mirror of
https://github.com/openwrt/openwrt.git
synced 2024-12-27 01:11:14 +00:00
2c9aff289e
Specifications: - SoC: Qualcomm QCA9558 (720 MHz) - RAM: 256MB - Storage: 1MB NOR, 128 MB NAND flash - Ethernet: 1x1000M Installation: 1. Connect to serial console on the board 2. Boot initramfs image over u-boot 3. Copy image to the device and run sysupgrade Installation without serial console is not supported at this time Signed-off-by: Felix Fietkau <nbd@nbd.name>
218 lines
4.9 KiB
C
218 lines
4.9 KiB
C
/*
|
|
* Nokia WI2A-AC200i support
|
|
*
|
|
* Copyright (c) 2012 Qualcomm Atheros
|
|
* Copyright (c) 2012-2013 Gabor Juhos <juhosg@openwrt.org>
|
|
* Copyright (c) 2017 Felix Fietkau <nbd@nbd.name>
|
|
*
|
|
* Permission to use, copy, modify, and/or distribute this software for any
|
|
* purpose with or without fee is hereby granted, provided that the above
|
|
* copyright notice and this permission notice appear in all copies.
|
|
*
|
|
* THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
|
|
* WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
|
|
* MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
|
|
* ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
|
|
* WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
|
|
* ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
|
|
* OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
|
|
*
|
|
*/
|
|
|
|
#include <linux/platform_device.h>
|
|
#include <linux/mtd/mtd.h>
|
|
#include <linux/mtd/partitions.h>
|
|
#include <linux/platform/ar934x_nfc.h>
|
|
|
|
#include <asm/mach-ath79/ar71xx_regs.h>
|
|
#include <asm/fw/fw.h>
|
|
|
|
#include "common.h"
|
|
#include "pci.h"
|
|
#include "dev-ap9x-pci.h"
|
|
#include "dev-gpio-buttons.h"
|
|
#include "dev-eth.h"
|
|
#include "dev-leds-gpio.h"
|
|
#include "dev-m25p80.h"
|
|
#include "dev-nfc.h"
|
|
#include "dev-usb.h"
|
|
#include "dev-wmac.h"
|
|
#include "machtypes.h"
|
|
|
|
#define AC200I_GPIO_BTN_RESET 17
|
|
|
|
#define AC200I_KEYS_POLL_INTERVAL 20 /* msecs */
|
|
#define AC200I_KEYS_DEBOUNCE_INTERVAL (3 * AC200I_KEYS_POLL_INTERVAL)
|
|
|
|
#define AC200I_MAC_ADDR 0x1f040249
|
|
#define AC200I_MAC1_OFFSET 6
|
|
#define AC200I_WMAC_CALDATA_ADDR 0x1f061000
|
|
|
|
static struct gpio_led ac200i_leds_gpio[] __initdata = {
|
|
{
|
|
.name = "nokia:red:wlan-2g",
|
|
.gpio = 0,
|
|
.active_low = 1,
|
|
},
|
|
{
|
|
.name = "nokia:green:power",
|
|
.gpio = 1,
|
|
.active_low = 1,
|
|
},
|
|
{
|
|
.name = "nokia:green:wlan-2g",
|
|
.gpio = 2,
|
|
.active_low = 1,
|
|
},
|
|
{
|
|
.name = "nokia:green:ctrl",
|
|
.gpio = 3,
|
|
.active_low = 1,
|
|
},
|
|
{
|
|
.name = "nokia:green:eth",
|
|
.gpio = 4,
|
|
.active_low = 1,
|
|
},
|
|
{
|
|
.name = "nokia:red:power",
|
|
.gpio = 13,
|
|
.active_low = 1,
|
|
},
|
|
{
|
|
.name = "nokia:red:eth",
|
|
.gpio = 14,
|
|
.active_low = 1,
|
|
},
|
|
{
|
|
.name = "nokia:red:wlan-5g",
|
|
.gpio = 18,
|
|
.active_low = 1,
|
|
},
|
|
{
|
|
.name = "nokia:green:wlan-5g",
|
|
.gpio = 19,
|
|
.active_low = 1,
|
|
},
