam, &mbus_fmt);
+ if (ret) {
+ unicam_err(unicam, "Failed to get_format - ret %d\n", ret);
+ return ret;
+ }
+
+ fmt = find_format_by_code(unicam, mbus_fmt.code);
+ if (!fmt) {
+ /* Default image format not valid. Choose first active fmt. */
+ fmt = &unicam->active_fmts[0];
+ mbus_fmt.code = fmt->code;
+ ret = __subdev_set_format(unicam, &mbus_fmt);
+ if (ret)
+ return -EINVAL;
+ }
+ if (mbus_fmt.field != V4L2_FIELD_NONE) {
+ /* Interlaced not supported - disable it now. */
+ mbus_fmt.field = V4L2_FIELD_NONE;
+ ret = __subdev_set_format(unicam, &mbus_fmt);
+ if (ret)
+ return -EINVAL;
+ }
+
+ unicam->fmt = fmt;
+ unicam->v_fmt.fmt.pix.pixelformat = fmt->fourcc;
+
+ /* Read current subdev format */
+ unicam_reset_format(unicam);
+
+ if (v4l2_subdev_has_op(unicam->sensor, video, s_std)) {
+ v4l2_std_id tvnorms;
+
+ if (WARN_ON(!v4l2_subdev_has_op(unicam->sensor, video,
+ g_tvnorms)))
+ /*
+ * Subdevice should not advertise s_std but not
+ * g_tvnorms
+ */
+ return -EINVAL;
+
+ ret = v4l2_subdev_call(unicam->sensor, video,
+ g_tvnorms, &tvnorms);
+ if (WARN_ON(ret))
+ return -EINVAL;
+ unicam->video_dev.tvnorms |= tvnorms;
+ }
+
+ spin_lock_init(&unicam->dma_queue_lock);
+ mutex_init(&unicam->lock);
+
+ /* Add controls from the subdevice */
+ ret = v4l2_ctrl_add_handler(&unicam->ctrl_handler,
+ unicam->sensor->ctrl_handler, NULL);
+ if (ret < 0)
+ return ret;
+
+ q = &unicam->buffer_queue;
+ q->type = V4L2_BUF_TYPE_VIDEO_CAPTURE;
+ q->io_modes = VB2_MMAP | VB2_DMABUF | VB2_READ;
+ q->drv_priv = unicam;
+ q->ops = &unicam_video_qops;
+ q->mem_ops = &vb2_dma_contig_memops;
+ q->buf_struct_size = sizeof(struct unicam_buffer);
+ q->timestamp_flags = V4L2_BUF_FLAG_TIMESTAMP_MONOTONIC;
+ q->lock = &unicam->lock;
+ q->min_buffers_needed = 2;
+ q->dev = &unicam->pdev->dev;
+
+ ret = vb2_queue_init(q);
+ if (ret) {
+ unicam_err(unicam, "vb2_queue_init() failed\n");
+ return ret;
+ }
+
+ INIT_LIST_HEAD(&unicam->dma_queue.active);
+
+ vdev = &unicam->video_dev;
+ strlcpy(vdev->name, UNICAM_MODULE_NAME, sizeof(vdev->name));
+ vdev->release = video_device_release_empty;
+ vdev->fops = &unicam_fops;
+ vdev->ioctl_ops = &unicam_ioctl_ops;
+ vdev->v4l2_dev = &unicam->v4l2_dev;
+ vdev->vfl_dir = VFL_DIR_RX;
+ vdev->queue = q;
+ vdev->lock = &unicam->lock;
+ vdev->device_caps = V4L2_CAP_VIDEO_CAPTURE | V4L2_CAP_STREAMING |
+ V4L2_CAP_READWRITE;
+
+ /* If the source has no controls then remove our ctrl handler. */
+ if (list_empty(&unicam->ctrl_handler.ctrls))
+ unicam->v4l2_dev.ctrl_handler = NULL;
+
+ video_set_drvdata(vdev, unicam);
+ ret = video_register_device(vdev, VFL_TYPE_GRABBER, -1);
+ if (ret) {
+ unicam_err(unicam, "Unable to register video device.\n");
+ return ret;
+ }
+
+ if (!v4l2_subdev_has_op(unicam->sensor, video, s_std)) {
+ v4l2_disable_ioctl(&unicam->video_dev, VIDIOC_S_STD);
+ v4l2_disable_ioctl(&unicam->video_dev, VIDIOC_G_STD);
+ v4l2_disable_ioctl(&unicam->video_dev, VIDIOC_ENUMSTD);
