openwrt/target/linux/brcm63xx/patches-3.10/533-board_rta770bw.patch
Jonas Gorski e5cadabb58 brcm63xx: Fix HW553 support
- adsl and lan leds are swapped.
- internetkey is labeled as hspa.
- enable status led and reset button for failsafe.
- use new leds script.
- fix switch configuration.
- remove enet0 from board_info.
- add profile.

Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
Signed-off-by: Jonas Gorski <jogo@openwrt.org>

SVN-Revision: 41588
2014-07-12 12:31:39 +00:00

67 lines
1.2 KiB
Diff

--- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
+++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
@@ -773,6 +773,55 @@ static struct board_info __initdata boar
.has_uart0 = 1,
};
+
+static struct board_info __initdata board_rta770bw = {
+ .name = "RTA770BW",
+ .expected_cpu_id = 0x6345,
+
+ .has_uart0 = 1,
+
+ .has_enet0 = 1,
+
+ .enet0 = {
+ .has_phy = 1,
+ .phy_id = 0,
+ .force_speed_100 = 1,
+ .force_duplex_full = 1,
+ },
+
+ .leds = {
+ {
+ .name = "RTA770BW:green:usb",
+ .gpio = 7,
+ .active_low = 1,
+ },
+ {
+ .name = "RTA770BW:green:adsl",
+ .gpio = 8,
+ },
+ {
+ .name = "RTA770BW:green:diag",
+ .gpio = 10,
+ .active_low = 1,
+ },
+ {
+ .name = "RTA770BW:green:wlan",
+ .gpio = 11,
+ .active_low = 1,
+ },
+ },
+
+ .buttons = {
+ {
+ .desc = "reset",
+ .gpio = 13,
+ .type = EV_KEY,
+ .code = KEY_RESTART,
+ .active_low = 1,
+ .debounce_interval = BCM963XX_KEYS_DEBOUNCE_INTERVAL,
+ },
+ },
+};
#endif
/*
@@ -3226,6 +3275,7 @@ static const struct board_info __initcon
#endif
#ifdef CONFIG_BCM63XX_CPU_6345
&board_96345gw2,
+ &board_rta770bw,
#endif
#ifdef CONFIG_BCM63XX_CPU_6348
&board_96348r,