openwrt/target/linux/mediatek/patches-5.10/710-pci-pcie-mediatek-add-support-for-coherent-DMA.patch
Nick Hainke e8e2b88f5f mediatek: mt7623: import patch to fix msi warning
The 1st generation MediaTek PCIe host bridge cannot handle Message
Signaled Interrupts (MSIs). The core PCI code is not aware that MSI is
not available. This results in warnings of the form:

WARNING: CPU: 2 PID: 112 at include/linux/msi.h:219
  pci_msi_setup_msi_irqs.constprop.8+0x64/0x6c
Modules linked in: ahci(+) libahci libata sd_mod scsi_mod
  gpio_button_hotplug
CPU: 2 PID: 112 Comm: kmodloader Not tainted 5.10.52 #0
Hardware name: Mediatek Cortex-A7 (Device Tree)

Import patches that introduce the 'no_msi' attribute to signal missing
MSI support to the core PCI.

Refresh patches:
- 000-spi-fix-fifo.patch
- 330-mtk-bmt-support.patch
- 510-net-mediatek-add-flow-offload-for-mt7623.patch
- 601-PCI-mediatek-Use-regmap-to-get-shared-pcie-cfg-base.patch
- 610-pcie-mediatek-fix-clearing-interrupt-status.patch
- 700-net-ethernet-mtk_eth_soc-add-support-for-coherent-DM.patch
- 710-pci-pcie-mediatek-add-support-for-coherent-DMA.patch

Signed-off-by: Nick Hainke <vincent@systemli.org>
2021-07-29 15:08:17 +01:00

109 lines
2.8 KiB
Diff

From: Felix Fietkau <nbd@nbd.name>
Date: Fri, 4 Sep 2020 18:42:42 +0200
Subject: [PATCH] pci: pcie-mediatek: add support for coherent DMA
It improves performance by eliminating the need for a cache flush for DMA on
attached devices
Signed-off-by: Felix Fietkau <nbd@nbd.name>
---
--- a/arch/arm64/boot/dts/mediatek/mt7622.dtsi
+++ b/arch/arm64/boot/dts/mediatek/mt7622.dtsi
@@ -812,6 +812,8 @@
reg = <0 0x1a143000 0 0x1000>;
reg-names = "port0";
mediatek,pcie-cfg = <&pciecfg>;
+ mediatek,hifsys = <&hifsys>;
+ mediatek,cci-control = <&cci_control2>;
#address-cells = <3>;
#size-cells = <2>;
interrupts = <GIC_SPI 228 IRQ_TYPE_LEVEL_LOW>;
@@ -829,6 +831,7 @@
bus-range = <0x00 0xff>;
ranges = <0x82000000 0 0x20000000 0x0 0x20000000 0 0x8000000>;
status = "disabled";
+ dma-coherent;
slot0: pcie@0,0 {
reg = <0x0000 0 0 0 0>;
@@ -855,6 +858,8 @@
reg = <0 0x1a145000 0 0x1000>;
reg-names = "port1";
mediatek,pcie-cfg = <&pciecfg>;
+ mediatek,hifsys = <&hifsys>;
+ mediatek,cci-control = <&cci_control2>;
#address-cells = <3>;
#size-cells = <2>;
interrupts = <GIC_SPI 229 IRQ_TYPE_LEVEL_LOW>;
@@ -873,6 +878,7 @@
bus-range = <0x00 0xff>;
ranges = <0x82000000 0 0x28000000 0x0 0x28000000 0 0x8000000>;
status = "disabled";
+ dma-coherent;
slot1: pcie@1,0 {
reg = <0x0800 0 0 0 0>;
@@ -932,6 +938,11 @@
};
};
+ hifsys: syscon@1af00000 {
+ compatible = "mediatek,mt7622-hifsys", "syscon";
+ reg = <0 0x1af00000 0 0x70>;
+ };
+
ethsys: syscon@1b000000 {
compatible = "mediatek,mt7622-ethsys",
"syscon";
--- a/drivers/pci/controller/pcie-mediatek.c
+++ b/drivers/pci/controller/pcie-mediatek.c
@@ -20,6 +20,7 @@
#include <linux/of_address.h>
#include <linux/of_pci.h>
#include <linux/of_platform.h>
+#include <linux/of_address.h>
#include <linux/pci.h>
#include <linux/phy/phy.h>
#include <linux/platform_device.h>
@@ -139,6 +140,11 @@
#define PCIE_LINK_STATUS_V2 0x804
#define PCIE_PORT_LINKUP_V2 BIT(10)
+/* DMA channel mapping */
+#define HIFSYS_DMA_AG_MAP 0x008
+#define HIFSYS_DMA_AG_MAP_PCIE0 BIT(0)
+#define HIFSYS_DMA_AG_MAP_PCIE1 BIT(1)
+
struct mtk_pcie_port;
/**
@@ -1042,6 +1048,27 @@ static int mtk_pcie_setup(struct mtk_pci
struct mtk_pcie_port *port, *tmp;
int err;
+ if (of_dma_is_coherent(node)) {
+ struct regmap *con;
+ u32 mask;
+
+ con = syscon_regmap_lookup_by_phandle(node,
+ "mediatek,cci-control");
+ /* enable CPU/bus coherency */
+ if (!IS_ERR(con))
+ regmap_write(con, 0, 3);
+
+ con = syscon_regmap_lookup_by_phandle(node,
+ "mediatek,hifsys");
+ if (IS_ERR(con)) {
+ dev_err(dev, "missing hifsys node\n");
+ return PTR_ERR(con);
+ }
+
+ mask = HIFSYS_DMA_AG_MAP_PCIE0 | HIFSYS_DMA_AG_MAP_PCIE1;
+ regmap_update_bits(con, HIFSYS_DMA_AG_MAP, mask, mask);
+ }
+
for_each_available_child_of_node(node, child) {
int slot;