+ }
+ if (!v4l2_subdev_has_op(unicam->sensor, video, querystd))
+ v4l2_disable_ioctl(&unicam->video_dev, VIDIOC_QUERYSTD);
+ if (!v4l2_subdev_has_op(unicam->sensor, video, s_dv_timings)) {
+ v4l2_disable_ioctl(&unicam->video_dev, VIDIOC_S_EDID);
+ v4l2_disable_ioctl(&unicam->video_dev, VIDIOC_G_EDID);
+ v4l2_disable_ioctl(&unicam->video_dev, VIDIOC_DV_TIMINGS_CAP);
+ v4l2_disable_ioctl(&unicam->video_dev, VIDIOC_G_DV_TIMINGS);
+ v4l2_disable_ioctl(&unicam->video_dev, VIDIOC_S_DV_TIMINGS);
+ v4l2_disable_ioctl(&unicam->video_dev, VIDIOC_ENUM_DV_TIMINGS);
+ v4l2_disable_ioctl(&unicam->video_dev, VIDIOC_QUERY_DV_TIMINGS);
+ }
+
+ ret = v4l2_device_register_subdev_nodes(&unicam->v4l2_dev);
+ if (ret) {
+ unicam_err(unicam,
+ "Unable to register subdev nodes.\n");
+ video_unregister_device(&unicam->video_dev);
+ return ret;
+ }
+
+ return 0;
+}
+
+static int unicam_async_complete(struct v4l2_async_notifier *notifier)
+{
+ struct unicam_device *unicam = container_of(notifier->v4l2_dev,
+ struct unicam_device, v4l2_dev);
+
+ return unicam_probe_complete(unicam);
+}
+
+static const struct v4l2_async_notifier_operations unicam_async_ops = {
+ .bound = unicam_async_bound,
+ .complete = unicam_async_complete,
+};
+
+static int of_unicam_connect_subdevs(struct unicam_device *dev)
+{
+ struct platform_device *pdev = dev->pdev;
+ struct device_node *parent, *ep_node = NULL, *remote_ep = NULL,
+ *sensor_node = NULL;
+ struct v4l2_fwnode_endpoint *ep;
+ struct v4l2_async_subdev *asd;
+ struct v4l2_async_subdev **subdevs = NULL;
+ unsigned int peripheral_data_lanes;
+ int ret = -EINVAL;
+ unsigned int lane;
+
+ parent = pdev->dev.of_node;
+
+ asd = &dev->asd;
+ ep = &dev->endpoint;
+
+ ep_node = of_graph_get_next_endpoint(parent, NULL);
+ if (!ep_node) {
+ unicam_dbg(3, dev, "can't get next endpoint\n");
+ goto cleanup_exit;
+ }
+
+ unicam_dbg(3, dev, "ep_node is %s\n", ep_node->name);
+
+ v4l2_fwnode_endpoint_parse(of_fwnode_handle(ep_node), ep);
+
+ for (lane = 0; lane < ep->bus.mipi_csi2.num_data_lanes; lane++) {
+ if (ep->bus.mipi_csi2.data_lanes[lane] != lane + 1) {
+ unicam_err(dev, "Local endpoint - data lane reordering not supported\n");
+ goto cleanup_exit;
+ }
+ }
+
+ peripheral_data_lanes = ep->bus.mipi_csi2.num_data_lanes;
+
+ sensor_node = of_graph_get_remote_port_parent(ep_node);
+ if (!sensor_node) {
+ unicam_dbg(3, dev, "can't get remote parent\n");
+ goto cleanup_exit;
+ }
+ unicam_dbg(3, dev, "sensor_node is %s\n", sensor_node->name);
+ asd->match_type = V4L2_ASYNC_MATCH_FWNODE;
+ asd->match.fwnode = of_fwnode_handle(sensor_node);
+
+ remote_ep = of_graph_get_remote_endpoint(ep_node);
+ if (!remote_ep) {
+ unicam_dbg(3, dev, "can't get remote-endpoint\n");
+ goto cleanup_exit;
+ }
+ unicam_dbg(3, dev, "remote_ep is %s\n", remote_ep->name);
+ v4l2_fwnode_endpoint_parse(of_fwnode_handle(remote_ep), ep);
+ unicam_dbg(3, dev, "parsed remote_ep to endpoint. nr_of_link_frequencies %u, bus_type %u\n",
