mirror of
https://github.com/openwrt/openwrt.git
synced 2024-12-23 15:32:33 +00:00
84d489f64f
Changelog: https://cdn.kernel.org/pub/linux/kernel/v4.x/ChangeLog-4.4.14 Some manual changes to target/linux/generic/patches-4.4/610- netfilter_match_bypass_default_checks.patch were needed. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
161 lines
3.2 KiB
Diff
161 lines
3.2 KiB
Diff
From f26cc3733bdd697bd81ae505fc133fa7c9b6ea19 Mon Sep 17 00:00:00 2001
|
|
From: Mathieu Olivari <mathieu@codeaurora.org>
|
|
Date: Tue, 7 Apr 2015 19:58:58 -0700
|
|
Subject: [PATCH] ARM: dts: qcom: add initial DB149 device-tree
|
|
|
|
Add basic DB149 (IPQ806x based platform) device-tree. It supports UART,
|
|
SATA, USB2, USB3 and NOR flash.
|
|
|
|
Signed-off-by: Mathieu Olivari <mathieu@codeaurora.org>
|
|
---
|
|
arch/arm/boot/dts/Makefile | 1 +
|
|
arch/arm/boot/dts/qcom-ipq8064-db149.dts | 132 +++++++++++++++++++++++++++++++
|
|
2 files changed, 133 insertions(+)
|
|
create mode 100644 arch/arm/boot/dts/qcom-ipq8064-db149.dts
|
|
|
|
--- a/arch/arm/boot/dts/Makefile
|
|
+++ b/arch/arm/boot/dts/Makefile
|
|
@@ -506,6 +506,7 @@ dtb-$(CONFIG_ARCH_QCOM) += \
|
|
qcom-apq8084-ifc6540.dtb \
|
|
qcom-apq8084-mtp.dtb \
|
|
qcom-ipq8064-ap148.dtb \
|
|
+ qcom-ipq8064-db149.dtb \
|
|
qcom-msm8660-surf.dtb \
|
|
qcom-msm8960-cdp.dtb \
|
|
qcom-msm8974-sony-xperia-honami.dtb
|
|
--- /dev/null
|
|
+++ b/arch/arm/boot/dts/qcom-ipq8064-db149.dts
|
|
@@ -0,0 +1,132 @@
|
|
+#include "qcom-ipq8064-v1.0.dtsi"
|
|
+
|
|
+/ {
|
|
+ model = "Qualcomm IPQ8064/DB149";
|
|
+ compatible = "qcom,ipq8064-db149", "qcom,ipq8064";
|
|
+
|
|
+ reserved-memory {
|
|
+ #address-cells = <1>;
|
|
+ #size-cells = <1>;
|
|
+ ranges;
|
|
+ rsvd@41200000 {
|
|
+ reg = <0x41200000 0x300000>;
|
|
+ no-map;
|
|
+ };
|
|
+ };
|
|
+
|
|
+ alias {
|
|
+ serial0 = &uart2;
|
|
+ };
|
|
+
|
|
+ chosen {
|
|
+ linux,stdout-path = "serial0:115200n8";
|
|
+ };
|
|
+
|
|
+ soc {
|
|
+ pinmux@800000 {
|
|
+ i2c4_pins: i2c4_pinmux {
|
|
+ pins = "gpio12", "gpio13";
|
|
+ function = "gsbi4";
|
|
+ bias-disable;
|
|
+ };
|
|
+
|
|
+ spi_pins: spi_pins {
|
|
+ mux {
|
|
+ pins = "gpio18", "gpio19", "gpio21";
|
|
+ function = "gsbi5";
|
|
+ drive-strength = <10>;
|
|
+ bias-none;
|
|
+ };
|
|
+ };
|
|
+ };
|
|
+
|
|
+ gsbi2: gsbi@12480000 {
|
|
+ qcom,mode = <GSBI_PROT_I2C_UART>;
|
|
+ status = "ok";
|
|
+ uart2: serial@12490000 {
|
|
+ status = "ok";
|
|
+ };
|
|
+ };
|
|
+
|
|
+ gsbi5: gsbi@1a200000 {
|
|
+ qcom,mode = <GSBI_PROT_SPI>;
|
|
+ status = "ok";
|
|
+
|
|
+ spi4: spi@1a280000 {
|
|
+ status = "ok";
|
|
+ spi-max-frequency = <50000000>;
|
|
+
|
|
+ pinctrl-0 = <&spi_pins>;
|
|
+ pinctrl-names = "default";
|
|
+
|
|
+ cs-gpios = <&qcom_pinmux 20 0>;
|
|
+
|
|
+ flash: m25p80@0 {
|
|
+ compatible = "s25fl256s1";
|
|
+ #address-cells = <1>;
|
|
+ #size-cells = <1>;
|
|
+ spi-max-frequency = <50000000>;
|
|
+ reg = <0>;
|
|
+ m25p,fast-read;
|
|
+
|
|
+ partition@0 {
|
|
+ label = "lowlevel_init";
|
|
+ reg = <0x0 0x1b0000>;
|
|
+ };
|
|
+
|
|
+ partition@1 {
|
|
+ label = "u-boot";
|
|
+ reg = <0x1b0000 0x80000>;
|
|
+ };
|
|
+
|
|
+ partition@2 {
|
|
+ label = "u-boot-env";
|
|
+ reg = <0x230000 0x40000>;
|
|
+ };
|
|
+
|
|
+ partition@3 {
|
|
+ label = "caldata";
|
|
+ reg = <0x270000 0x40000>;
|
|
+ };
|
|
+
|
|
+ partition@4 {
|
|
+ label = "firmware";
|
|
+ reg = <0x2b0000 0x1d50000>;
|
|
+ };
|
|
+ };
|
|
+ };
|
|
+ };
|
|
+
|
|
+ sata-phy@1b400000 {
|
|
+ status = "ok";
|
|
+ };
|
|
+
|
|
+ sata@29000000 {
|
|
+ status = "ok";
|
|
+ };
|
|
+
|
|
+ phy@100f8800 { /* USB3 port 1 HS phy */
|
|
+ status = "ok";
|
|
+ };
|
|
+
|
|
+ phy@100f8830 { /* USB3 port 1 SS phy */
|
|
+ status = "ok";
|
|
+ };
|
|
+
|
|
+ phy@110f8800 { /* USB3 port 0 HS phy */
|
|
+ status = "ok";
|
|
+ };
|
|
+
|
|
+ phy@110f8830 { /* USB3 port 0 SS phy */
|
|
+ status = "ok";
|
|
+ };
|
|
+
|
|
+ usb30@0 {
|
|
+ status = "ok";
|
|
+ };
|
|
+
|
|
+ usb30@1 {
|
|
+ status = "ok";
|
|
+ };
|
|
+ };
|
|
+};
|