|
|
{
|
|
.name = "nokia:red:ctrl",
|
|
.gpio = 20,
|
|
.active_low = 1,
|
|
},
|
|
};
|
|
|
|
static struct gpio_keys_button ac200i_gpio_keys[] __initdata = {
|
|
{
|
|
.desc = "Reset button",
|
|
.type = EV_KEY,
|
|
.code = KEY_RESTART,
|
|
.debounce_interval = AC200I_KEYS_DEBOUNCE_INTERVAL,
|
|
.gpio = AC200I_GPIO_BTN_RESET,
|
|
.active_low = 1,
|
|
},
|
|
};
|
|
|
|
static struct mtd_partition ac200i_nand_partitions[] = {
|
|
{
|
|
.name = "cfg",
|
|
.offset = 0x0100000,
|
|
.size = 0x1800000,
|
|
.mask_flags = MTD_WRITEABLE,
|
|
},
|
|
{
|
|
.name = "kernel",
|
|
.offset = 0x2000000,
|
|
.size = 0x0400000,
|
|
},
|
|
{
|
|
.name = "ubi",
|
|
.offset = 0x2400000,
|
|
.size = 0x2000000,
|
|
},
|
|
{
|
|
.name = "kernel",
|
|
.offset = 0x5000000,
|
|
.size = 0x0400000,
|
|
},
|
|
{
|
|
.name = "ubi",
|
|
.offset = 0x5400000,
|
|
.size = 0x2000000,
|
|
},
|
|
};
|
|
|
|
static const char *boot_getenv(const char *key)
|
|
{
|
|
const char *start = (const char *) KSEG1ADDR(0x1f070000);
|
|
const char *end = start + 0x20000;
|
|
const char *addr;
|
|
|
|
for (addr = start + 4;
|
|
*addr && *addr != 0xff && addr < end &&
|
|
strnlen(addr, end - addr) < end - addr;
|
|
addr += strnlen(addr, end - addr) + 1) {
|
|
const char *val;
|
|
|
|
val = strchr(addr, '=');
|
|
if (!val)
|
|
continue;
|
|
|
|
if (strncmp(addr, key, val - addr))
|
|
continue;
|
|
|
|
return val + 1;
|
|
}
|
|
return NULL;
|
|
}
|
|
|
|
static void __init ac200i_setup(void)
|
|
{
|
|
const char *img;
|
|
u8 *wmac = (u8 *) KSEG1ADDR(AC200I_WMAC_CALDATA_ADDR);
|
|
u8 *mac_addr = (u8 *) KSEG1ADDR(AC200I_MAC_ADDR);
|
|
|
|
ath79_register_m25p80(NULL);
|
|
|
|
ath79_register_leds_gpio(-1, ARRAY_SIZE(ac200i_leds_gpio),
|
|
ac200i_leds_gpio);
|
|
ath79_register_gpio_keys_polled(-1, AC200I_KEYS_POLL_INTERVAL,
|
|
ARRAY_SIZE(ac200i_gpio_keys),
|
|
ac200i_gpio_keys);
|
|
|
|
ath79_register_usb();
|
|
ath79_nfc_set_parts(ac200i_nand_partitions,
|
|
ARRAY_SIZE(ac200i_nand_partitions));
|
|
ath79_nfc_set_ecc_mode(AR934X_NFC_ECC_HW);
|
|
ath79_register_nfc();
|
|
|
|
ath79_register_wmac(wmac, NULL);
|
|
|
|
ath79_register_mdio(0, 0x0);
|
|
ath79_init_mac(ath79_eth0_data.mac_addr, mac_addr, 0);
|
|
|
|
/* GMAC0 is connected to the SGMII interface */
|
|
ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_SGMII;
|
|
ath79_eth0_data.phy_mask = BIT(4);
|
|
ath79_eth0_data.mii_bus_dev = &ath79_mdio0_device.dev;
|
|
ath79_eth0_pll_data.pll_1000 = 0x03000101;
|
|
ath79_eth0_pll_data.pll_100 = 0x80000101;
|
|
ath79_eth0_pll_data.pll_10 = 0x80001313;
|
|
|
|
img = boot_getenv("dualPartition");
|
|
if (img && !strcmp(img, "imgA")) {
|
|
ac200i_nand_partitions[3].name = "kernel_alt";
|
|
ac200i_nand_partitions[4].name = "ubi_alt";
|
|
} else {
|
|
ac200i_nand_partitions[1].name = "kernel_alt";
|
|
ac200i_nand_partitions[2].name = "ubi_alt";
|
|
}
|
|
|
|
ath79_register_eth(0);
|
|
|
|
ath79_register_pci();
|
|
}
|
|
|
|
MIPS_MACHINE(ATH79_MACH_WI2A_AC200I, "WI2A-AC200i",
|
|
"Nokia WI2A-AC200i",
|
|
ac200i_setup);
|