+ ep->nr_of_link_frequencies, ep->bus_type);
+
+ switch (ep->bus_type) {
+ case V4L2_MBUS_CSI2:
+ if (ep->bus.mipi_csi2.num_data_lanes >
+ peripheral_data_lanes) {
+ unicam_err(dev, "Subdevice %s wants too many data lanes (%u > %u)\n",
+ sensor_node->name,
+ ep->bus.mipi_csi2.num_data_lanes,
+ peripheral_data_lanes);
+ goto cleanup_exit;
+ }
+ for (lane = 0;
+ lane < ep->bus.mipi_csi2.num_data_lanes;
+ lane++) {
+ if (ep->bus.mipi_csi2.data_lanes[lane] != lane + 1) {
+ unicam_err(dev, "Subdevice %s - incompatible data lane config\n",
+ sensor_node->name);
+ goto cleanup_exit;
+ }
+ }
+ dev->max_data_lanes = ep->bus.mipi_csi2.num_data_lanes;
+ dev->bus_flags = ep->bus.mipi_csi2.flags;
+ break;
+ case V4L2_MBUS_CCP2:
+ if (ep->bus.mipi_csi1.clock_lane != 0 ||
+ ep->bus.mipi_csi1.data_lane != 1) {
+ unicam_err(dev, "Subdevice %s incompatible lane config\n",
+ sensor_node->name);
+ goto cleanup_exit;
+ }
+ dev->max_data_lanes = 1;
+ dev->bus_flags = ep->bus.mipi_csi1.strobe;
+ break;
+ default:
+ /* Unsupported bus type */
+ unicam_err(dev, "sub-device %s is not a CSI2 or CCP2 device %d\n",
+ sensor_node->name, ep->bus_type);
+ goto cleanup_exit;
+ }
+
+ /* Store bus type - CSI2 or CCP2 */
+ dev->bus_type = ep->bus_type;
+ unicam_dbg(3, dev, "bus_type is %d\n", dev->bus_type);
+
+ /* Store Virtual Channel number */
+ dev->virtual_channel = ep->base.id;
+
+ unicam_dbg(3, dev, "v4l2-endpoint: %s\n",
+ dev->bus_type == V4L2_MBUS_CSI2 ? "CSI2" : "CCP2");
+ unicam_dbg(3, dev, "Virtual Channel=%d\n", dev->virtual_channel);
+ if (dev->bus_type == V4L2_MBUS_CSI2)
+ unicam_dbg(3, dev, "flags=0x%08x\n", ep->bus.mipi_csi2.flags);
+ unicam_dbg(3, dev, "num_data_lanes=%d\n", dev->max_data_lanes);
+
+ unicam_dbg(1, dev, "found sub-device %s\n", sensor_node->name);
+
+ subdevs = devm_kzalloc(&dev->pdev->dev, sizeof(*subdevs), GFP_KERNEL);
+ if (!subdevs) {
+ ret = -ENOMEM;
+ goto cleanup_exit;
+ }
+ subdevs[0] = asd;
+ dev->notifier.subdevs = subdevs;
+ dev->notifier.num_subdevs = 1;
+ dev->notifier.ops = &unicam_async_ops;
+ ret = v4l2_async_notifier_register(&dev->v4l2_dev,
+ &dev->notifier);
+ if (ret) {
+ unicam_err(dev, "Error registering async notifier - ret %d\n",
+ ret);
+ ret = -EINVAL;
+ }
+
+cleanup_exit:
+ if (remote_ep)
+ of_node_put(remote_ep);
+ if (sensor_node)
+ of_node_put(sensor_node);
+ if (ep_node)
+ of_node_put(ep_node);
+
+ return ret;
+}
+
+static int unicam_probe(struct platform_device *pdev)
+{
+ struct unicam_cfg *unicam_cfg;
+ struct unicam_device *unicam;
+ struct v4l2_ctrl_handler *hdl;
+ struct resource *res;
+ int ret;
+
+ unicam = devm_kzalloc(&pdev->dev, sizeof(*unicam), GFP_KERNEL);
+ if (!unicam)
+ return -ENOMEM;
+
+ unicam->pdev = pdev;
+ unicam_cfg = &unicam->cfg;
+
+ res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+ unicam_cfg->base = devm_ioremap_resource(&pdev->dev, res);
+ if (IS_ERR(unicam_cfg->base)) {
+ unicam_err(unicam, "Failed to get main io block\n");
+ return PTR_ERR(unicam_cfg->base);
+ }
+
+ res = platform_get_resource(pdev, IORESOURCE_MEM, 1);
+ unicam_cfg->clk_gate_base = devm_ioremap_resource(&pdev->dev, res);
+ if (IS_ERR(unicam_cfg->clk_gate_base)) {
+ unicam_err(unicam, "Failed to get 2nd io block\n");
+ return PTR_ERR(unicam_cfg->clk_gate_base);
+ }
+
+ unicam->clock = devm_clk_get(&pdev->dev, "lp");
+ if (IS_ERR(unicam->clock)) {
+ unicam_err(unicam, "Failed to get clock\n");
+ return PTR_ERR(unicam->clock);
+ }
+
+ ret = platform_get_irq(pdev, 0);
+ if (ret <= 0) {
+ dev_err(&pdev->dev, "No IRQ resource\n");
+ return -ENODEV;
+ }
+
+ ret = devm_request_irq(&pdev->dev, ret, unicam_isr, 0,
+ "unicam_capture0", unicam);
+ if (ret) {
+ dev_err(&pdev->dev, "Unable to request interrupt\n");
+ return -EINVAL;
+ }
+
+ ret = v4l2_device_register(&pdev->dev, &unicam->v4l2_dev);
+ if (ret) {
+ unicam_err(unicam,
+ "Unable to register v4l2 device.\n");
+ return ret;
+ }
+
+ /* Reserve space for the controls */
+ hdl = &unicam->ctrl_handler;
+ ret = v4l2_ctrl_handler_init(hdl, 16);
+ if (ret < 0)
+ goto probe_out_v4l2_unregister;
+ unicam->v4l2_dev.ctrl_handler = hdl;
+
+ /* set the driver data in platform device */
+ platform_set_drvdata(pdev, unicam);
+
+ ret = of_unicam_connect_subdevs(unicam);
+ if (ret) {
+ dev_err(&pdev->dev, "Failed to connect subdevs\n");
+ goto free_hdl;
+ }
+
+ /* Enable the block power domain */
+ pm_runtime_enable(&pdev->dev);
+
+ return 0;
+
+free_hdl:
+ v4l2_ctrl_handler_free(hdl);
+probe_out_v4l2_unregister:
+ v4l2_device_unregister(&unicam->v4l2_dev);
+ return ret;
+}
+
+static int unicam_remove(struct platform_device *pdev)
+{
+ struct unicam_device *unicam = platform_get_drvdata(pdev);
+
+ unicam_dbg(2, unicam, "%s\n", __func__);
+
+ pm_runtime_disable(&pdev->dev);
+
+ v4l2_async_notifier_unregister(&unicam->notifier);
+ v4l2_ctrl_handler_free(&unicam->ctrl_handler);
+ v4l2_device_unregister(&unicam->v4l2_dev);
+ video_unregister_device(&unicam->video_dev);
+ if (unicam->sensor_config)
+ v4l2_subdev_free_pad_config(unicam->sensor_config);
+
+ return 0;
+}
+
+static const struct of_device_id unicam_of_match[] = {
+ { .compatible = "brcm,bcm2835-unicam", },
+ { /* sentinel */ },
+};
+MODULE_DEVICE_TABLE(of, unicam_of_match);
+
+static struct platform_driver unicam_driver = {
+ .probe = unicam_probe,
+ .remove = unicam_remove,
+ .driver = {
+ .name = UNICAM_MODULE_NAME,
+ .of_match_table = of_match_ptr(unicam_of_match),
+ },
+};
+
+module_platform_driver(unicam_driver);
+
+MODULE_AUTHOR("Dave Stevenson <dave.stevenson@raspberrypi.org>");
+MODULE_DESCRIPTION("BCM2835 Unicam driver");
+MODULE_LICENSE("GPL");
+MODULE_VERSION(UNICAM_VERSION);
--- /dev/null
+++ b/drivers/media/platform/bcm2835/vc4-regs-unicam.h
@@ -0,0 +1,266 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
+
+/*
+ * Copyright (C) 2017 Raspberry Pi Trading.
+ * Dave Stevenson <dave.stevenson@raspberrypi.org>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS
+ * BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN
+ * ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN
+ * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
+ * SOFTWARE.
+ */
+
+#ifndef VC4_REGS_UNICAM_H
+#define VC4_REGS_UNICAM_H
+
+/*
+ * The following values are taken from files found within the code drop
+ * made by Broadcom for the BCM21553 Graphics Driver, predominantly in
+ * brcm_usrlib/dag/vmcsx/vcinclude/hardware_vc4.h.
+ * They have been modified to be only the register offset.
+ */
+#define UNICAM_CTRL 0x000
+#define UNICAM_STA 0x004
+#define UNICAM_ANA 0x008
+#define UNICAM_PRI 0x00c
+#define UNICAM_CLK 0x010
+#define UNICAM_CLT 0x014
+#define UNICAM_DAT0 0x018
+#define UNICAM_DAT1 0x01c
+#define UNICAM_DAT2 0x020
+#define UNICAM_DAT3 0x024
+#define UNICAM_DLT 0x028
+#define UNICAM_CMP0 0x02c
+#define UNICAM_CMP1 0x030
+#define UNICAM_CAP0 0x034
+#define UNICAM_CAP1 0x038
+#define UNICAM_ICTL 0x100
+#define UNICAM_ISTA 0x104
+#define UNICAM_IDI0 0x108
+#define UNICAM_IPIPE 0x10c
+#define UNICAM_IBSA0 0x110
+#define UNICAM_IBEA0 0x114
+#define UNICAM_IBLS 0x118
+#define UNICAM_IBWP 0x11c
+#define UNICAM_IHWIN 0x120
+#define UNICAM_IHSTA 0x124
+#define UNICAM_IVWIN 0x128
+#define UNICAM_IVSTA 0x12c
+#define UNICAM_ICC 0x130
+#define UNICAM_ICS 0x134
+#define UNICAM_IDC 0x138
+#define UNICAM_IDPO 0x13c
+#define UNICAM_IDCA 0x140
+#define UNICAM_IDCD 0x144
+#define UNICAM_IDS 0x148
+#define UNICAM_DCS 0x200
+#define UNICAM_DBSA0 0x204
+#define UNICAM_DBEA0 0x208
+#define UNICAM_DBWP 0x20c
+#define UNICAM_DBCTL 0x300
+#define UNICAM_IBSA1 0x304
+#define UNICAM_IBEA1 0x308
+#define UNICAM_IDI1 0x30c
+#define UNICAM_DBSA1 0x310
+#define UNICAM_DBEA1 0x314
+#define UNICAM_MISC 0x400
+
+/*
+ * The following bitmasks are from the kernel released by Broadcom
+ * for Android - https://android.googlesource.com/kernel/bcm/
+ * The Rhea, Hawaii, and Java chips all contain the same VideoCore4
+ * Unicam block as BCM2835, as defined in eg
+ * arch/arm/mach-rhea/include/mach/rdb_A0/brcm_rdb_cam.h and similar.
+ * Values reworked to use the kernel BIT and GENMASK macros.
+ *
+ * Some of the bit mnenomics have been amended to match the datasheet.
+ */
+/* UNICAM_CTRL Register */
+#define UNICAM_CPE BIT(0)
+#define UNICAM_MEM BIT(1)
+#define UNICAM_CPR BIT(2)
+#define UNICAM_CPM_MASK GENMASK(3, 3)
+#define UNICAM_CPM_CSI2 0
+#define UNICAM_CPM_CCP2 1
+#define UNICAM_SOE BIT(4)
+#define UNICAM_DCM_MASK GENMASK(5, 5)
+#define UNICAM_DCM_STROBE 0
+#define UNICAM_DCM_DATA 1
+#define UNICAM_SLS BIT(6)
+#define UNICAM_PFT_MASK GENMASK(11, 8)
+#define UNICAM_OET_MASK GENMASK(20, 12)
+
+/* UNICAM_STA Register */
+#define UNICAM_SYN BIT(0)
+#define UNICAM_CS BIT(1)
+#define UNICAM_SBE BIT(2)
+#define UNICAM_PBE BIT(3)
+#define UNICAM_HOE BIT(4)
+#define UNICAM_PLE BIT(5)
+#define UNICAM_SSC BIT(6)
+#define UNICAM_CRCE BIT(7)
+#define UNICAM_OES BIT(8)
+#define UNICAM_IFO BIT(9)
+#define UNICAM_OFO BIT(10)
+#define UNICAM_BFO BIT(11)
+#define UNICAM_DL BIT(12)
+#define UNICAM_PS BIT(13)
+#define UNICAM_IS BIT(14)
+#define UNICAM_PI0 BIT(15)
+#define UNICAM_PI1 BIT(16)
+#define UNICAM_FSI_S BIT(17)
+#define UNICAM_FEI_S BIT(18)
+#define UNICAM_LCI_S BIT(19)
+#define UNICAM_BUF0_RDY BIT(20)
+#define UNICAM_BUF0_NO BIT(21)
+#define UNICAM_BUF1_RDY BIT(22)
+#define UNICAM_BUF1_NO BIT(23)
+#define UNICAM_DI BIT(24)
+
+#define UNICAM_STA_MASK_ALL \
+ (UNICAM_DL + \
+ UNICAM_SBE + \
+ UNICAM_PBE + \
+ UNICAM_HOE + \
+ UNICAM_PLE + \
+ UNICAM_SSC + \
+ UNICAM_CRCE + \
+ UNICAM_IFO + \
+ UNICAM_OFO + \
+ UNICAM_PS + \
+ UNICAM_PI0 + \
+ UNICAM_PI1)
+
+/* UNICAM_ANA Register */
+#define UNICAM_APD BIT(0)
+#define UNICAM_BPD BIT(1)
+#define UNICAM_AR BIT(2)
+#define UNICAM_DDL BIT(3)
+#define UNICAM_CTATADJ_MASK GENMASK(7, 4)
+#define UNICAM_PTATADJ_MASK GENMASK(11, 8)
+
+/* UNICAM_PRI Register */
+#define UNICAM_PE BIT(0)
+#define UNICAM_PT_MASK GENMASK(2, 1)
+#define UNICAM_NP_MASK GENMASK(7, 4)
+#define UNICAM_PP_MASK GENMASK(11, 8)
+#define UNICAM_BS_MASK GENMASK(15, 12)
+#define UNICAM_BL_MASK GENMASK(17, 16)
+
+/* UNICAM_CLK Register */
+#define UNICAM_CLE BIT(0)
+#define UNICAM_CLPD BIT(1)
+#define UNICAM_CLLPE BIT(2)
+#define UNICAM_CLHSE BIT(3)
+#define UNICAM_CLTRE BIT(4)
+#define UNICAM_CLAC_MASK GENMASK(8, 5)
+#define UNICAM_CLSTE BIT(29)
+
+/* UNICAM_CLT Register */
+#define UNICAM_CLT1_MASK GENMASK(7, 0)
+#define UNICAM_CLT2_MASK GENMASK(15, 8)
+
+/* UNICAM_DATn Registers */
+#define UNICAM_DLE BIT(0)
+#define UNICAM_DLPD BIT(1)
+#define UNICAM_DLLPE BIT(2)
+#define UNICAM_DLHSE BIT(3)
+#define UNICAM_DLTRE BIT(4)
+#define UNICAM_DLSM BIT(5)
+#define UNICAM_DLFO BIT(28)
+#define UNICAM_DLSTE BIT(29)
+
+#define UNICAM_DAT_MASK_ALL (UNICAM_DLSTE + UNICAM_DLFO)
+
+/* UNICAM_DLT Register */
+#define UNICAM_DLT1_MASK GENMASK(7, 0)
+#define UNICAM_DLT2_MASK GENMASK(15, 8)
+#define UNICAM_DLT3_MASK GENMASK(23, 16)
+
+/* UNICAM_ICTL Register */
+#define UNICAM_FSIE BIT(0)
+#define UNICAM_FEIE BIT(1)
+#define UNICAM_IBOB BIT(2)
+#define UNICAM_FCM BIT(3)
+#define UNICAM_TFC BIT(4)
+#define UNICAM_LIP_MASK GENMASK(6, 5)
+#define UNICAM_LCIE_MASK GENMASK(28, 16)
+
+/* UNICAM_IDI0/1 Register */
+#define UNICAM_ID0_MASK GENMASK(7, 0)
+#define UNICAM_ID1_MASK GENMASK(15, 8)
+#define UNICAM_ID2_MASK GENMASK(23, 16)
+#define UNICAM_ID3_MASK GENMASK(31, 24)
+
+/* UNICAM_ISTA Register */
+#define UNICAM_FSI BIT(0)
+#define UNICAM_FEI BIT(1)
+#define UNICAM_LCI BIT(2)
+
+#define UNICAM_ISTA_MASK_ALL (UNICAM_FSI + UNICAM_FEI + UNICAM_LCI)
+
+/* UNICAM_IPIPE Register */
+#define UNICAM_PUM_MASK GENMASK(2, 0)
+ /* Unpacking modes */
+ #define UNICAM_PUM_NONE 0
+ #define UNICAM_PUM_UNPACK6 1
+ #define UNICAM_PUM_UNPACK7 2
+ #define UNICAM_PUM_UNPACK8 3
+ #define UNICAM_PUM_UNPACK10 4
+ #define UNICAM_PUM_UNPACK12 5
+ #define UNICAM_PUM_UNPACK14 6
+ #define UNICAM_PUM_UNPACK16 7
+#define UNICAM_DDM_MASK GENMASK(6, 3)
+#define UNICAM_PPM_MASK GENMASK(9, 7)
+ /* Packing modes */
+ #define UNICAM_PPM_NONE 0
+ #define UNICAM_PPM_PACK8 1
+ #define UNICAM_PPM_PACK10 2
+ #define UNICAM_PPM_PACK12 3
+ #define UNICAM_PPM_PACK14 4
+ #define UNICAM_PPM_PACK16 5
+#define UNICAM_DEM_MASK GENMASK(11, 10)
+#define UNICAM_DEBL_MASK GENMASK(14, 12)
+#define UNICAM_ICM_MASK GENMASK(16, 15)
+#define UNICAM_IDM_MASK GENMASK(17, 17)
+
+/* UNICAM_ICC Register */
+#define UNICAM_ICFL_MASK GENMASK(4, 0)
+#define UNICAM_ICFH_MASK GENMASK(9, 5)
+#define UNICAM_ICST_MASK GENMASK(12, 10)
+#define UNICAM_ICLT_MASK GENMASK(15, 13)
+#define UNICAM_ICLL_MASK GENMASK(31, 16)
+
+/* UNICAM_DCS Register */
+#define UNICAM_DIE BIT(0)
+#define UNICAM_DIM BIT(1)
+#define UNICAM_DBOB BIT(3)
+#define UNICAM_FDE BIT(4)
+#define UNICAM_LDP BIT(5)
+#define UNICAM_EDL_MASK GENMASK(15, 8)
+
+/* UNICAM_DBCTL Register */
+#define UNICAM_DBEN BIT(0)
+#define UNICAM_BUF0_IE BIT(1)
+#define UNICAM_BUF1_IE BIT(2)
+
+/* UNICAM_CMP[0,1] register */
+#define UNICAM_PCE BIT(31)
+#define UNICAM_GI BIT(9)
+#define UNICAM_CPH BIT(8)
+#define UNICAM_PCVC_MASK GENMASK(7, 6)
+#define UNICAM_PCDT_MASK GENMASK(5, 0)
+
+/* UNICAM_MISC register */
+#define UNICAM_FL0 BIT(6)
+#define UNICAM_FL1 BIT(9)
+
+#endif
Reference in New Issue View Git Blame Copy Permalink